test title286
6 اردیبهشت, 1402
Menu
C010 Main motor abnormality: The main motor is not rotating normally copyir.com
C020 Developer drive motor abnormality: The developer drive motor is not rotating normally copyir.com
C030 Transport motor abnormality: The transport motor is not rotating normally copyir.com
C040 PFP motor abnormality: The PFP motor is not rotating normally copyir.com (the case that paper can be fed from any drawer except the PFP)
C130 1st drawer tray abnormality: The tray-up motor is not rotating or the 1st drawer tray is not moving normally copyir.com (the case that paper can be fed from any drawer except the 1st drawer)
C140 2nd drawer tray abnormality: The tray-up motor is not rotating or the 2nd drawer tray is not moving normally copyir.com (the case that paper can be fed from any drawer except the 2nd drawer)
C150 PFP upper drawer tray abnormality: The PFP upper drawer tray-up motor is not rotating or the PFP upper drawer tray is not moving normally copyir.com (the case that paper can be fed from any drawer except the PFP upper drawer)
C160 PFP lower drawer tray abnormality: The PFP lower drawer tray-up motor is not rotating or the PFP lower drawer tray is not moving normally copyir.com (the case that paper can be fed from any drawer except the PFP lower drawer)
C180 LCF tray-up motor abnormality: The LCF trayup motor is not rotating or the LCF tray is not moving normally copyir.com (the case that paper can be fed from any drawer except the LCF)
C1A0 LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally copyir.com (the case that paper can be fed from any drawer except the LCF)
C1B0 LCF transport motor abnormality: The LCF transport motor is not rotating normally (when paper can be fed from any drawer except the LCF) copyir.com
C260 Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON copyir.com
C270 (1) Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified time copyir.com
(2) Downloading firmware with an incorrect model copyir.com If the error occurs, the exposure lamp lights twice at the same time copyir.com
C280 Carriage home position sensor not going ON within a specified time
C290 Scanner fuse blowout: 24V power for the scanning system is not supplied at the scanner warming-up after power-ON copyir.com
C360 Charger cleaner motor abnormality: Charger cleaner motor is not rotating or wire cleaner is not moving normally
C370 Transfer belt motor abnormality (Drum TBU motor abnormality)
C380 Auto-toner sensor-K abnormality (upper limit)
C381 Auto-toner sensor-K abnormality (lower limit)
C390 Auto-toner sensor-C abnormality (upper limit)
C391 Auto-toner sensor-C abnormality (lower limit)
C3A0 Auto-toner sensor-M abnormality (upper limit)
C3A1 Auto-toner sensor-M abnormality (lower limit)
C3B0 Auto-toner sensor-Y abnormality (upper limit)
C3B1 Auto-toner sensor-Y abnormality (lower limit)
C3E0 Developer unit replacement (old-new) detection abnormality
C3E1 Drum/cleaner/charger unit replacement (oldnew) detection abnormality
C411 Thermistor or heater lamp abnormality at power-ON: Abnormality of the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON copyir.com
C412 Thermistor/heater lamp abnormality at power- ON: Thermistor abnormality is detected at power-ON or the fuser roller temperature does not rise within a specified period of time after power-ON copyir.com
C443 Heater lamp abnormality after abnormality judgment (not reaching to intermediate temperature)
C445 Heater lamp abnormality after abnormality judgment (pre-running end temperature abnormality)
C446 Heater lamp abnormality after abnormality judgment (pre-running end temperature abnormality)
C447 Heater lamp abnormality after abnormality judgment (temperature abnormality at ready status)
C448 Heater lamp continuous lighting abnormality: Heater lamp lights continuously for a certain period of time when the pressure roller temperature during ready status is higher than the specified
C449 Heater lamp abnormality after abnormality judgment (temperature abnormality at high temperature)
C450 Abnormal temperature difference between the center thermopile and the edge thermistor
(Heater lamp abnormality after abnormality judgment)
C451 Abnormal temperature difference between the center thermopile and the edge thermistor
