لمینت MKP
1402-06-04
Menu
C010 Main motor abnormality: The main motor is not rotating normally
C040 PFP motor abnormality: The PFP motor is not rotating normally
C130 Upper drawer tray abnormality: The upper drawer tray motor is not rotating or the upper drawer tray is not moving normally copyir.com
C140 Lower drawer tray abnormality: The lower drawer tray motor is not rotating or the lower drawer tray is not moving normally
C150 PFP upper drawer tray abnormality: The PFP upper drawer tray motor is not rotating or the PFP upper drawer tray is not moving normally
C160 PFP lower drawer tray abnormality: The PFP lower drawer tray motor is not rotating or the PFP lower drawer tray is not moving normal
C180 LCF tray-up motor abnormality: The LCF tray-up motor is not rotating or the LCF tray is not moving normally copyir.com
C1A0 LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally copyir.com
C1B0 LCF transport motor abnormality: The LCF transport motor is not rotating normally copyir.com
C260 Peak detection error: Lighting of the exposure lamp (white referenceکپی ایران is not detected when power is turned ON copyir.com
C270 Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time copyir.com
C280 Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time copyir.com
C290 Scanner fuse blowout: 24V power for the scanning system is not supplied at the scanner warming-up after power-ON copyir.com
C3D0 EPU board memory overwriting error: The overwriting of the EPU board memory fails copyir.com
C3D1 EPU board memory new parts detection error: The EPU board detects the process unit as a new unit when the equipment is started in the normal mode copyir.com
C3D2 EPU board memory old parts detection error: The EPU board cannot detect the new process unit when the equipment is started in the EPU replacement mode ([7] + [START]کپی ایران copyir.com
C410 Thermistor or heater abnormality at power-ON: Abnormality of service call the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON copyir.com
C430 Thermistor abnormality after abnormality judgment: Abnormality of the thermistor is detected after a specified period of time has passed from power-ON (including ready stateکپی ایران copyir.com
C440 Heater abnormality after abnormality judgment: The temperature of the fuser roller has exceeded the range of control or does not even reach the range copyir.com
C450 Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing copyir.com
C4C0 Fuser unit new/old detection fuse abnormality
C550 RADF I/F error: Communication error has occurred between the RADF and the scanner copyir.com
C551 Document feeder model detection error: An optional document feeder that is not compatible to this equipment is installed copyir.com
C570 Communication error between Engine-CPU and IPC board
C580 Communication error between IPC board and finisher
C5A0 EEPROM communication abnormality (LGC boardکپی ایران
C8E0 ADF communication abnormality: The system has to be stopped because the control abnormality occurred
C940 Engine-CPU abnormality
C970 High-voltage transformer abnormality: Leakage of the main charger is detected copyir.com
CA10 Polygonal motor abnormality: The polygonal motor is not rotating normally copyir.com
CA20 H-Sync detection error: H-Sync detection PC board cannot detect laser beams copyir.com
CB00 Finisher not connected
CB01 Finisher communication error
CB10 Entrance motor abnormality: The entrance motor is not rotating normally copyir.com [MJ-1101/MJ-1106]
CB11 Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally copyir.com [MJ-1101/MJ-1106]
CB12 Buffer roller drive motor abnormality: The buffer roller drive motor is not rotating or the buffer roller is not moving normally copyir.com [MJ-1101/MJ-1106]
CB13 Finisher exit motor abnormality [MJ-1101/MJ-1106]
CB14 Paper holding arm motor abnormality [MJ-1101/MJ-1106]
CB30 Movable tray shift motor abnormality: The movable tray shift motor is not rotating or the movable tray is not moving normally copyir.com [MJ-1101] Movable tray shift motor abnormality: The movable tray shift motor or the movable tray does not work properly copyir.com [MJ-1032] Movable tray shift motor abnormality: The movable tray shift motor or the movable tray does not work properly copyir.com [MJ-1033]
CB31 Movable tray paper-full detection error: The actuator of the movable tray paper-full detection sensor does not move smoothly copyir.com [MJ-1101/MJ-1106]
