فروش توشیبا استودیو پایین ترین فتوکپی بهترین فتوکپی tj,;\d tv,a دستگاه فتوکپی چگونه کار می کند؟فروش توشیبا استودیو 6530 "فتوکپی, فتوکپی توشیبا , فتوکپی توشیبا استودیو, فتوکپی توشیبا استودیو, فتوکپی توشیبا استودیو E 6530, فتوکپی, توشیبا استودیو E 6530,
(0) محصول

توشیبا c6530

3803 |
بازدید
قیمت: 81,000,000 ریال
موجودی انبار: 1

توضیحات مختصر

لازم به توضیح است که با حذف ویا انتخاب هریک از فیلدهای اختیاری اعم از آپشن دستگاه ویا کارکرد آن قیمت تغیر خواهد کرد . پس قبل از خرید به با دقت مطالعه فرمایید. توشیبا استودیو c6530 دستگاه رنگی توشیبا استودیو 3530 نسل جدید دستگاه رنگی می باشد که کیفیت بسیار بالای دارد از جمله مزیتهای این دستگاه به جز اینکه کیفیت چاپ به طور فاحشی ارتقا یافته در قسمت هیتر ناخنک حدف شده این امرباعث می شود کا کرد هیتر به تعداد صد هزار برگ بیشتر شود
سازنده: Toshiba

تعداد: 

توشیبا  استودیو c6530 قیمت (استوک) 120.000.000 ریال
    کاربری رنگی اااااا سیستم لیزری
    سرعت 55 برگ در دقیقه
    دقت 600 dpi
    امکانات اختیاری اتصال به کامپیوتر - سورتر و فینیشر-ADF
    سال تولید 2007
    کشور سازنده چین - مالزی
    قیمت استوک بسته به وضعیت و امکانات 10 تا 16 میلیون ریال (به همراه سورتر)
    قیمت رفیل  بسته به وضعیت و امکانات 180 تا 220 میلیون ریال
    قیمت آکبند  قیمت کار کرده بسته به وضعیت و امکانات120 تا 140 میلیون ریال
      توشیبا  استودیو c6530 قیمت (استوک) 120.000.000 ریال
        کاربری رنگی اااااا سیستم لیزری
        سرعت 45 برگ در دقیقه
        دقت 600 dpi
        امکانات اختیاری اتصال به کامپیوتر - سورتر و فینیشر-ADF
        سال تولید 2007
        کشور سازنده چین - مالزی
        قیمت استوک بسته به وضعیت و امکانات 120 تا 180میلیون ریال (به همراه سورتر)
        قیمت رفیل بسته به وضعیت و امکانات 220تا 250 میلیون ریال
        قیمت آکبند 420  میلیون ریال
        قیمت کار کرده بسته به وضعیت و امکانات 120تا 160میلیون ریال
        توضیحات دستگاه فتوکپی رنگی توشیبا 6530 از جمله دستگاههای با کیفیت بوده و از محسنات این سری فتوکپی رنگی بصرفه بودن و بورس بودن قطعات و خدمات فنی است.
    توضیحات دستگاه فتوکپی رنگی توشیبا 6530 از جمله دستگاههای با کیفیت بوده و از محسنات این سری فتوکپی رنگی بصرفه بودن و بورس بودن قطعات و خدمات فنی است.

 

آرشیو فیلمهای آموزشی

 

 

تیزر تبیغاتی توشیبا 6530 

 

 

نوع وسیله استوک
کاربری لیزری
سرعت چاپ 65 برگ در دقیقه
دقت 1200Dpi
تعداد رنگ 4 رنگ
سطح چاپ A4, A3, A5, B4
سال تولید 2008
کشور سازنده چین, ژاپن, فرانسه, هلند
سورتر اختیاری
لارج باکس اختیاری
برد پرینتر اختیاری
فکس دارد
اسکن به فایل(Scan To File) دارد
برد اسکنر تخت
کاربری تک کاره
قابلیت تغذیه خودکار(ADF) اختیاری
حافظه 320گیگ
قابلیت کپی دارد
نوع پورت ارتباطی USB 2
نظرات

 آدرس: آذربایجان شرقی، مراغه، شهرک صنعتی خانقاه، واحد 7، شرکت کپی ایران
شماره تماس: 04137252392
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: Info@copyir.com   |  ساعات کاری: از 8 الی 22

Map Data
Map data ©2017 Google
Map DataMap data ©2017 Google
Map data ©2017 Google
Map
Satellite


فرم تماس با ما

تضمین بهترین قیمت
 
تضمین بهترین قیمت چیست؟

ما تضمین می‌کنیم محصولات عرضه شده در کپی ایران با گارانتی اصل، بالاترین کیفیت و ارزان‌ترین قیمت نسبت به سایر فروشگاه‌های فیزیکی و اینترنتی در سراسر کشور است. اگر پس از خرید از کپی ایران، متوجه شدید فروشگاهی همان کالا را با شرایط یکسان و قیمتی پایین‌تر ارائه می‌دهد، می‌توانید درخواست استفاده از «تضمین بهترین قیمت» را ارسال و در صورت تایید، اختلاف قیمت آن را به طور کامل از ما دریافت کنید.
چه شرایطی دارد؟

برای ارائه درخواست تضمین بهترین قیمت باید شرایط زیر وجود داشته باشد:

    مدل یکسان: محصولات باید از نظر ویژگی‌های فنی، رنگ، امکانات و قابلیت‌ها یکسان باشند.
    کالای اصل: از آنجایی که همه کالاهای موجود در کپی ایران اصل هستند، درخواست کالاهای غیر اصل رد خواهد شد.