(Heater lamp abnormality after abnormality judgment)
C452 Abnormal thermopile temperature difference
(Heater lamp abnormality after abnormality judgment)
C465 Pressure roller thermistor abnormality after entering ready status (pre-running end temperature abnormality)
C466 Pressure roller thermistor abnormality after entering ready status (pre-running end temperature abnormality)
C467 Pressure roller thermistor abnormality after entering ready status (temperature abnormality at ready status)
C468 Pressure roller thermistor abnormality after entering ready status (overheating)
C471 IH power voltage abnormality or IH initial abnormality (IH board initial abnormality)
C472 IH power voltage abnormality (power supply abnormality)
C475 IH power voltage abnormality (power supply abnormality when door is opened)
C480 Overheating of IGBT: The temperature of the IGBT rises abnormally copyir.com
C490 IH control circuit or IH coil abnormality: Abnormality is detected in IH control circuit or IH coil is broken/ shorted copyir.com
C4B0 Fuser unit counter abnormality
C4B1 Fuser unit destination selection abnormality
C4C0 Fuser unit new/old detection fuse abnormality
C4D0 Fuser belt thermopile abnormality
C4F0 Center thermistor error correction
C4F1 Side thermistor error correction
C550 RADF I/F error: Communication error has occurred between the RADF and the scanner copyir.com
C551 RADF model detection error
C560 Communication error between Engine-CPU and PFC board
C570 Communication error between Engine-CPU and IPC board
C580 Communication error between IPC board and finisher
C5A0 EEPROM not connected (LGC board)
C5A1 EEPROM data abnormality (LGC board)
C8E0 RADF communication protocol abnormality: The system has to be stopped because the control
C900 Connection error between SYS board and LGC board
C901 System format error for scanner
C910 Toner cartridge IC chip access board abnormality
C911 Toner cartridge IC chip access board abnormality (caused by factors other than C910)
C940 Engine-CPU abnormality
C960 Connection error between LGC board and DRV board, ID abnormality
C962 LGC board ID abnormality
C970 High-voltage transformer abnormality: Leakage of the main charger is detected copyir.com
C9E0 Connection error between SLG board and SYS board
CA00 color registration abnormality
CA10 Polygonal motor abnormality: The polygonal motor is not rotating normally copyir.com
CA20 H-Sync detection error: H-Sync signal detection PC board cannot detect laser beams copyir.com
CB00 Finisher not connected: Communication error has occurred between the equipment and finisher copyir.com
CB01 Finisher communication error: Communication error has occurred between the equipment and finisher copyir.com
CB10 Entrance motor abnormality: The entrance motor is not rotating normally copyir.com
CB11 Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally copyir.com
CB12 Buffer roller drive motor abnormality: The buffer roller drive motor is not rotating or the buffer roller is not moving normally copyir.com
CB13 Finisher exit motor abnormality
CB14 Paper holding arm motor abnormality
CB20 Delivery motor abnormality: Delivery motor or delivery roller is not rotating normally copyir.com
CB30 Movable tray shift motor abnormality: The movable tray shift motor is not rotating or the movable tray is not moving normally copyir.com
CB31 Movable tray paper-full detection error: The actuator of the movable tray paper-full detection sensor does not move smoothly copyir.com
CB40 Front alignment motor abnormality: The front alignment motor is not rotating or the front align/1106ment plate is not moving normally copyir.com
CB50 Staple unit abnormality: Staple unit is not moving normally copyir.com Stapler home position error: The stapler home position sensor does not work copyir.com
CB51 Stapler shift home position error: The stapler is not at the home position copyir.com
CB60 Stapler shift motor abnormality: Stapler shift motor is not rotating or staple unit is not moving normally copyir.com
CB70 Paper loading amount detection sensor abnormality
CB80 Backup RAM data abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON copyir.com