CB40 Front alignment motor abnormality: The front alignment motor is not rotating or the front align/1106ment plate is not moving normally copyir.com [MJ-1101] Front alignment plate home position detection error: The detection of the home position ends abnormally because the front alignment plate has not worked properly copyir.com [MJ-1032/MJ-1033]
CB50 Stapler home position error: The stapler home position sensor does not work copyir.com [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally copyir.com [MJ-1032/MJ-1033
CB51 Stapler shift home position error: The stapler is not at the home position copyir.com [MJ-1101/MJ-1106] Stapler unit sliding home position detection error: The detection of the home position of the stapler unit sliding ends abnormally copyir.com [MJ-1032/MJ-1033]
CB60 Stapler shift motor abnormality: Stapler shift motor is not rotating or staple unit is not moving normally copyir.com [MJ-1101/MJ-1106]
CB80 Backup RAM data abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON copyir.com [MJ-1101/MJ-1106] EEPROM data abnormality: An error occurs during the writing of data into the EEPROM of the Finisher copyir.com [MJ- 1032/MJ-1033]
CB81 Flash ROM abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON copyir.com [MJ-1101/MJ-1106]
CB82 Finisher – Main CPU program error
CB83 Saddle Stitch Finisher – Main CPU program error [MJ- 1106]
CB84 Hole Punch Unit – Main CPU program error
CB90 Paper pushing plate motor abnormality: Paper pushing plate motor is not rotating or paper pushing plate is not moving normally copyir.com
CB91 Saddle Stitch Finisher flash ROM abnormality [MJ-1106]
CB92 Saddle Stitch Finisher RAM abnormality [MJ-1106]
CB93 Additional folding motor abnormality [MJ-1106]
CB94 Saddle transport motor abnormality [MJ-1106]
CB95 Stacker motor abnormality [MJ-1106]
CBA0 Front saddle stapler home position error: The stapler home position detection is abnormally operated and finished copyir.com [MJ-1106]
CBB0 Rear saddle stapler home position error: The stapler home position detection is abnormally operated and finished copyir.com [MJ-1106]
CBC0 Saddle Stitch Finisher side alignment motor (M15کپی ایران abnormality: The alignment motor is not rotating or the alignment plate is not working properly copyir.com [MJ- 1106]
CBE0 Saddle Stitch Finisher folding motor (M17کپی ایران abnormality: The folding motor is not rotating or the folding roller is not moving normally copyir.com [MJ-1106]
CBF0 Stacker motor (M9کپی ایران abnormality : The stacker motor is not rotating copyir.com [MJ-1033]
CC01 A model not supporting the Finisher is connected copyir.com Note that this error is recognized in the communication converter and is output copyir.com
CC02 Stack exit roller nip home position detection error: The detection of the home position of the stack exit roller nip ends abnormally copyir.com [MJ-1032/MJ-1033]
CC20 Saddle communication error [MJ-1106]
CC21 The detection of the home position of the saddle stitch 3rd transport roller drive motor ends abnormally copyir.com
CC22 The detection of the home position of the saddle stitch stapler unit ends abnormally copyir.com
CC30 Stack transport motor abnormality: The stack transport motor is not rotating or the stack transport belt is not moving normally copyir.com [MJ-1101/MJ-1106]
CC31 Transport motor abnormality: The transport motor is not rotating or the stack transport roller -1 and -2 is not rotating normally copyir.com [MJ-1101/MJ-1106]
CC41 Paper holder cam home position abnormality: The paper holder cam is not at the home position copyir.com [MJ- 1101]
CC51 Sideways adjustment motor (M2کپی ایران abnormality: Sideways adjustment motor is not rotating or puncher is not shifting normally copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
CC52 Skew adjustment motor (M1کپی ایران abnormality: Skew adjustment motor is not rotating or puncher is not shifting normally copyir.com [MJ-1101/MJ-1106 (when MJ- 6103 is installedکپی ایران ]
CC53 An abnormality occurs in the punch waste full sensor copyir.com
CC54 Hole punch registration sensor detection error: An abnormality occurs in the hole punch registration sensor copyir.com [MJ-1032/MJ-1033]
CC60 Punch motor abnormality: Punch motor is not rotating or puncher is not shifting normally copyir.com]