3. گارانتی اصل و یکسان: کالاهای مورد مقایسه باید گارانتی و خدمات پس از فروش اصل و یکسان داشته باشند، زیرا نوع و کیفیت خدمات گارانتی‌های مختلف بر قیمت آنها نیز تاثیر می‌گذارد.

    لوازم جانبی اصلی در بسته‌بندی کارخانه: کپی ایران همه لوازم و قطعات همراه کالا که از طرف شرکت سازنده ارائه می‌شود را بدون تغییر یا کم و کاستی به مشتری تحویل می‌دهد. بنابراین محصولاتی که در سایر فروشگاه‌ها ارائه می‌شوند، در صورتی امکان مقایسه خواهند داشت که لوازم جانبی و قطعات اصل و با کیفیت به همراه داشته باشند.

5. یکسانی شرایط برای کالاهایی که دارای تاریخ تولید یا انقضا هستند، شامل تاریخ مصرف نیز می‌شود.

    فروشگاه‌ها و وب‌سایت‌های مجاز: مرجع مقایسه قیمت باید فروشگاه مجاز و وب‌سایت دارای نماد اعتماد الکترونیک از وزارت صنعت معدن و تجارت باشد.
    کالا برای فروش موجود باشد: کالا باید در زمان ارائه درخواست به کپی ایران در سایت یا فروشگاه موردنظر برای فروش موجود و قابل خریداری باشد.

8. با توجه به رسمی بودن فاکتورهای کپی ایران، فاکتور فروشگاه فیزیکی یا اینترنتی مورد مقایسه نیز باید رسمی و دارای کد اقتصادی و 9% مالیات بر ارزش افزوده باشد.

9. با توجه به لزوم یکسان بودن شرایط مقایسه، اگر لحاظ کردن مواردی مانند هزینه حمل و نقل یا مالیات بر ارزش افزوده، قیمت اولیه اعلام شده توسط فروشنده یا فروشگاه اینترنتی مورد مقایسه را تغییر دهد، ملاک مقایسه قیمت کپی ایران، مبلغ نهایی پرداخت شده توسط خریدار خواهد بود.

10.درمورددستگاهای استوک ملاک شرایط مذبور می باشد .

1.مدل دستگاه

2.آپشن های مورد نظر

3.کارکرد دستگاه یعنی دارای شناسنامه باشد که دستگاه مذبور در کجا کار کرده وچه قطعاتی در چه کارکردی تعویض شده است

4.زمان فروش مواد مصرفی آکبند برای شما تحویل داده شده است یا خیر

چگونه درخواست بفرستید؟

مدارک زیر را همراه فاکتور خود، به آدرس ایمیل www.copyir@yahoo.comارسال کنید:

1. پیش‌فاکتور فروشگاه به صورت عکس یا فایل اسکن شده؛ پیش فاکتور باید:

- شامل نام فروشگاه، اطلاعات تماس، آدرس و مهر فروشگاه، نام خریدار، تاریخ و مدت اعتبار پیش فاکتور، اطلاعات محصول و نام گارانتی مربوط به آن باشد.

- تا 24 ساعت بعد از زمان ارسال ایمیل توسط مشتری دارای اعتبار  و کالا در آن فروشگاه موجود و قابل خریداری باشد.

- صرفا برای همان محصول به صورت تکی باشد.

2. در فروشگاه‌های اینترنتی، کافی‌ست آدرس فروشگاه اینترنتی و لینک مستقیم صفحه کالای مورد مقایسه به آدرس ایمیل ذکر شده ارسال شود. بدیهی است که اگر به وب سایت‌های مرجع مقایسه قیمت لینک داده شود، ایمیل ارسالی قابل بررسی نخواهد بود.

چه زمانی درخواست بفرستید؟

درخواست مشتری باید حداکثر تا 48 ساعت بعد از فاکتور شدن سفارش، ارسال شود.

بررسی ثبت درخواست تا حداکثر 3 روز کاری انجام می‌شود.

پس از ارسال استعلام و در صورت تایید قیمت پایین‌تر، اضافه مبلغ پرداخت شده را به حساب شخص واریز می‌کنیم.

سوال دارید؟

با شماره تلفن 04136589016 – داخلی 8 (خدمات پس از فروش) تماس بگیرید.
 
قوانین

در صورت مشاهده تخلف یا تلاش برای سوءاستفاده از این طرح، حق عدم پذیرش آن درخواست برای کپی ایران محفوظ است.

