C21    Master Loading Error (onto the Drum)
• If the Master sensor does not detect the master (light not reflected) during the master loading when the Drum is at 79° from the position-A     copyir.com
C22    Master Misfeed
• If the Master positioning sensor does not detect the master (light not reflected) within 944 pulses after the Write pulse motor activates     copyir.com • If the light path of the Master tension plate sensor is blocked (Master tension plate is down) when the master feeding has started     copyir.com
C23    Master Cut Malfunction
• If the Master positioning sensor is still detecting the master (light reflected back) when the Drum is at position-A after the cutting operation and the Master tentioning plate sensor is ON     copyir.com • If the Master sensor detects the master on the Drum again just after 'C23' error is cleared, 'C23' will be displayed again     copyir.com Note: 'C23' will be displayed without pressing '* ' key     copyir.com
C25    Master Removal Error
• If the Master removal sensor does not detect the removed master (light path opened) when the Drum rotates to either 70° or 90° from the position-A during the master removal, when a master was detected on the Drum     copyir.com
C26    Removed Master Jammed at the Master removal area
• If the Master removal sensor is detecting the removed master (light path blocked) even though the Drum has returned to the position-A after the master removal process     copyir.com
C27    No Master on the Drum
• If the Master sensor does not find master on the Drum when the Drum is at 79° during the printing movement     copyir.com
C31    Paper Jam in the Second Paper Feed Area
• If the Paper receiving sensor does not find paper when the Drum is at Position-A during the printing operation and the Paper sensor finds a paper at next Drum Position-A     copyir.com
C32    Paper Jam in the Paper Receiving Area
• If the status of the Paper receiving sensor does not change from detecting paper to not detecting from one Drum Position-A to the next during printing     copyir.com
C33    Paper Jam in the First Paper Feed Area
• If the Paper sensor does not detect paper at Drum angle 135° within three Drum rotations during printing     copyir.com
C34    Paper Jam on the Drum
• If the Paper receiving sensor does not detect paper at one Drum Position-A and the Paper sensor detects paper at next Drum Position-A     copyir.com
C37    Original Jam at Entrance
• During the Original set movement, if the Original IN sensor does not detect Original (sensor light not reflected) within 1712 pulses after the Read pulse motor activates     copyir.com • During the Original set movement, if the Original IN sensor stops detecting the Original before the Read pulse motor activates 347 pulses     copyir.com
C38    Original Jam or Oversize
• During the Original scanning, if the Original IN sensor keeps detecting Original (sensor light reflected) and does not stop detecting within 4945 pulses after the Read pulse motor activates     copyir.com
C41    Replace Ink Cartridge
• If the Ink sensor does not detect ink in the Squeegee unit within 20 seconds after the Inking motor was activated     copyir.com • If the Ink sensor does not detect ink in the Squeegee unit within 80 seconds after the Drum idling has started     copyir.com
C42    Replace Master Roll
• If the black tape attached at the end of the Master roll has been detected by the Master end sensor during master making or confidential operation     copyir.com
C43    Empty Disposal Box
• If the Master full detection sensor does not detect the Master compress plate during the master compressing process     copyir.com
C44    Add Paper
• If the light path of the Paper detection sensor is open     copyir.com
C49    Close Master Removal Unit
• If the actuator of the Master disposal unit set switch is not depressed     copyir.com
C51    Insert Card into Key/Card Counter
• If an operator card is not set in the Key/Card counter     copyir.com
C52    Set Drum in Place
• If the Drum set sensor does not detect the Drum     copyir.com
C53    Set Ink Cartridge in Place
• If the Ink Cartridge set switches do not detect the Ink Cartridge     copyir.com • If deferent type of Ink Cartridge is inserted in the Drum     copyir.com
C56    Close ADF Unit
• If the ADF unit set sensor does not detect the ADF unit     copyir.com
C58    Close Master Making Unit
• If the actuator of the Master making unit set switch is not depressed     copyir.com
C61    Drum size error
• If Memory switch No     copyir.com200 is selected to wrong machine model or wrong model Drum is set in the machine     copyir.com
E01    Main Motor Lock
• If excessive current is detected 0     copyir.com3 seconds consecutively after the Main motor is activated     copyir.com • If no Encoder sensor output after Main motor is activated     copyir.com
E02    Elevator Motor Lock
• When the light path of the Upper limit sensor or the Lower limit sensor is not cut within 10 seconds after the Elevator motor is activated     copyir.com • If the light path of both the Upper limit and Lower limit sensors are blocked when the Elevator motor is activated     copyir.com • If excessive current is detected 0     copyir.com3 seconds consecutively after the Elevator motor is activated     copyir.com
E03    Clamp Motor Lock [During Clamp Motor Initial Positioning]
• If the light path of the Clamp senors both A and B are not opened within 13 seconds after after the Clamp motor is activated     copyir.com [During Master Release from the Clamp Plate] • If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated     copyir.com • If the light path of the Clamp sensor B is not opened within 12 seconds after the Clamp motor is activated     copyir.com [When the Clamp Plate opens during Master Clamping] • If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated     copyir.com • If the light path of the Clamp sensor A is not opened within 5 seconds after the Clamp motor is activated     copyir.com [When the Clamp Plate closes during Master Clamping] • If the light path of the Clamp sensor B is not opened within 5 seconds after the Clamp motor is activated     copyir.com
E04    Ink Overflow
• If the Overflow sensor detects excessive ink in the Squeegee unit     copyir.com
E05    Print Positioning Motor Lock
• If the Vertical centering sensor status has not been changed from ON to OFF (or OFF to ON) within 3550 ms after the Print positioning motor activated     copyir.com
E06    Position-A Sensor Malfunction
• If Position-A sensor cannot be detected (or keeps detecting) even though the Main motor encoder sensor signal is making the output after the Main motor is activated     copyir.com
E07    Master Compressing Motor Lock
[When compressing] • If the light path of the Master compressing sensor is not opened within 10 seconds after the Master compressing motor is activated     copyir.com [When returning back] • If the light path of the Master compressing sensor is not opened (or closed) within 1 second after the Master compressing motor is activated     copyir.com
E08    Communication Error between TR and Interface Accessaries
• If a communication error has occurred between the CPU and the interface accessaries     copyir.com
E10    Shading Error
• If the Shading compensation is not made     copyir.com
E13    Cutter Motor Lock
• If the Cutter position switch is not turned OFF within 75 ms after the Cutter motor is activated     copyir.com • If the Cutter position switch is not pressed within 450 ms after the Cutter motor is activated     copyir.com
E14    Master Removal Motor Lock
• If excessive current is detected 0     copyir.com3 seconds consecutively after the Master removal motor is activated     copyir.com
E15    Master Tension Plate Lock
• If the light path of the Master tension plate sensor is not blocked within 384 pulse rotation of the Read pulse motor rotated in the reverse direction     copyir.com • If master loading error is detected at Drum angle 79° and if the Master tension plate sensor is blocked     copyir.com
E16    Inking Motor Lock
• If excessive current is detected 0     copyir.com3 seconds consecutively after the Inking motor is activated     copyir.com
E20    Paper Ejection Motor Lock
• If excessive current is detected 0     copyir.com3 seconds consecutively after the Paper ejection motor is activated     copyir.com
E50    Connect "Copy/Master" Counter
• If the connector of the Counter is not connected     copyir.com
E78    Machine Model Selection Error
• If Memory switch No     copyir.com200 is selected to 9~F     copyir.com