CC61 Punch motor (M3کپی ایران home position detection error: Punch motor is not rotating or puncher is not shifting normally copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
CC71 Punch ROM checksum error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
CC72 Punch RAM read/write error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
CC80 Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally copyir.com [MJ-1101/MJ-1106] Rear alignment plate home position detection error: The detection of the home position ends abnormally because the rear alignment plate has not worked properly copyir.com [MJ-1032/MJ-1033]
CC91 The detection of the home position of the gripper arm ends abnormality copyir.com
CC92 The movable tray exceeds its upper limit copyir.com
CC93 Knurled roller shift solenoid abnormality: An abnormality occurs in the knurled roller shift solenoid copyir.com [MJ-1032]
CC94 1st fan motor abnormality: The 1st fan motor is locked abnormally copyir.com [MJ-1032]
CCF1 Tray safety switch abnormality – The tray safety switch turned on during tray operation (moving up or downکپی ایران copyir.com
CDE0 Paddle motor abnormality: The paddle motor does not rotate properly copyir.com
CDF0 Initialization error of the offset tray: The home position of the separator cannot be detected when the power is turned ON copyir.com
CE00 Communication error between finisher unit and puncher unit: Communication error between the finisher controller PC board and punch controller PC board copyir.com
CE50 Temperature/humidity sensor abnormality: The output value of this sensor is out of a specified range copyir.com
CE90 Drum thermistor abnormality: The output value of the drum thermistor-K is out of a specified range copyir.com
CF10 Communication module SRAM reading failure copyir.com [MJ-1101]
E010 Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor copyir.com
E020 Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor copyir.com
E030 Power-ON jam: The paper is remaining on the paper transport path when power is turned ON copyir.com
E061 Incorrect paper size setting for upper drawer: The size of paper in the 1st drawer differs from size setting of the equipment copyir.com
E062 Incorrect paper size setting for lower drawer: The size of paper in the 2nd drawer differs from size setting of the equipment copyir.com
E063 Incorrect paper size setting for PFP upper drawer: The size of paper in the 3rd drawer differs from size setting of the equipment copyir.com
E064 Incorrect paper size setting for PFP lower drawer: The size of paper in the 4th drawer differs from size setting of the equipment copyir.com
E065 Incorrect paper size setting for bypass tray: The size of paper in the bypass tray differs from size setting of the equipment
E090 HDD abnormality causes jam: Image data to be printed cannot be prepared copyir.com
E110 ADU misfeeding (Paper not reaching the registration sensorکپی ایران : The paper which has passed through ADU does not reach the registration sensor during duplex printing
E120 Bypass misfeeding (Paper not reaching the 1st transport sensorکپی ایران : The paper fed from the bypass tray does not reach the 1st transport sensor
E130 Upper drawer misfeeding (Paper not reaching the 1st transport sensorکپی ایران : The paper fed from the upper drawer does not reach the 1st transport sensor copyir.com
E140 Lower drawer misfeeding (Paper not reaching the 2nd transport sensorکپی ایران : The paper fed from the lower drawer does not reach the 2nd transport sensor copyir.com
E150 PFP upper drawer misfeeding (Paper not reaching the PFP upper drawer feed sensorکپی ایران : The paper fed from the PFP upper drawer does not reach the PFP upper drawer feed sensor copyir.com
E160 PFP lower drawer misfeeding (Paper not reaching the PFP lower drawer feed sensorکپی ایران : The paper fed from the PFP lower drawer does not reach the PFP lower drawer feed senso
E190 LCF misfeeding (Paper not reaching the LCF feed sensorکپی ایران : The paper fed from the LCF does not reach the LCF feed sensor copyir.com
E200 Upper drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor
E210 Lower drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor
E220 Lower drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the lower drawer feed sensor copyir.com