کپی ایران می‌تواند در هر زمان به تشخیص خود شرایط تضمین بهترین قیمت را تغییر داده یا ارائه آن را متوقف کند

 

ایرادات فتوکپی رنگی 450 بر اساس کد می باشد ما برا ی سهولت کار بران تمامی کدهای را در اختیار عزیزان قرار می دهیم

 

C021    Developer unit motor-YMC locking error: The developer unit motor-YMC is not rotating normally  (www.copyir.com)  
C022    Developer unit mixer motor-YMC locking error: The developer unit mixer motor-YMC is not rotating normally
C023    Developer unit motor-K locking error: The developer unit motor-K is not rotating normally  (www.copyir.com)  
C024    Developer unit mixer motor-K locking error: The developer unit mixer motor-K is not rotating normally  (www.copyir.com)  
C130    1st drawer tray abnormality: The tray-up motor is not rotating or the 1st drawer tray is not moving normally  (www.copyir.com)   (the case that paper can be fed from any drawer except the 1st drawer)
C140    2nd drawer tray abnormality: The tray-up motor is not rotating or the 2nd drawer tray is not moving normally  (www.copyir.com)   (the case that paper can be fed from any drawer except the 2nd drawer)
C150    3rd drawer tray abnormality: The 3rd drawer tray-up motor is not rotating or the 3rd drawer tray is not moving normally  (www.copyir.com)   (the case that paper can be fed from any drawer except the 3rd drawer)
C160    4th drawer tray abnormality: The 4th drawer tray-up motor is not rotating or the 4th drawer tray is not moving normally  (www.copyir.com)   (the case that paper can be fed from any drawer except the 4th drawer)
C180    LCF tray-up motor abnormality: The LCF tray-up motor is not rotating or the LCF tray is not moving normally  (www.copyir.com)   (the case that paper can be fed from any drawer except the LCF)
C1A0    LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally  (www.copyir.com)   (the case that paper can be fed from any drawer except the LCF)
C1C0    Option LCF tray-up motor abnormality: The option LCF tray-up motor is not moving normally
C260    Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON  (www.copyir.com)  
C270    (1) Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified time  (www.copyir.com)   (2) Downloading firmware with an incorrect model  (www.copyir.com)  
C280    Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time  (www.copyir.com)  
C360    Needle electrode cleaner operation abnormality
C370    Transfer belt operation abnormality
C380    Auto-toner sensor-K abnormality (upper limit)
C381    Auto-toner sensor-K abnormality (lower limit)
C382    Auto-toner sensor-K connection error
C390    Auto-toner sensor-C abnormality (upper limit)
C391    Auto-toner sensor-C abnormality (lower limit)
C392    Auto-toner sensor-C connection error
C3A0    Auto-toner sensor-M abnormality (upper limit)
C3A1    Auto-toner sensor-M abnormality (lower limit)
C3A2    Auto-toner sensor-M connection error
C3B0    Auto-toner sensor-Y abnormality (upper limit)
C3B1    Auto-toner sensor-Y abnormality (lower limit)
C3B2    Auto-toner sensor-Y connection error
C3C0    Process unit connection error
C411    Thermistor or heater lamp abnormality at power-ON: Abnormality of the thermistor is detected when power is turned ON or the temperature of the fuser belt does not rise in a specified period of time after power is turned ON  (www.copyir.com)  
C412    Thermistor/heater lamp abnormality at power-ON: Thermistor abnormality is detected at power-ON or the fuser belt temperature does not rise within a specified period of time after power-ON  (www.copyir.com)  
C443    Heater lamp abnormality after abnormality judgment (not reaching to intermediate temperature)
C445    Heater lamp abnormality after abnormality judgment (pre-running end temperature abnormality)
C446    Heater lamp abnormality after abnormality judgment (pre-running end temperature abnormality)
C447    Heater lamp abnormality after abnormality judgment (temperature abnormality at ready status)
C448    Heater lamp continuous lighting abnormality: Heater lamp lights continuously for a certain period of time when the pressure roller temperature during ready status is higher than the specified
C451    Thermopile and edge thermistor temperature difference
C452    Thermopile temperature difference
C461    Pressure roller heater 40°C detection (Not determined)
C462    Pressure roller heater 40°C detection (Determined)
C463    Pressure roller thermistor and edge thermistor temperature difference
C464    Pressure roller thermistor temperature difference
C465    Pressure roller thermistor abnormality after entering ready status (pre-running end temperature abnormality)
C466    Pressure roller thermistor abnormality after entering ready status (pre-running end temperature abnormality)
C467    Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status)
C468    Pressure roller thermistor abnormality after entering ready status (overheating)
C471    IH board initialization abnormality
C472    Power supply abnormality
C473    Surge pressure detection / power and voltage upper limit abnormality
C474    Power and voltage lower limit abnormality
C476    IH low power supply
C480    IGBT high temperature abnormality
C481    IH drive circuit abnormality
C490    IH circuit abnormality / IH coil abnormality
C4B0    Fuser unit counter abnormality
C4B1    Fuser unit voltage judgment abnormality
C4D0    Fuser belt thermopile abnormality
C4E0    Fuser unit releasing operation abnormality - Though the pressure roller is released, its position cannot be detected  (www.copyir.com)  
C4E1    Fuser unit contacting operation abnormality - Though the pressure roller is contacted, its position cannot be detected  (www.copyir.com)  
