لمینت MKP
4 شهریور, 1402
Menu
C010 Main motor abnormality: The main motor is not rotating normally copyir.com
C260 Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON copyir.com
C270 Carriage home position cannot be detected within a specified period of time: The carriage does not shift from its home position in a specified period of time copyir.com
C411 Thermistor or heater lamp abnormality at power-ON: Abnormality of the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON copyir.com
C412 Thermistor/heater lamp abnormality at power-ON: Thermistor abnormality is detected at power-ON or the fuser roller temperature does not rise within a specified period of time after power-ON copyir.com
C413 Thermistor abnormality during warming up or in ready status after abnormality judgment copyir.com
C414 Temperature of the fuser roller did not reach to “temperature for ready condition” at specified period of time during warming-up copyir.com
C415 No recovery even after one minute elapses after low temperature WAIT state is entered during a printing operation copyir.com
C447 While in the READY state, one of the thermistors detected the specified temperature or higher copyir.com
C449 High temperature detection error
C452 In the READY state, temperature differential error between the center thermistor and a side thermistor
C4B0 Fixer counter data error
C911 Toner IC chip access circuit board error
C940 Engine-CPU abnormality
C950 Error for distinction between engine firmware and MAIN board
C970 High-voltage transformer abnormality: Leakage of the main charger is detected copyir.com
CA10 Polygonal motor abnormality: The polygonal motor is not rotating normally copyir.com
CA20 H-Sync detection error: H-Sync detection PC board cannot detect laser beams copyir.com
CE50 Temperature/humidity sensor abnormality: The output value of this sensor is out of a specified range copyir.com
CE90 Drum thermistor abnormality: The output value of the drum thermistor-K is out of a specified range copyir.com
F070 Communication error between System-CPU and Engine- CPU
F090 Memory abnormality on the MAIN board copyir.com
F901 Engine speed error: The speed information of the MAIN board is damaged copyir.com
اشتراک گذاری در:
در خبرنامه ما عضو شوید
تمامی حقوق این سایت متعلق به کپی ایران بوده و هر گونه بهرهبرداری از آن مستلزم کسب اجازه میباشد.