E270 Bypass transport jam (paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E280 ADU transport jam (paper not reaching the registration sensorکپی ایران : The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing
E300 PFP upper drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E310 PFP upper drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor copyir.com
E320 PFP upper drawer transport jam (Paper not reaching the 2nd transport sensorکپی ایران : The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor copyir.com
E330 PFP lower drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E340 PFP lower drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the PFP lower drawer feed sensor copyir.com
E350 PFP lower drawer transport jam (Paper not reaching the 2nd transport sensorکپی ایران : The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor copyir.com
E360 PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensorکپی ایران : The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor copyir.com
E3C0 LCF transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E3D0 LCF transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor copyir.com
E3E0 LCF transport jam (Paper not reaching the 2nd transport sensorکپی ایران : The paper does not reach the 2nd transport sensor after it has passed the LCF feed sensor copyir.com
E410 Front cover open jam: The front cover has opened during printing copyir.com
E420 PFP side cover open jam: The PFP side cover has opened during printing copyir.com
E430 ADU open jam: The ADU has opened during printing
E440 Feed cover open jam: The feed cover has opened during printing copyir.com
E450 LCF side cover open jam: The LCF side cover has opened during printing copyir.com
E480 Bridge unit open jam: The bridge unit has opened during printing copyir.com
E490 Job separator cover open jam: The job separator cover has opened during printing copyir.com
E491 Offset tray cover open jam: The offset tray cover has opened during printing copyir.com
E510 Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section copyir.com
E520 Stop jam in the ADU: The paper does not reach the ADU exit sensor after it has passed the ADU entrance sensor copyir.com
E550 Paper remaining jam on the transport path: The paper is remaining on the transport path when printing is finished (caused by a multiple paper feedingکپی ایران copyir.com
E570 Jam not reaching the reverse sensor: The paper which has passed the exit sensor does not reach the reverse sensor
E580 Stop jam at the reverse sensor: The trailing edge of the paper does not pass the reverse sensor after its leading edge has reached this sensor
E712 Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor copyir.com
E714 Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray copyir.com
E721 Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse sideکپی ایران or the reverse sensor (when scanning reverse sideکپی ایران copyir.com
E722 Jam not reaching the exit sensor (during scanningکپی ایران : The original which passed the read sensor does not reach the exit sensor when it is transported from the scanning section to exit section copyir.com
E724 Stop jam at the registration sensor: The trailing edge of the original does not pass the registration sensor after its leading edge has reached this sensor copyir.com
E725 Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor copyir.com
E731 Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its leading edge has reached this sensor copyir.com
E860 RADF jam access cover open: The RADF jam access cover has opened during RADF operation copyir.com
E870 RADF open jam: RADF has opened during RADF operation copyir.com
E871 Cover open jam in the read ready status: Jam caused by opening of the RADF jam access cover or front cover while the RADF is waiting for the scanning start signal from the equipment copyir.com
E910 Jam at the bridge unit transport sensor-1: The paper does not reach the bridge unit transport sensor-1 after it has passed the exit sensor copyir.com
E920 Stop jam at the bridge unit transport sensor-1: The trailing edge of the paper does not pass the bridge unit transport sensor-1 after its leading edge has reached the sensor copyir.com
E930 Jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-1 copyir.com
E940 Stop jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-2 copyir.com