C4E2    Fuser belt rotation detection sensor abnormality - The fuser belt does not rotate or incorrectly rotates  (www.copyir.com)  
C4E3    Fuser motor rotation abnormality
C550    RADF I/F error: Communication error has occurred between the RADF and the scanner  (www.copyir.com)  
C560    Communication error between Engine-CPU and PFC board
C570    Communication error between Engine-CPU and CNV board
C580    Communication error between CNV board and finisher
C5A0    SRAM board not connected (LGC board)
C5A1    SRAM board data abnormality (LGC board)
C730    RADF EEPROM error: Data abnormality occurs during the EEPROM writing of the RADF is performed  (www.copyir.com)  
C880    RADF original feed motor abnormality: An error signal has been detected when the motor is rotating  (www.copyir.com)  
C890    RADF read motor abnormality: An error signal has been detected when the motor is rotating  (www.copyir.com)  
C8A0    RADF original reverse motor abnormality: An error signal has been detected when the motor is rotating  (www.copyir.com)  
C8B0    RADF original exit motor abnormality: An error signal has been detected when the motor is rotating  (www.copyir.com)  
C8C0    RADF original reading start sensor abnormality: The automatic adjustment for the original reading start sensor has been performed, but is ended unsuccessfully  (www.copyir.com)  
C8E0    RADF communication protocol abnormality: The system has to be stopped because the control abnormality occurred  (www.copyir.com)  
C900    Connection error between SYS board and LGC board
C940    Engine-CPU abnormality
C962    LGC board ID abnormality
C970    High-voltage transformer abnormality: Leakage of the main charger is detected  (www.copyir.com)  
C9E0    Connection error between SLG board and SYS board
CA00    Image position alignment abnormality
CA10    Polygonal motor abnormality: The polygonal motor is not rotating normally
CA20    H-Sync detection error: H-Sync signal detection PC board cannot detect laser beams  (www.copyir.com)  
CA47    SNS board abnormality: The SNS board does not operate due to disconnection or the harness breaking  (www.copyir.com)  
CB00    Finisher not connected: Communication error has occurred between the equipment and finisher  (www.copyir.com)   [MJ1103/1104]
CB01    Finisher communication error: Communication error has occurred between the equipment and finisher  (www.copyir.com)   [MJ-1103/1104]
CB10    Entrance motor abnormality: The entrance motor is not rotating normally  (www.copyir.com)   [MJ-1103/1104]
CB11    Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally  (www.copyir.com)   [MJ-1103/1104]
CB12    Buffer roller drive motor abnormality: The buffer roller drive motor is not rotating or the buffer roller is not moving normally  (www.copyir.com)   [MJ-1103/1104]
CB13    Finisher exit motor abnormality
CB14    Paper holding arm motor abnormality
CB30    Movable tray shift motor abnormality: The movable tray shift motor is not rotating or the movable tray is not moving normally  (www.copyir.com)   [MJ-1103/1104]
CB31    Movable tray paper-full detection error: The actuator of the movable tray paper-full detection sensor does not move smoothly  (www.copyir.com)   [MJ-1103/1104]
CB40    Rear aligning plate motor abnormality: Rear aligning plate motor is not rotating or aligning plate is not moving normally  (www.copyir.com)   [MJ-1103/1104] Front alignment motor abnormality: The front alignment motor is not rotating or the front alignment plate is not moving normally  (www.copyir.com)   [MJ-1103/ 1104]
CB50    Stapler home position error: The stapler home position sensor does not work  (www.copyir.com)   [MJ-1103/1104]
CB51    Stapler shift home position error: The stapler is not at the home position  (www.copyir.com)   [MJ-1103/1104]
CB60    Stapler shift motor abnormality: Stapler shift motor is not rotating or staple unit is not moving normally  (www.copyir.com)   [MJ-1103/1104]
CB80    Backup RAM data abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON
CB81    Flash ROM abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON  (www.copyir.com)   [MJ-1103/1104]
CB82    Finisher - Main CPU program error
CB83    Saddle Stitch Finisher - Main CPU program error
CB84    Hole Punch Unit - Main CPU program error
CB91    Saddle Stitch Finisher flash ROM abnormality
CB92    Saddle Stitch Finisher RAM abnormality
CB93    Additional folding motor abnormality
CB94    Saddle transport motor abnormality
CB95    Stacker motor abnormality
CBA0    Stitch motor (front) abnormality: Stitch motor (front) is not rotating or rotary cam is not moving normally  (www.copyir.com)   [MJ-1103/1104]
CBB0    Stitch motor (rear) abnormality: Stitch motor (rear) is not rotating or rotary cam is not moving normally  (www.copyir.com)   [MJ-1103/1104]
CBC0    Alignment motor abnormality: Alignment motor is not rotating or aligning plate is not moving normally  (www.copyir.com)   [MJ-1103/1104]
CBE0    Paper folding motor abnormality: Paper folding motor or paper folding roller is not rotating normally  (www.copyir.com)   [MJ-1103/1104]
CC20    Communication error between finisher and saddle stitcher: Communication error between finisher controller PC board and saddle stitcher controller board [MJ-1103/1104]
CC30    Stack transport motor abnormality: The stack transport motor is not rotating or the stack transport belt is not moving normally  (www.copyir.com)   [MJ-1103/1104]
CC31    Transport motor abnormality: The transport motor is not rotating or the stack transport roller -1 and -2 is not rotating normally  (www.copyir.com)   [MJ-1103/1104]
CC41    Paper holder cam home position abnormality: The paper holder cam is not at the home position  (www.copyir.com)   [MJ1103/1104]