CB81 Flash ROM abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON copyir.com
CB82 Finisher – Main CPU program error
CB83 Saddle Stitch Finisher – Main CPU program error
CB84 Hole Punch Unit – Main CPU program error
CB90 Paper folding blade motor (M12) abnormality
CB91 Saddle Stitch Finisher flash ROM abnormality
CB92 Saddle Stitch Finisher RAM abnormality
CB93 Additional folding motor abnormality
CB94 Saddle transport motor abnormality
CB95 Stacker motor abnormality
CBA0 Front saddle stapler home position error: The stapler home position detection is abnormally operated and finished copyir.com
CBB0 Rear saddle stapler home position error: The stapler home position detection is abnormally operated and finished copyir.com
CBC0 Saddle Stitch Finisher side alignment motor (M15) abnormality: The alignment motor is not rotating or the alignment plate is not working properly copyir.com
CBD0 Guide motor abnormality: Guide motor is not rotating or guide is not moving normally
CBE0 Saddle Stitch Finisher folding motor (M17) abnormality: The folding motor is not rotating or the folding roller is not moving normally copyir.com
CBF0 Stacker motor (M9) abnormality
CC00 Sensor connector abnormality: Connector of guide home position sensor, paper pushing plate home position sensor or paper pushing plate top position sensor is disconnected copyir.com
CC02 Stack exit roller nip home position detection error[MJ-1036] Exit roller nip adjustment motor (M4) abnormality[MJ-1037]
CC10 Micro switch abnormality: With all covers closed, inlet door switch, delivery door switch or front cover switch is open copyir.com
CC20 Saddle communication error
CC21 Saddle stitch 3rd transport roller drive motor (M10) abnormality[MJ-1037]
CC22 Saddle stich stapler home position detection error[MJ-1037]
CC23 An abnormal interruption of the encoder pulse of the folding blade occurrs copyir.com
CC30 Stack transport motor abnormality: The stack transport motor is not rotating or the stack transport belt is not moving normally copyir.com Stack delivery motor abnormality: The stack delivery motor is not rotating normally copyir.com
CC31 Transport motor abnormality: The transport motor is not rotating or the stack transport roller -1 and -2 is not rotating normally copyir.com
CC40 Swing motor abnormality: Swing motor is not rotating or swing unit is not moving normally
CC41 Paper holder cam home position abnormality: The paper holder cam is not at the home position copyir.com
CC50 Horizontal registration motor abnormality: Horizontal registration motor is not rotating or puncher is not shifting normally
CC51 Sideways adjustment motor (M2) abnormality: Sideways adjustment motor is not rotating or puncher is not shifting normally copyir.com
CC52 Skew adjustment motor (M1) abnormality: Skew adjustment motor is not rotating or puncher is not shifting normally copyir.com
CC53 Punch waste full sensors (S41 and S42) abnormality[MJ-1037]
CC54 Abnormality of paper detection sensors (S24 and S25)[MJ-1036] Abnormality of trailing edge detection sensors (S39 and S40) and horizontal registration detection sensors (S39 and S40)[MJ-1037]
CC60 Punch motor abnormality [MJ-1036] Punch motor (M15) abnormality [MJ-1037]
CC61 Punch motor (M3) home position detection error: Punch motor is not rotating or puncher is not shifting normally copyir.com
CC71 Punch ROM checksum error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on copyir.com
CC72 Punch RAM read/write error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on copyir.com
CC80 Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally copyir.com
CC90 Tray shift motor abnormality: The tray shift motor is not rotating or the stack tray is not moving normally copyir.com
CC91 The detection of the home position of the gripper arm ends abnormality copyir.com
CC92 Movable tray upper limit detection error [MJ- 1037]
CC93 Knurled roller shift solenoid abnormality [MJ- 1036]
CC94 Fan motor abnormality[MJ-1036]
CCB0 Offset motor abnormality: The offset motor is not rotating normally copyir.com
CCD0 Stack ejection motor abnormality: Stack ejection motor or stack ejection roller is not rotating normally
CCE0 Paper trailing edge assist motor abnormality: Paper trailing edge assist motor is not rotating or paper trailing edge assist is not moving normally