E950 Jam not reaching the job separator transport sensor: The paper has passed through the exit sensor does not reach the job separator transport sensor copyir.com
E951 Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor
E960 Jam not reaching the offset tray transport sensor: The paper has passed through the exit sensor does not reach the offset tray transport sensor copyir.com
E961 Stop jam at the offset tray transport sensor: The trailing edge of the paper does not pass the offset tray transport sensor copyir.com
E9F0 Punching jam: Punching is not performed properly copyir.com [MJ-1025 (When MJ-6005 is installedکپی ایران ] Punching jam: Punching is not performed properly copyir.com [MJ-1024 (when MJ-6004 is installedکپی ایران ] [MJ-1101 (when MJ-6101 is installedکپی ایران ]
EA10 Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor copyir.com Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor copyir.com [MJ-1024/1031/1101]
EA20 Paper transport stop jam: The paper does not pass through the inlet sensor copyir.com [MJ-1025/MJ-1031] Paper transport stop jam: The paper has passed through the inlet sensor but does not reach or pass the feed path sensor or processing tray sensor copyir.com [MJ-1024] Paper transport delay jam: The paper which has passed through the inlet sensor does not reach the transport sensor copyir.com [MJ- 1101
EA21 Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec copyir.com
EA22 Paper transport jam (Finisher paper punching edge detection sensorکپی ایران
EA23 Paper transport jam (exit sensorکپی ایران
EA24 Paper transport jam (between entrance and exit sensorsکپی ایران
EA25 Paper transport jam (after paper stack exitکپی ایران
EA26 Paper transport jam (stop command requestکپی ایران
EA27 Paper transport jam (paper not insertedکپی ایران
EA28 Paper transport jam (assisting arm operation delayکپی ایران
EA29 Paper transport jam (stack transport delayکپی ایران
EA30 Power-ON jam: Paper exists at the inlet sensor when power is turned ON copyir.com
EA31 Transport path paper remaining jam
EA32 Exit paper remaining jam
EA40 Door open jam: The Finisher is released from the equipment or any of the staple door and top cover is opened during printing copyir.com [MJ-1025] Door open jam: Any of the upper cover and front cover of the Finisher or any of the upper door and front door of the Hole Punch Unit is opened during printing copyir.com [MJ-1024] Joint open jam: The joint is released during printing or in the standby status copyir.com [MJ-1031]
EA50 Stapling jam: Stapling is not performed properly copyir.com
EA60 Early arrival jam: The inlet sensor detects the paper earlier than a specified timing
EA70 Stack delivery jam: It cannot deliver the stack of paper on the intermediary process tray to the stack tray copyir.com [MJ-1025] Stack slider home position error: The stack slider is not at the home position copyir.com [MJ-1031]
EA80 Stapling jam: Stapling is not performed properly copyir.com [MJ-1024]
EA90 Door open jam: The delivery cover or inlet cover has opened during printing [MJ-1024/MJ-1101] copyir.com
EAA0 Power-ON jam: Paper exists at No copyir.com1 paper sensor, No copyir.com 2 paper sensor, No copyir.com3 paper sensor, vertical path paper sensor or delivery sensor when power is turned ON copyir.com [MJ-1024/MJ-1101]
EAB0 Saddle paper transport stop jam: The paper which passed through the inlet sensor does not reach or pass through the folding position sensor copyir.com [MJ-1025]
EAC0 Saddle transport delay jam: The paper which has reached the inlet sensor does not pass through this sensor copyir.com [MJ-1025/MJ-1024]
EAD0 Print end command time-out jam: The printing has not finished normally because of the communication error between the SYS board and LGC board at the end of printing copyir.com
EAE0 Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher copyir.com
EB30 Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing copyir.com
EB50 Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper copyir.com
EB60 Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at [EB50]کپی ایران copyir.com
ED10 Skew adjustment motor home position detection abnormality: The Skew adjustment motor is not at the home position copyir.com [MJ-1101 (when MJ-6101 is installedکپی ایران ]
ED11 Sideways adjustment motor home position detection error: The Sideways adjustment motor is not at the home position copyir.com [MJ-1101 (when MJ-6101 is installedکپی ایران ]