CC51    Sideways adjustment motor (M2) abnormality: Sideways adjustment motor is not rotating or puncher is not shifting normally  (www.copyir.com)   [MJ-1103/1104 (when MJ-6102 is installed)]
CC52    Skew adjustment motor (M1) abnormality: Skew adjustment motor is not rotating or puncher is not shifting normally  (www.copyir.com)   [MJ-1103/1104 (when MJ-6102 is installed)]
CC60    Punch motor abnormality: Punch motor is not rotating or puncher is not shifting normally  (www.copyir.com)   [MJ1103/1104 (when MJ-6102 is installed)]
CC61    Punch motor (M3) home position detection error: Punch motor is not rotating or puncher is not shifting normally  (www.copyir.com)   [MJ-1103/1104 (when MJ-6102 is installed)]
CC71    Punch ROM checksum error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on  (www.copyir.com)   [MJ-1103/ 1104 (when MJ-6102 is installed)]
CC72    Punch RAM read/write error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on  (www.copyir.com)   [MJ-1103/ 1104 (when MJ-6102 is installed)]
CC73    Punching device power supply abnormality
CC74    Punch unit transport pulse abnormality
CC80    Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally  (www.copyir.com)   [MJ-1103/1104]
CD60    Sub-hopper toner sensors abnormality  (www.copyir.com)  
CD61    Sub-hopper toner motor-Y abnormality  (www.copyir.com)  
CD62    Sub-hopper toner motor-M abnormality  (www.copyir.com)  
CD63    Sub-hopper toner motor-C abnormality  (www.copyir.com)  
CD64    Sub-hopper toner motor-K abnormality  (www.copyir.com)  
CD71    Waste toner transport motor locking error: The auger in the waste toner transport path does not rotate  (www.copyir.com)  
CD80    TRU waste toner motor locking error: The auger (TRU side) in the TRU waste toner transport path does not rotate  (www.copyir.com)  
CD81    TRU waste toner transport motor locking error: The auger (waste toner box side) in the TRU waste toner transport path does not rotate  (www.copyir.com)  
CD82    TRU waste toner full-status error
CDE0    Paddle motor abnormality: The paddle motor is not rotating or the paddle is not rotating normally  (www.copyir.com)   [MJ1103/1104]
CE00    Communication error between finisher and punch unit: Communication error between finisher controller PC board and punch controller PC board [MJ-1103/1104 (when MJ-6102 is installed)]
CE10    Image quality sensor abnormality (OFF level): The output value of this sensor is out of a specified range when sensor light source is OFF  (www.copyir.com)  
CE20    Image quality sensor abnormality (no pattern level): The output value of this sensor is out of a specified range when the image quality control test pattern is not formed  (www.copyir.com)  
CE40    Image quality control test pattern abnormality: The test pattern is not formed normally  (www.copyir.com)  
CE41    Image quality TRC control test pattern abnormality: The image quality TRC control test pattern is not printed normally  (www.copyir.com)  
CE42    Image quality TRC control test pattern abnormality (EFI printer board): Image quality TRC control test pattern is not printed normally  (www.copyir.com)  
CE50    Temperature/humidity sensor abnormality: The output value of this sensor is out of a specified range  (www.copyir.com)  
CE60    Drum thermistor-Y abnormality: The output value of the drum thermistor-Y is out of a specified range  (www.copyir.com)  
CE71    Drum phase adjustment abnormality: Drum phase sensors (Color drum phase sensor and K drum phase sensor) are not turned ON after the drum motor was rotated for a specified period of time  (www.copyir.com)  
CE90    Drum thermistor-K abnormality: The output value of the drum thermistor-K is out of a specified range  (www.copyir.com)  
CEC0    2nd transfer roller position detection abnormality: The 2nd transfer roller does not contact/release normally  (www.copyir.com)  
CF10    Communication module SRAM reading failure  (www.copyir.com)  
CF90    Laser optical unit shutter abnormality  (www.copyir.com)  
CFA0    Media sensor output abnormality before paper reaching: The sensor output value before paper is reached to the media sensor is not normal  (www.copyir.com)  
CFA1    Media sensor output abnormality during paper passing: The sensor output value while paper is being passed is not normal  (www.copyir.com)  
E010    Jam not reaching the fuser transport sensor The paper which has passed through the fuser unit does not reach the fuser transport sensor  (www.copyir.com)  
E011    Transfer belt paper-clinging jam: The paper after the 2nd transfer is clinging to the transfer belt, or a paper jam occurred between the registration roller and the paper clinging detection sensor  (www.copyir.com)  
E020    Stop jam at the fuser transport sensor: The trailing edge of the paper does not pass the fuser transport sensor after its leading edge has reached this sensor  (www.copyir.com)  
E030    Power-ON jam: The paper is remaining on the paper transport path when power is turned ON  (www.copyir.com)  
E061    Incorrect paper size setting for 1st drawer: The size of paper in the 1st drawer differs from size setting of the equipment  (www.copyir.com)  
E062    Incorrect paper size setting for 2nd drawer: The size of paper in the 2nd drawer differs from size setting of the equipment  (www.copyir.com)  
E063    Incorrect paper size setting for 3rd drawer: The size of paper in the 3rd drawer differs from size setting of the equipment  (www.copyir.com)  
E064    Incorrect paper size setting for 4th drawer: The size of paper in the 4th drawer differs from size setting of the equipment  (www.copyir.com)  
E065    Incorrect paper size setting for bypass tray: The size of paper in the bypass tray differs from size setting of the equipment  (www.copyir.com)  
