توشیبا استودیو Toshiba e-Studio 306S

ایرادات دستگاههای توشیبا براساس کد می باشد. شرکت کپی ایران در نظر دارد تمامی سرویس مانوئلها و رفع ایرادات را در اختیار شما عزیزان قرار دهد.

 

 

 

C010    Drive system related service call
Main motor abnormality: The main motor is not rotating normally  copyir.com
C040    PFP motor abnormality: The PFP motor is not rotating normally  copyir.com
C130    Upper drawer tray abnormality: The upper drawer tray motor is not rotating or the upper drawer tray is not moving normally  copyir.com
C140    Lower drawer tray abnormality: The lower drawer tray motor is not rotating or the lower drawer tray is not moving normally  copyir.com
C150    PFP upper drawer tray abnormality: The PFP upper drawer tray motor is not rotating or the PFP upper drawer tray is not moving normally  copyir.com
C160    PFP lower drawer tray abnormality: The PFP lower drawer tray motor is not rotating or the PFP lower drawer tray is not moving normally  copyir.com
C180    LCF tray-up motor abnormality: The LCF tray-up motor is not rotating or the LCF tray is not moving normally  copyir.com
C1A0    LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally  copyir.com
C1B0    LCF transport motor abnormality: The LCF transport motor is not rotating normally  copyir.com
C260    Peak detection error: Lighting of the exposure lamp (white referenceکپی ایران is not detected when power is turned ON  copyir.com
C270    Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time  copyir.com
C280    Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time  copyir.com
C410    Thermistor or heater abnormality at power-ON: Abnormality of service call the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON  copyir.com
C440    Heater abnormality after abnormality judgment: The temperature of the fuser roller has exceeded the range of control (in this case, the main switch turns OFF automaticallyکپی ایران or does not even reach the range  copyir.com
C450    Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing  copyir.com
C550, C780    RADF I/F error: Communication error has occurred between the RADF and the scanner  copyir.com
C570    Communication error between Engine-CPU and IPC board
C580    Communication error between IPC board and finisher
C730    EEPROM initialization error: EEPROM is not initialized normally when performing the code 05-356  copyir.com
C810    Fan motor abnormality: The fan motor is not rotating normally  copyir.com
C820    Read sensor adjustment error: The read sensor cannot be adjusted normally when performing the code 05-356
C830    Original length sensor adjustment error: The original length sensor cannot be adjusted normally when performing the code 05-356  copyir.com
C940    Circuit related service call
Engine-CPU abnormality
C970    Process related service call
High-voltage transformer abnormality: Leakage of the main charger is detected  copyir.com
CA10    Polygonal motor abnormality: The polygonal motor is not rotating normally  copyir.com
CA20    H-Sync detection error: H-Sync detection PC board cannot detect laser beams  copyir.com
CB10    Transport motor abnormality: The transport motor or stack transport roller is not rotating normally  copyir.com [MJ-1025]
CB20    Delivery motor abnormality: Delivery motor or delivery roller is not rotating normally  copyir.com [MJ-1022/1025]
CB30    Tray lift motor abnormality: The tray lift motor is not rotating normally or the delivery tray is not moving normally  copyir.com [MJ-1025]
CB50    Staple motor (staple/foldکپی ایران abnormality: The staple motor is not rotating normally or the stapler is not moving normally  copyir.com [MJ-1025]
CB60    Stapler unit shift motor abnormality: The stapler unit shift motor is not rotating normally or the Stapler Unit is not moving normally  copyir.com [MJ-1025]
CB80    Backup RAM data abnormality:
1کپی ایران Abnormality of checksum value on finisher controller board is detected when the power is turned on  copyir.com [MJ-1025]
2کپی ایران Abnormality of checksum value on punch controller board is detected when the power is turned on  copyir.com [MJ-1025 (when MJ-6005 is installedکپی ایران]
CC30    Stack processing motor abnormality: The stack processing motor is not rotating normally or the stack delivery belt is not moving normally  copyir.com [MJ-1022] Paddle motor abnormality: The paddle motor is not rotating normally or the swing guide is not moving normally  copyir.com [MJ-1025]
CC50    Horizontal registration motor abnormality: The horizontal registration motor is not rotating normally or the puncher is not moving normally  copyir.com [MJ-1025 (when MJ-6005 is installedکپی ایران]