ED12 Shutter home position error: The shutter is not at the home position copyir.com [MJ-1101]
ED13 Front alignment plate home position error: The front alignment plate is not at the home position copyir.com [MJ- 1101]
ED14 Rear alignment plate home position error: The rear alignment plate is not at the home position copyir.com [MJ- 1101]
ED15 Paddle home position error: The paddle is not at the home position copyir.com [MJ-1101]
ED16 Buffer tray home position error: The buffer tray is not at the home position copyir.com [MJ-1101]
F070 Communication error between System-CPU and Engine- CPU
F090 SRAM abnormality on the SYS board
F100_0 HDD format error: Operation of HDD key data fails copyir.com
F100_1 HDD format error: Encryption key data of either the SYS board or the SRAM board for the SYS board are damaged copyir.com
F100_2 HDD format error: Encryption key data of both the SYS board and the SRAM board for the SYS board are damaged copyir.com
F101 The HDD cannot be connected (mountedکپی ایران caused by a reason other than one described in the F101_0 through F101_3 errors copyir.com
F101_0 HDD connection error (HDD connection cannot be detected copyir.comکپی ایران
F101_1 Root partition mount error (HDD formatting fails copyir.comکپی ایران : The HDD cannot be connected (mountedکپی ایران caused by damage to the areas in which the program is mainly stored copyir.com
F101_2 Normal partition mount error (HDD normal partition mounting fails copyir.comکپی ایران : The HDD cannot be connected (mountedکپی ایران caused by damage to areas other than those described in the F101_0 and F101_1 errors copyir.com
F101_3 Encryption partition mount error (HDD encryption partition mounting fails copyir.comکپی ایران : The HDD cannot be connected (mountedکپی ایران caused by damage to the areas in which the key is stored copyir.com
F102 HDD start error: HDD cannot become ‘Ready’ state copyir.com
F103 HDD transfer time-out: Reading/writing cannot be performed in the specified period of time copyir.com
F104 HDD data error: Abnormality is detected in the data of HDD copyir.com
F105 HDD other error
F106_0 ADI-HDD error: Illegal disk replacement detected (ADIHDD Exchange to SATA-HDDکپی ایران
F106_1 ADI-HDD error: HDD type detection error
F106_2 ADI-HDD error: ADI encryption key download operation error
F106_3 ADI-HDD error: ADI authentication Admin Password generation error
F106_4 ADI-HDD error: Authentication random number generation error
F106_5 ADI-HDD error: Authentication data transmission error
F109_0 Key consistency error: Consistency check operation error copyir.com
F109_1 Key consistency error: SRAM encryption AES key data damage copyir.com
F109_2 Key consistency error: Signature Check public key damage copyir.com
F109_3 Key consistency error: HDD encryption parameter damage copyir.com
F109_4 Key consistency error: license data damage copyir.com
F109_5 Key consistency error: Encryption key for ADI-HDD is damaged
F109_6 Key consistency error: Administrator password error for ADI-HDD authentication copyir.com
F110 Communication error between System-CPU and Scanner-CPU
F111 Scanner response abnormality
F120 Database abnormality: Database is not operating normally copyir.com
F121 Database abnormality (user information management databaseکپی ایران
F122 Database abnormality (Message/Job log management databaseکپی ایران
F124 Database abnormality : Database is not operating normally copyir.com (Language management databaseکپی ایران
F130 Invaid MAC address
F131 Error due to damage to filtering setting file
F140 ASIC format error: ASIC formatting fails or memory acquiring fails when software is formatted copyir.com
F200 Data Overwrite option (GP-1070کپی ایران disabled
F350 SLG board abnormality
F400 SYS board cooling fan abnormality
F500 HD partition damage
F510 Application start error
F520 Operating system start error
F521 Integrity check error
F550 Encryption partition error
F600 Software update error
F700 Overwrite error
F800 Date error
F900 Model information error
F901 Engine speed error: The speed information of the LGC board is damaged copyir.com
F901_1 Engine speed error: The speed information of the LGC board is damaged copyir.com
اشتراک گذاری در:
در خبرنامه ما عضو شوید
تمامی حقوق این سایت متعلق به کپی ایران بوده و هر گونه بهرهبرداری از آن مستلزم کسب اجازه میباشد.