E071    1st drawer media type mis-setting jam: The media type setting of the 1st drawer is incorrect  (www.copyir.com)  
E072    2nd drawer media type mis-setting jam: The media type setting of the 2nd drawer is incorrect  (www.copyir.com)  
E073    3rd drawer media type mis-setting jam: The media type setting of the 3rd drawer is incorrect  (www.copyir.com)  
E074    4th drawer media type mis-setting jam: The media type setting of the 4th drawer is incorrect  (www.copyir.com)  
E075    Option LCF media type mis-setting jam: The media type setting of the option LCF is incorrect  (www.copyir.com)  
E076    Tandem LCF media type mis-setting jam: The media type setting of the tandem LCF is incorrect  (www.copyir.com)  
E090    Image data delay jam: Image data to be printed cannot be prepared  (www.copyir.com)  
E091    Motor-ON time-out jam: The equipment does not operate normally because abnormality occurred on an interface between the SYS board and engine firmware  (www.copyir.com)  
E0A0    Image transport ready time-out jam: Image data to be printed cannot be sent  (www.copyir.com)  
E110    ADU misfeeding (Paper not reaching the registration sensor): The paper which has passed through ADU does not reach the registration sensor during duplex printing  (www.copyir.com)  
E120    Bypass misfeeding (Paper not reaching the bypass feed sensor): Paper fed from the bypass tray does not reach the bypass feed sensor  (www.copyir.com)  
E130    1st drawer misfeeding (Paper not reaching the 1st drawer feed sensor): The paper fed from the 1st drawer does not reach the 1st drawer feed sensor  (www.copyir.com)  
E140    2nd drawer misfeeding (Paper not reaching the 2nd drawer feed sensor): The paper fed from the 2nd drawer does not reach the 2nd drawer feed sensor  (www.copyir.com)  
E150    3rd drawer misfeeding (Paper not reaching the 3rd drawer feed sensor): The paper fed from the 3rd drawer does not reach the 3rd drawer feed sensor
E160    4th drawer misfeeding (Paper not reaching the 4th drawer feed sensor): The paper fed from the 4th drawer does not reach the 4th drawer feed sensor  (www.copyir.com)  
E180    Option LCF misfeeding (Paper not reaching the LCF feed sensor): Paper fed from the LCF does not reach the LCF feed sensor  (www.copyir.com)  
E190    LCF misfeeding (Paper not reaching the LCF feed sensor): The paper fed from the LCF does not reach the LCF feed sensor  (www.copyir.com)  
E200    1st drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor  (www.copyir.com)  
E210    2nd drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor  (www.copyir.com)  
E220    2nd drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor  (www.copyir.com)  
E230    1st drawer misfeeding (Paper not reaching the 1st drawer transport sensor): Paper fed from the 1st drawer does not reach the 1st drawer transport sensor  (www.copyir.com)  
E240    2nd drawer misfeeding (Paper not reaching the 2nd drawer transport sensor): Paper fed from the 2nd drawer does not reach the 2nd drawer transport sensor  (www.copyir.com)  
E260    Option LCF transport jam (Paper not reaching the registration sensor)
E270    Bypass transport jam (Paper not reaching the registration sensor): Paper fed from the bypass tray and passed through the bypass feed sensor does not reach the registration sensor  (www.copyir.com)  
E290    Option LCF transport jam: Paper fed from the Option LCF does not reach the 1st drawer transport sensor  (www.copyir.com)  
E2B0    Stop jam at the registration sensor (1st drawer)
E2B1    Stop jam at the registration sensor (2nd drawer)
E2B2    Stop jam at the registration sensor (3rd drawer)
E2B3    Stop jam at the registration sensor (4th drawer)
E2B4    Stop jam at the registration sensor (Bypass tray)
E2B5    Stop jam at the registration sensor (LCF)
E2B6    Stop jam at the registration sensor (ADU)
E2B7    Stop jam at the registration sensor (option LCF)
E300    3rd drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor  (www.copyir.com)  
E310    3rd drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor  (www.copyir.com)  
E320    3rd drawer transport jam (Paper not reaching the 2nd drawer feed sensor): The paper does not reach the 2nd drawer feed sensor after it has passed the 3rd drawer feed sensor  (www.copyir.com)  
E330    4th drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor  (www.copyir.com)  
E340    4th drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor  (www.copyir.com)  
E350    4th drawer transport jam (Paper not reaching the 2nd drawer feed sensor): The paper does not reach the 2nd drawer feed sensor after it has passed the 3rd drawer feed sensor  (www.copyir.com)  
E360    4th drawer transport jam (Paper not reaching the 3rd drawer feed sensor): The paper does not reach the 3rd drawer feed sensor after it has passed the 4th drawer feed sensor  (www.copyir.com)  
E370    3rd drawer misfeeding (Paper not reaching the 3rd drawer transport sensor): Paper fed from the 3rd drawer does not reach the 3rd drawer transport sensor  (www.copyir.com)  
E380    4th drawer misfeeding (Paper not reaching the 4th drawer transport sensor): Paper fed from the 4th drawer does not reach the 4th drawer transport sensor  (www.copyir.com)  
E3C0    LCF transport jam (Paper not reaching the registration sensor): Paper fed from the LCF and passed through the 1st drawer feed sensor does not reach the registration sensor  (www.copyir.com)  
E3D0    LCF transport jam (Paper not reaching the 1st drawer feed sensor): Paper fed from the LCF and passed through the 2nd drawer feed sensor does not reach the 1st drawer feed sensor  (www.copyir.com)  