CCF0 Gear changing motor abnormality: Gear changing motor is not rotating normally
CCF1 Tray safety switch abnormality –
(1) The tray safety switch turned on during tray operation (moving up or down) copyir.com
(2) The tray operated with the tray safety switch turned on copyir.com
CD70 Waste toner box mixing paddle locked: The mixing paddle in the waste toner box does not rotate copyir.com
CD71 Waste toner motor locking error (“Waste toner box replacement”): “Waste toner box replacement” appears when either CD70 or CD71 error occurs copyir.com The error code CD72 is noted on the error history and logs copyir.com
CDE0 Paddle motor abnormality: The paddle motor is not rotating or the paddle is not rotating normally copyir.com
CE00 Communication error (signal transmission to the Hole Punch Unit) [MJ-1037]
CE00 Communication error between finisher and punch unit: Communication error between finisher controller PC board and punch controller PC board
CE10 Image quality sensor abnormality (OFF level): The output value of this sensor is out of a specified range when sensor light source is OFF
CE20 Image quality sensor abnormality (no pattern level): The output value of this sensor is out of a specified range when the image quality control test pattern is not formed copyir.com
CE40 Image quality control test pattern abnormality: The test pattern is not formed normally
CE41 Image quality TRC control test pattern abnormality: The image quality TRC control test pattern is not printed normally copyir.com
CE50 Temperature/humidity sensor abnormality: The output value of this sensor is out of a specified range copyir.com
CE60 Drum thermistor-Y abnormality: The output value of the drum thermistor-Y is out of a specified range
CE70 Drum drive switching abnormality: The drum switching detection sensor (S19) is not turned ON after the drum motor was rotated for a specified period of time copyir.com
CE71 Drum phase adjustment abnormality: Drum phase sensors (Color drum phase sensor (S43) and K drum phase sensor (S44)) are not turned ON after the drum motor was rotated for a specified period of time copyir.com
CE80 LED head communication error
CE81 Interface initialization error between LED head and LGC board
CE90 Drum thermistor-K abnormality: The output value of the drum thermistor-K is out of a specified range copyir.com
CEC0 2nd transfer roller position detection abnormality: The 2nd transfer roller does not contact/release normally copyir.com
CEC1 2nd transfer roller contacting position detection abnormality
CEC2 2nd transfer roller releasing position detection abnormality
CF10 Communication module SRAM reading failure copyir.com
CF90 Laser optical unit shutter abnormality copyir.com
CF91 NVRAM abnormality on the SYS board
CF92 SRAM and NVRAM abnormality on the SYS board
E010 Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor copyir.com
E011 Transfer belt paper-clinging jam: The paper after the 2nd transfer is clinging to the transfer belt, or a paper jam occurred between the registration roller and the paper clinging detection sensor copyir.com
E013 The paper jam occurred between the registration pass sensor and the paper clinging detection sensor copyir.com
E020 Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor copyir.com
E030 Power-ON jam: The paper is remaining on the paper transport path when power is turned ON copyir.com
E061 Incorrect paper size setting for 1st drawer: The size of paper in the 1st drawer differs from size setting of the equipment copyir.com
E062 Incorrect paper size setting for 2nd drawer: The size of paper in the 2nd drawer differs from size setting of the equipment copyir.com
E063 Incorrect paper size setting for PFP upper drawer: The size of paper in the 3rd drawer differs from size setting of the equipment copyir.com
E064 Incorrect paper size setting for PFP lower drawer: The size of paper in the 4th drawer differs from size setting of the equipment copyir.com
E065 Incorrect paper size setting for bypass tray: The size of paper in the bypass tray differs from size setting of the equipment copyir.com
E090 Image data delay jam: Image data to be printed cannot be prepared