CC60    Punch motor abnormality: The punch motor is not rotating normally or the puncher is not moving normally  copyir.com [MJ-1025 (when MJ-6005 is installedکپی ایران]
CC80    Front jogging motor abnormality: Front jogging motor is not rotating normally or the front alignment plate is not moving normally  copyir.com [MJ-1022] Alignment motor (frontکپی ایران abnormality: The alignment motor (frontکپی ایران is not rotating normally or the front alignment plate is not moving normally  copyir.com [MJ-1025]
CC90    Upper stack tray lift motor abnormality: The upper stack tray lift motor is not rotating or the upper stack tray is not moving normally  copyir.com [MJ-1022]
CCA0    Lower stack tray lift motor abnormality: The lower stack tray lift motor is not rotating or the lower stack tray is not moving normally  copyir.com [MJ-1022]
CCB0    Rear jogging motor abnormality: Rear jogging motor is not rotating normally or the rear alignment plate is not moving normally  copyir.com [MJ-1022] Alignment motor (rearکپی ایران abnormality: The alignment motor (rearکپی ایران is not rotating normally or the rear alignment plate is not moving normally  copyir.com [MJ-1025]
CDC0    Punch power failure abnormality: 24 V is not applied to the punch controller board  copyir.com [MJ-1025 (when MJ-6005 is installedکپی ایران]
CDD0    Folding position sensor abnormality: Automatic adjustment of the folding position sensor can not be performed properly  copyir.com [MJ-1025]
CDE0    Paddle motor abnormality: The paddle motor does not rotate properly  copyir.com [MJ-1025]
CDF0    Initialization error of the offset tray: The home position of the separator cannot be detected when the power is turned ON  copyir.com
CE00    Communication error between finisher unit and puncher unit: Communication error between the finisher controller PC board and punch controller PC board  copyir.com [MJ-1025 (when MJ-6005 is installedکپی ایران]
CF60    Toner for recycle transport area lock
E010    Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor  copyir.com
E020    Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor  copyir.com
E030    Power-ON jam: The paper is remaining on the paper transport path when power is turned ON  copyir.com
E090    HDD abnormality causes jam: Image data to be printed cannot be prepared  copyir.com
E110    ADU misfeeding (Paper not reaching the 1st transport sensorکپی ایران: The paper which has passed through ADU does not reach the 1st transport sensor during duplex printing  copyir.com
E120    Bypass misfeeding (Paper not reaching the 1st transport sensorکپی ایران: The paper fed from the bypass tray does not reach the 1st transport sensor  copyir.com
E130    Upper drawer misfeeding (Paper not reaching the 1st transport sensorکپی ایران: The paper fed from the upper drawer does not reach the 1st transport sensor  copyir.com
E140    Lower drawer misfeeding (Paper not reaching the 2nd transport sensorکپی ایران: The paper fed from the lower drawer does not reach the 2nd transport sensor  copyir.com
E150    PFP upper drawer misfeeding (Paper not reaching the PFP upper drawer feed sensorکپی ایران: The paper fed from the PFP upper drawer does not reach the PFP upper drawer feed sensor
E160    PFP lower drawer misfeeding (Paper not reaching the PFP lower drawer feed sensorکپی ایران: The paper fed from the PFP lower drawer does not reach the PFP lower drawer feed sensor  copyir.com
E190    LCF misfeeding (Paper not reaching the LCF feed sensorکپی ایران: The paper fed from the LCF does not reach the LCF feed sensor
E200    Upper drawer transport jam (Paper not reaching the registration sensorکپی ایران: The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
E210    Lower drawer transport jam (Paper not reaching the registration sensorکپی ایران: The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
E220    Lower drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران: The paper does not reach the 1st transport sensor after it has passed the lower drawer feed sensor  copyir.com
E270    Bypass transport jam (paper not reaching the registration sensorکپی ایران: The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
E280    ADU transport jam (paper not reaching the registration sensorکپی ایران: The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing  copyir.com
E300    PFP upper drawer transport jam (Paper not reaching the registration sensorکپی ایران: The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