E3E0    LCF transport jam (Paper not reaching the 2nd drawer feed sensor): Paper fed from the LCF and passed through the LCF feed sensor does not reach the 2nd drawer feed sensor  (www.copyir.com)  
E3F0    Tandem LCF misfeeding (Paper not reaching the tandem LCF feed sensor): Paper fed from the Tandem LCF does not reach the tandem LCF transport sensor  (www.copyir.com)  
E400    Duplexing unit open jam
E430    ADU open jam: The ADU has opened during printing  (www.copyir.com)  
E440    Paper feed cover open jam: The paper feed cover has opened during printing  (www.copyir.com)  
E450    LCF side cover open jam: The LCF side cover has opened during printing  (www.copyir.com)  
E480    Bridge unit open jam: The bridge unit has opened during printing  (www.copyir.com)  
E4A0    Waste toner cover open jam (printing)
E4B0    Bridge unit open jam (printing): The bridge unit has opened during printing  (www.copyir.com)  
E510    Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section  (www.copyir.com)  
E511    ADU misfeeding (Paper not reaching the ADU transport sensor-1)
E540    ADU misfeeding (Paper not reaching the ADU feed sensor): Paper does not reach the duplexing unit path exit sensor after it has passed the duplexing unit path entrance sensor  (www.copyir.com)  
E550    Paper remaining jam on the transport path: The paper is remaining on the transport path when printing is finished (caused by a multiple paper feeding)  (www.copyir.com)  
E570    Jam not reaching the bridge unit  (www.copyir.com)  
E580    Stop jam at the bridge unit
E590    Jam not reaching the upper paper exit sensor
E5A0    Stop jam at the upper paper exit sensor
E712    Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor  (www.copyir.com)  
E714    Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray  (www.copyir.com)  
E721    Jam not reaching the original reading start sensor: The original does not reach the reading start sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side)  (www.copyir.com)  
E722    Jam not reaching the original exit sensor (during scanning): The original which passed the read sensor does not reach the original exit/reverse sensor when it is transported from the scanning section to exit section  (www.copyir.com)  
E724    Stop jam at the original registration sensor: The trailing edge of the original does not pass the original registration sensor after its leading edge has reached this sensor  (www.copyir.com)  
E725    Stop jam at the reading start sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor  (www.copyir.com)  
E726    Transport/exit signal reception jam during ADF standby status
E727    Jam not reaching the original reading end sensor
E729    Stop jam at the original reading end sensor
E731    Stop jam at the original exit/reverse sensor: The trailing edge of the original does not pass the original exit/reverse sensor after its leading edge has reached this sensor  (www.copyir.com)  
E744    Stop jam at the exit/reverse sensor
E745    Jam not reaching the exit reverse sensor
E746    Exit/reverse sensor paper remaining jam
E762    Registration sensor paper remaining jam
E770    Original width detection sensor-1 paper remaining jam
E771    Original width detection sensor-2 paper remaining jam
E772    Original width detection sensor-3 paper remaining jam
E773    Intermediate transport sensor paper remaining jam
E774    Reading start sensor paper remaining jam
E775    Reading end sensor paper remaining jam
E777    Exit sensor paper remaining jam
E860    Original jam access cover open: The Original jam access cover has opened during RADF operation  (www.copyir.com)  
E870    RADF open jam: RADF has opened during RADF operation  (www.copyir.com)  
E871    Cover open jam in the read ready status: Jam caused by opening of the Original jam access cover or front cover while the RADF is waiting for the scanning start signal from the equipment  (www.copyir.com)  
E910    Jam at the bridge unit transport sensor 1: The paper does not reach the bridge unit transport sensor 1 after it has passed the exit sensor  (www.copyir.com)  
E920    Stop jam at the bridge unit transport sensor 1: The trailing edge of the paper does not pass the bridge unit transport sensor 1 after its leading edge has reached the sensor  (www.copyir.com)  
E930    Jam at the bridge unit transport sensor 2: The trailing edge of the paper does not reach the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 1  (www.copyir.com)  
E940    Stop jam at the bridge unit transport sensor 2: The trailing edge of the paper does not pass the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 2  (www.copyir.com)  
E970    Jam not reaching the lower paper exit sensor: Paper transported from the bridge unit does not reach the lower paper exit sensor  (www.copyir.com)  
E980    Stop jam at the lower paper exit sensor: Paper transported from the bridge unit does not pass the lower paper exit sensor  (www.copyir.com)  
E9F0    Punching jam: Punching is not performed properly  (www.copyir.com)   [MJ-1103/1104 (when MJ-6102 is installed)]
EA10    Paper transport delay jam: The paper which has passed the relay transport path does not reach the inlet sensor  (www.copyir.com)   [MJ-1103/1104]
EA20    Paper transport delay jam: The paper which has passed through the inlet sensor does not reach the transport sensor  (www.copyir.com)   [MJ1103/1104]
EA21    Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec  (www.copyir.com)   [MJ-1103/1104]
EA22    Paper transport jam (Finisher paper punching edge detection sensor): [MJ-1103/1104]
EA23    Paper transport jam (exit sensor): [MJ-1103/1104]
EA24    Paper transport jam (between entrance and exit sensors): [MJ-1103/1104]