E091 Motor-ON time-out jam: The equipment does not operate normally because abnormality occurred on an interface between the SYS board and engine firmware copyir.com
E0A0 Image transport ready time-out jam: Image data to be printed cannot be sent copyir.com
E110 ADU misfeeding (Paper not reaching the registration sensor): The paper which has passed through ADU does not reach the registration sensor during duplex printing copyir.com
E120 Bypass misfeeding (Paper not reaching the bypass feed sensor): Paper fed from the bypass tray does not reach the bypass feed sensor copyir.com
E130 1st drawer misfeeding (Paper not reaching the 1st drawer feed sensor): The paper fed from the 1st drawer does not reach the 1st drawer feed sensor copyir.com
E140 2nd drawer misfeeding (Paper not reaching the 2nd drawer feed sensor): The paper fed from the 2nd drawer does not reach the 2nd drawer feed sensor copyir.com
E150 PFP upper drawer misfeeding (Paper not reaching the PFP upper drawer feed sensor): The paper fed from the PFP upper drawer does not reach the PFP upper drawer feed sensor copyir.com
E160 PFP lower drawer misfeeding (Paper not reaching the PFP lower drawer feed sensor): The paper fed from the PFP lower drawer does not reach the PFP lower drawer feed sensor copyir.com
E190 LCF misfeeding (Paper not reaching the LCF feed sensor): The paper fed from the LCF does not reach the LCF feed sensor copyir.com
E200 1st drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor copyir.com
E210 2nd drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor copyir.com
E220 2nd drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor copyir.com
E270 Bypass transport jam (Paper not reaching the registration sensor): Paper fed from the bypass tray and passed through the bypass feed sensor does not reach the registration sensor copyir.com
E300 PFP upper drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor copyir.com
E310 PFP upper drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor copyir.com
E320 PFP upper drawer transport jam (Paper not reaching the 2nd drawer feed sensor): The paper does not reach the 2nd drawer feed sensor after it has passed the PFP upper drawer feed sensor copyir.com
E330 PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st drawer feed sensor copyir.com
E340 PFP lower drawer transport jam (Paper not reaching the 1st drawer feed sensor): The paper does not reach the 1st drawer feed sensor after it has passed the 2nd drawer feed sensor copyir.com
E350 PFP lower drawer transport jam (Paper not reaching the 2nd drawer feed sensor): The paper does not reach the 2nd drawer feed sensor after it has passed the PFP upper drawer feed sensor copyir.com
E360 PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor copyir.com
E3C0 LCF transport jam (Paper not reaching the registration sensor): Paper fed from the LCF and passed through the 1st drawer feed sensor does not reach the registration sensor copyir.com
E3D0 LCF transport jam (Paper not reaching the registration sensor): Paper fed from the LCF and passed through the 1st drawer feed sensor does not reach the registration sensor copyir.com
E3E0 LCF transport jam (Paper not reaching the 2nd drawer feed sensor): Paper fed from the LCF and passed through the LCF feed sensor does not reach the 2nd drawer feed sensor copyir.com
E400 Jam access cover open jam: The jam access cover has opened during printing copyir.com
E410 Front cover open jam: The front cover has opened during printing copyir.com
E420 PFP side cover open jam: The PFP side cover has opened during printing copyir.com
E430 ADU open jam: The ADU has opened during printing copyir.com
E440 Side cover open jam: The side cover has opened during printing copyir.com
E450 LCF side cover open jam: The LCF side cover has opened during printing copyir.com
E480 Bridge unit open jam: The bridge unit has opened during printing copyir.com
E4A0 Waste toner cover open jam: The waste toner cover has opened during printing copyir.com
E510 Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section copyir.com
E520 Stop jam in the ADU: The paper does not reach the ADU exit sensor after it has passed the ADU entrance sensor copyir.com
E550 Paper remaining jam on the transport path: The paper is remaining on the transport path when printing is finished copyir.com