E310    PFP upper drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران: The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor  copyir.com
E320    PFP upper drawer transport jam (Paper not reaching the 2nd transport sensorکپی ایران: The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor  copyir.com
E330    PFP lower drawer transport jam (Paper not reaching the registration sensorکپی ایران: The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
E340    PFP lower drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران: The paper does not reach the 1st transport sensor after it has passed the PFP lower drawer feed sensor  copyir.com
E350    PFP lower drawer transport jam (Paper not reaching the 2nd transport sensorکپی ایران: The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor  copyir.com
E360    PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensorکپی ایران: The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor  copyir.com
E3C0    LCF transport jam (Paper not reaching the registration sensorکپی ایران: The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
E3D0    LCF transport jam (Paper not reaching the 1st transport sensorکپی ایران: The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor  copyir.com
E3E0    LCF transport jam (Paper not reaching the 2nd transport sensorکپی ایران: The paper does not reach the 2nd transport sensor after it has passed the LCF feed sensor
E400    Transfer cover open jam: The transfer cover has opened during printing  copyir.com
E410    Front cover open jam: The front cover has opened during printing  copyir.com
E420    PFP side cover open jam: The PFP side cover has opened during printing  copyir.com
E430    ADU open jam: The ADU has opened during printing  copyir.com
E440    Side cover open jam: The side cover has opened during printing  copyir.com
E450    LCF side cover open jam: The LCF side cover has opened during printing  copyir.com
E480    Bridge unit open jam: The bridge unit has opened during printing  copyir.com
E490    Job separator cover open jam: The job separator cover has opened during printing  copyir.com
E491    Offset tray cover open jam: The offset tray cover has opened during printing  copyir.com
E510    Stop jam in the ADU: The paper does not reach the ADU exit sensor after it has passed the ADU entrance sensor  copyir.com
E520    Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section  copyir.com
E550    Paper remaining jam on the transport path: The paper is remaining on the transport path when printing is finished (caused by a multiple paper feedingکپی ایران  copyir.com
E711    Jam not reaching the original length sensor: The original fed from the original feeding tray does not reach the original length sensor  copyir.com
E712    Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor  copyir.com
E713    Stop jam at the original length sensor: The trailing edge of the original does not pass the original length sensor after its leading edge has reached this sensor  copyir.com
E714    Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray  copyir.com
E721    Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse sideکپی ایران or the reverse sensor (when scanning reverse sideکپی ایران  copyir.com
E722    Jam not reaching the exit sensor (during scanningکپی ایران: The original which passed the read sensor does not reach the exit sensor when it is transported from the scanning section to exit section  copyir.com
E723    Jam not reaching the reverse sensor (during scanningکپی ایران: The original which passed the read sensor does not reach the reverse sensor when it is transported from the scanning section to reverse section  copyir.com
E724    Stop jam at the registration sensor: The trailing edge of the original does not pass the registration sensor after its leading edge has reached this sensor  copyir.com
E725    Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor  copyir.com
E726    Transport/exit signal reception jam: RADF receives the transport/exit reception signal from the equipment when no original is at the exposure waiting position  copyir.com
E731    Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its leading edge has reached this sensor  copyir.com
E741    Stop jam at the reverse sensor: The trailing edge of the original does not pass the reversal sensor after its leading edge has reached this sensor  copyir.com
E742    Jam not reaching the reverse sensor (during reverse feedingکپی ایران: The leading edge of the original does not reach the reverse sensor when original is fed from the reverse section  copyir.com