EA25    Paper transport jam (after paper stack exit): [MJ1103/1104]
EA26    Paper transport jam (stop command request): [MJ1103/1104]
EA27    Paper transport jam (paper not inserted): [MJ-1103/ 1104]
EA28    Paper transport jam (assisting arm operation delay): [MJ-1103/1104]
EA29    Paper transport jam (stack transport delay): [MJ1103/1104]
EA31    Transport path paper remaining jam: The paper which has passed through the inlet sensor does not reach the transport sensor  (www.copyir.com)   [MJ-1103/1104]
EA32    Exit paper remaining jam: The paper is remaining on the finishing tray when the power is turned ON  (www.copyir.com)   [MJ-1103/1104]
EA40    Door open jam: The upper/front cover of the finisher section or the upper/ front door of the puncher section has opened during printing  (www.copyir.com)   [MJ-1103/1104] Cover open error: The front cover or stationary tray cover is opened during paper transport  (www.copyir.com)   [MJ-1103/1104]
EA50    Stapling jam: Stapling is not performed properly  (www.copyir.com)   [MJ-1103/1104]
EA60    Early arrival jam: The inlet sensor detects the paper earlier than a specified timing  (www.copyir.com)   [MJ-1103/1104]
EA70    Stack exit belt home position error: The stack exit belt is not at the home position  (www.copyir.com)   [MJ-1103/1104]
EA90    Door open jam: The delivery cover or inlet cover has opened during printing [MJ-1103/1104]  (www.copyir.com)  
EAA0    Power-ON jam: Paper exists at No  (www.copyir.com)  1 paper sensor, No  (www.copyir.com)   2 paper sensor, No  (www.copyir.com)  3 paper sensor, vertical path paper sensor or delivery sensor when power is turned ON  (www.copyir.com)   [MJ-1103/1104]
EAB0    Transport stop jam: The paper which passed through the inlet sensor does not reach or pass No  (www.copyir.com)  1 paper sensor, No  (www.copyir.com)   2 paper sensor, No  (www.copyir.com)  3 paper sensor or delivery sensor  (www.copyir.com)   [MJ-1103/1104]
EAB1    Short paper jam (Saddle Stitch Finisher)
EAD0    Print end command time-out jam: The printing has not finished normally because of the communication error between the SYS board and LGC board at the end of printing  (www.copyir.com)  
EAE0    Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher  (www.copyir.com)  
EB30    Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing  (www.copyir.com)  
EB50    Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper  (www.copyir.com)  
EB60    Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at [EB50])  (www.copyir.com)  
ED10    Skew adjustment motor (M1) home position detection abnormality: The Skew adjustment motor is not at the home position  (www.copyir.com)   [MJ-1103/1104 (when MJ-6102 is installed)]
ED11    Sideways adjustment motor (M2) home position detection error: The Sideways adjustment motor is not at the home position  (www.copyir.com)   [MJ-1103/1104 (when MJ6102 is installed)]
ED12    Shutter home position error: The shutter is not at the home position  (www.copyir.com)   [MJ-1103/1104]
ED13    Front alignment plate home position error: The front alignment plate is not at the home position  (www.copyir.com)   [MJ1103/1104]
ED14    Rear alignment plate home position error: The rear alignment plate is not at the home position  (www.copyir.com)   [MJ1103/1104]
ED15    Paddle home position error: The paddle is not at the home position  (www.copyir.com)   [MJ-1103/1104]
ED16    Buffer tray home position error: The buffer tray is not at the home position  (www.copyir.com)   [MJ-1103/1104]
EF10    Paper not supported for Saddle Stitch Finisher
EF11    Saddle Stitch Finisher stapling error (front)
EF12    Saddle Stitch Finisher stapling error (rear)
EF13    Saddle paper holder home position detection abnormality
EF14    Saddle paper exit jam
EF15    Saddle Stitch Finisher side alignment motor home position detection abnormality
EF16    Saddle Stitch Finisher stacker motor home position detection abnormality
EF17    Saddle Stitch Finisher folding blade home position detection abnormality
EF18    Saddle Stitch Finisher additional folding roller home position detection abnormality
EF19    Saddle paper folding jam
EF20    Saddle stacker jam
EF21    Hole Punch Unit paper leading edge skew detection abnormality
EF22    Hole Punch Unit paper leading edge detection abnormality
EF23    Hole Punch Unit paper alignment abnormality
EF24    Hole Punch Unit paper trailing edge skew detection abnormality
EF25    Hole Punch Unit paper trailing edge detection abnormality
EF27    Hole Punch Unit paper edge detection order abnormality-1
EF28    Hole Punch Unit paper edge detection order abnormality-2
F070    Communication error between System-CPU and Engine-CPU
F090    SRAM abnormality on the SYS board
F100    HDD format error: HDD cannot be initialized normally  (www.copyir.com)  
F101    HDD unmounted: Connection of HDD cannot be detected  (www.copyir.com)  
F102    HDD start error: HDD cannot become ‘Ready’ state
F103    HDD transfer time-out: Reading/writing cannot be performed in the specified period of time  (www.copyir.com)  
F104    HDD data error: Abnormality is detected in the data of HDD  (www.copyir.com)  
F105    HDD other error
F106    Point and Print partition damage
F107    /BOX partition damage
F108    /SHA partition damage
F110    Communication error between System-CPU and Scanner-CPU
F111    Scanner response abnormality
F120    Database abnormality: Database is not operating normally  (www.copyir.com)  
F130    Invalid MAC address
F200    Data Overwrite option (GP-1070) disabled
F350    SLG board abnormality
F400    SYS board cooling fan abnormality

 

 

Copyright MAXXmarketing Webdesigner GmbH
Google Analytics Alternative