E551 Paper remaining jam on the transport path (when a service call occurs)
E552 Paper remaining jam on the transport path (when the cover is closed)
E712 Jam not reaching the original registration sensor: The original fed from the original feeding tray does not reach the original registration sensor
E714 Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray copyir.com
E721 Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side) copyir.com
E722 Jam not reaching the original exit/reverse sensor (during scanning): The original which passed the read sensor does not reach the original exit/reverse sensor when it is transported from the scanning section to exit section copyir.com
E724 Stop jam at the original registration sensor: The trailing edge of the original does not pass the original registration sensor after its leading edge has reached this sensor copyir.com
E725 Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor copyir.com
E726 Transport/exit signal reception jam: RADF receives the transport/exit reception signal from the equipment when no original is at the exposure waiting position
E731 Stop jam at the original exit/reverse sensor: The trailing edge of the original does not pass the original exit/reverse sensor after its leading edge has reached this sensor copyir.com
E860 RADF jam access cover open: The RADF jam access cover has opened during RADF operation copyir.com
E870 RADF open jam: RADF has opened during RADF operation
E871 Cover open jam in the read ready status
E910 Jam at the bridge unit transport sensor 1: The paper does not reach the bridge unit transport sensor 1 after it has passed the exit sensor copyir.com
E920 Stop jam at the bridge unit transport sensor 1: The trailing edge of the paper does not pass the bridge unit transport sensor 1 after its leading edge has reached the sensor copyir.com
E930 Jam at the bridge unit transport sensor 2: The trailing edge of the paper does not reach the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 1 copyir.com
E940 Stop jam at the bridge unit transport sensor 2: The trailing edge of the paper does not pass the bridge unit transport sensor 2 after its leading edge has reached the bridge unit transport sensor 2 copyir.com
E9F0 Punching jam: Punching is not performed properly copyir.com [MJ-1101/1106 (when MJ-6103 is installed)]
EA10 Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor copyir.com[MJ-1031/1101] The paper which has passed the bridge unit does not reach the inlet sensor copyir.com [MJ-1106]
EA20 Paper transport stop jam: The paper does not pass through the inlet sensor copyir.com The paper which has passed through the inlet sensor does not reach the feeding sensor copyir.com [MJ- 1101/1106]
EA21 Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec copyir.com [MJ-1101/1106]
EA22 Paper transport jam (Finisher paper punching edge detection sensor): The paper position sensor on the Finisher transport path detects paper shorter than the acceptable paper size copyir.com [MJ-1101/1106]
EA23 Paper transport jam (transport sensor): Paper being transported on the Finisher transport path is stopped at the outlet sensor at 27 copyir.com56 inches or longer copyir.com [MJ-1101/1106]
EA24 Paper transport jam (between entrance and transport sensors): The leading edge of paper which has passed the entrance sensor on the Finisher transport path does not reach the transport sensor copyir.com [MJ-1101/1106
EA25 Paper transport jam (after paper stack exit): The finishing tray paper detection sensor detects paper after a stack of paper exits from the finishing tray copyir.com [MJ-1101/1106]
EA26 Paper transport jam (stop command request): A command to stop equipment operation is received while paper is being transported in the Finisher copyir.com [MJ-1101/1106]
EA27 Paper transport jam (paper not inserted): The equipment detects a paper-not-inserted jam but the entrance sensor is turned ON before the equipment is stopped copyir.com [MJ-1101/1106]
EA28 Paper transport jam (paper holder plate operation delay): An attempt to start the arm assisting operation for dropping paper on the finishing tray is made, but the previous arm assisting operation has not yet been finished copyir.com [MJ-1101/1106]