E743    Jam not reaching the exit sensor (during reverse feedingکپی ایران: The original does not reach the exit sensor after it has passed the reverse sensor when the original is exited from the reverse section  copyir.com
E860    RADF jam access cover open: The RADF jam access cover has opened during RADF operation  copyir.com
E870    RADF open jam: RADF has opened during RADF operation  copyir.com
E910    Jam at the bridge unit transport sensor-1: The paper does not reach the bridge unit transport sensor- 1 after it has passed the exit sensor  copyir.com
E920    Stop jam at the bridge unit transport sensor-1: The trailing edge of the paper does not pass the bridge unit transport sensor-1 after its leading edge has reached the sensor  copyir.com
E930    Jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-1  copyir.com
E940    Stop jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-2  copyir.com
E950    Jam not reaching the job separator transport sensor: The paper has passed through the exit sensor does not reach the job separator transport sensor  copyir.com
E951    Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor  copyir.com
E960    Jam not reaching the offset tray transport sensor: The paper has passed through the exit sensor does not reach the offset tray transport sensor  copyir.com
E961    Stop jam at the offset tray transport sensor: The trailing edge of the paper does not pass the offset tray transport sensor  copyir.com
E9F0    Finisher jam (Puncher unitکپی ایران
Punching jam: Punching is not performed properly  copyir.com [MJ-1025 (When MJ-6005 is installedکپی ایران]
EA10    Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor  copyir.com [MJ-1022/1025]
EA20    Paper transport stop jam: The paper does not pass through the inlet sensor  copyir.com [MJ-1022/1025]
EA30    Power-ON jam: Paper exists at the inlet sensor when power is turned ON  copyir.com [MJ-1022/1025]
EA40    Door open jam: The finisher has been released from the equipment during printing  copyir.com [MJ-1022/1025]
EA50    Stapling jam: Stapling is not performed properly  copyir.com [MJ-1022/1025]
EA60    Early arrival jam: The inlet sensor detects the paper earlier than a specified timing  copyir.com [MJ-1022]
EA70    Stack delivery jam: It cannot deliver the stack of paper on the intermediary process tray to the stack tray  copyir.com [MJ-1022/1025]
EAB0    Saddle paper transport stop jam: The paper which passed through the inlet sensor does not reach or pass through the folding position sensor  copyir.com [MJ-1025]
EAC0    Saddle transport delay jam: The paper which has reached the inlet sensor does not pass through this sensor  copyir.com [MJ-1025]
EAD0    Other paper jam
Print end command time-out jam: The printing has not finished normally because of the communication error between the SYS board and LGC board at the end of printing  copyir.com
EAE0    Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher  copyir.com
EAF0    Stack return jam: It cannot load the paper which passed through the delivery roller on the intermediary process tray  copyir.com [MJ-1022]
EB30    Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing  copyir.com
EB50    Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper  copyir.com
EB60    Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at [EB50]کپی ایران  copyir.com
F070    Communication error between System-CPU and Engine- CPU
F090    SRAM abnormality on the SYS board
F091    NVRAM abnormality on the SYS board
F092    SRAM and NVRAM abnormality on the SYS board
F100    HDD format error: HDD cannot be initialized normally  copyir.com
F101    HDD unmounted: Connection of HDD cannot be detected  copyir.com
F102    HDD start error: HDD cannot become ‘Ready’ state  copyir.com
F103    HDD transfer time-out: Reading/writing cannot be performed in the specified period of time  copyir.com
F104    HDD data error: Abnormality is detected in the data of HDD  copyir.com
F105    HDD other error
F106    Point and Print partition damage
F107    SHR partition damage
F108    SHA partition damage
F110    Communication error between System-CPU and Scanner- CPU
F111    Scanner response abnormality
F120    Database abnormality: Database is not operating normally  copyir.com
F130    Invaid MAC address
F200    Data overwrite kit (GP-1050/1060کپی ایران is taken off

پست های مرتبط

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

جستجو در مطالب

سوالی دارید؟

برای آگاهی از راه های ارتباط با ما، بر روی دکمه زیر کلیک کنید

مطالب جدید ...

در خبرنامه ما عضو شوید