EA29 Paper transport jam (stack transport delay): The buffer tray is extended to drop a stack of paper on the finishing tray but the previous stack has not yet exited copyir.com [MJ-1101/1106]
EA30 Power-ON jam: Paper exists at the inlet sensor when power is turned ON copyir.com [MJ-1031]
EA31 Transport path paper remaining jam: The paper which has passed through the inlet sensor does not reach the transport sensor copyir.com [MJ-1101/ 1106]
EA32 Exit paper remaining jam: The paper is remaining on the finishing tray when the power is turned ON copyir.com [MJ-1101/1106]
EA40 Joint open jam: The finisher cover opened during machine operation copyir.com [MJ-1031] Cover open error: The front cover or stationary tray is opened during paper transport copyir.com [MJ-1106]
EA50 Stapling jam: Stapling is not performed properly copyir.com [MJ-1031/1101]
EA60 Early arrival jam: The inlet sensor detects the paper earlier than a specified timing copyir.com [MJ-1031/1101/1106]
EA70 Stack exit belt home position error: The stack exit belt is not at the home position copyir.com [MJ-1101/ 1106] Stack slider home position error: The stack slider is not at the home position copyir.com [MJ-1031]
EA90 Door open jam: The delivery cover or inlet cover has opened during printing copyir.com [MJ-1106]
EAA0 Paper remaining in Saddle Stitch Finisher: Paper remaining in Saddle Stitch Finisher [MJ- 1106]
EAB0 Paper transport jam in Saddle Stitch Finisher: Paper transport jam in Saddle Stitch Finisher [MJ-1106]
EAB1 Short paper jam: Short paper jam (Saddle Stitch Finisher) [MJ-1106]
EAD0 Print end command time-out jam: The printing has not finished normally because of an error occurring on the interface between the SYS board and the engine firmware at the end of printing copyir.com
EAE0 Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher copyir.com
EB30 Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing copyir.com
EB50 Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper copyir.com
EB60 Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at [EB50]) copyir.com
ED10 Skew adjustment motor (M1) home position detection abnormality: The Skew adjustment motor is not at the home position copyir.com [MJ-1101/ 1106 (when MJ-6103 is installed)]
ED11 Sideways adjustment motor (M2) home position detection error: The Sideways adjustment motor is not at the home position copyir.com [MJ-1101/1106 (when MJ-6103 is installed)]
ED12 Shutter home position error: The shutter is not at the home position copyir.com [MJ-1101/1106]
ED13 Front alignment plate home position error: The front alignment plate is not at the home position copyir.com [MJ-1101/1106]
ED14 Rear alignment plate home position error: The rear alignment plate is not at the home position copyir.com [MJ-1101/1106]
ED15 Paddle home position error: The paddle is not at the home position copyir.com [MJ-1101/1106]
ED16 Buffer tray home position error: The buffer tray is not at the home position copyir.com [MJ-1101/1106]
EF10 Paper not supported for Saddle Stitch Finisher: Unsupported paper size, type and an excess number of pages for stapling are selected copyir.com [MJ- 1106]
EF11 Saddle Stitch Finisher stapling error (front): Front stapling is not correctly done copyir.com [MJ-1106]
EF12 Saddle Stitch Finisher stapling error (rear): Rear stapling is not correctly done copyir.com [MJ-1106]
EF13 Saddle paper holder home position detection abnormality: The paper holder home position cannot be detected copyir.com [MJ-1106]
EF14 Saddle paper exit jam: Outputting paper is not completed within a fixed time copyir.com [MJ-1106]
EF15 Saddle Stitch Finisher side alignment motor home position detection abnormality: The side alignment motor home position cannot be detected copyir.com [MJ-1106]
EF16 Saddle Stitch Finisher stacker motor home position detection abnormality: The stacker motor home position cannot be detected copyir.com [MJ- 1106]
EF17 Saddle Stitch Finisher folding blade home position detection abnormality: The folding blade home position cannot be detected copyir.com [MJ- 1106]
EF18 Saddle Stitch Finisher additional folding roller home position detection abnormality: The additional folding roller home position cannot be detected copyir.com [MJ-1106]
EF19 Saddle paper folding jam: Fold processed paper cannot be transported to the additional folding roller copyir.com [MJ-1106]
EF20 Saddle stacker jam: Transported paper cannot be detected in the stacker copyir.com
F070 Communication error between System-CPU and Engine-CPU
F071 Communication initialization error between System-CPU and Engine-CPU
F090 SRAM abnormality on the SYS board
F100 HDD format error: HDD cannot be initialized normally
F100_0 HDD format error: Operation of HDD key data fails copyir.com
F100_1 HDD format error: Encryption key data of either the SYS board or the SRAM board for the SYS board are damaged copyir.com
F100_2 HDD format error: Encryption key data of both the SYS board and the SRAM board for the SYS board are damaged copyir.com
F101 HDD unmounted: Connection of HDD cannot be detected
F101_0 HDD connection error (HDD connection cannot be detected copyir.com)
F101_1 Root partition mount error (HDD formatting fails copyir.com): The HDD cannot be connected (mounted) caused by damage to the areas in which the program is mainly stored copyir.com
F101_2 Normal partition mount error (HDD normal partition mounting fails copyir.com): The HDD cannot be connected (mounted) caused by damage to areas other than those described in the F101_0 and F101_1 errors copyir.com
F101_3 Encryption partition mount error (HDD encryption partition mounting fails copyir.com): The HDD cannot be connected (mounted) caused by damage to the areas in which the key is stored copyir.com
F102 HDD start error: HDD cannot become ‘Ready’ state copyir.com
F103 HDD transfer time-out: Reading/writing cannot be performed in the specified period of time copyir.com
F104 HDD data error: Abnormality is detected in the data of HDD copyir.com
F105 HDD other error
F106 Point and Print partition damage
F106_0 ADI-HDD error: Illegal disk replacement detected (ADI-HDD Exchange to SATA-HDD)
F106_1 ADI-HDD error: HDD type detection error
F106_2 ADI-HDD error: ADI encryption key download operation error
F106_3 ADI-HDD error: ADI authentication Admin Password generation error
F106_4 ADI-HDD error: Authentication random number generation error
F106_5 ADI-HDD error: Authentication data transmission error
F108 SHA partition damage
F109_0 Key consistency error: Consistency check operation error copyir.com
F109_1 Key consistency error: SRAM encryption AES key data damage
F109_2 Key consistency error: Signature Check public key damage copyir.com
F109_3 Key consistency error: HDD encryption parameter damage copyir.com
F109_4 Key consistency error: license data damage copyir.com
F109_5 Key consistency error: Encryption key for ADIHDD is damaged copyir.com
F109_6 Key consistency error: Administrator
password error for ADI-HDD authentication copyir.com
F110 Communication error between System-CPU and Scanner-CPU
F111 Scanner response abnormality
F120 Database abnormality: Database is not operating normally copyir.com
F121 Database abnormality (user information management database)
F122 Database abnormality (Message/Job log management database)
F124 Database abnormality: Database is not operating normally copyir.com (Language management database)
F130 Invalid MAC address
F131 Error due to damage to filtering setting file
F140 ASIC format error: ASIC formatting fails or memory acquiring fails when software is formatted
F200 Data Overwrite option (GP-1070) disabled
F350 SLG board abnormality
F400 SYS board cooling fan abnormality
F500 HD partition damage
F510 Application start error
F520 Operating system start error
F521 Integrity check error
F550 Encryption partition error
F600 Software update error
F700 Overwrite error
F800 Date error
F900 Machine information alignment error
F902_0 Mistaken HDD installation error
F902_1 System firmware / System software model information error – Invalid system firmware/ software is installed on 20/25 ppm model copyir.com
F902_3 System firmware / System software model information error – Invalid system firmware/ software is installed on LL20/LL25 ppm model copyir.com
اشتراک گذاری در:
در خبرنامه ما عضو شوید
تمامی حقوق این سایت متعلق به کپی ایران بوده و هر گونه بهرهبرداری از آن مستلزم کسب اجازه میباشد.