Your browser does not support JavaScript! > ریسو گراف gr1750

   کانال تلگرام کپی ایران

(0) محصول
سه شنبه, 24 فروردين 1395 17:17

ریسو گراف gr1750

نوشته شده توسط
این مورد را ارزیابی کنید
(0 رای‌ها)

E 01    Main Motor Lock
Displayed to interrupt the machine operation:
1     copyir.com If the Drum position A is still detected by the Position A detection sensor 2 seconds after the Main motor started.
2     copyir.com If the Drum position A hasn’t been detected by the Position A detection sensor within 5 seconds after the Main motor is started.
E 02    Elevator Motor Lock
Displayed to interrupt the machine operation:
1     copyir.com If the actuator of the Elevator upper limit sensor is not raised within 9 seconds after the Elevator motor started to raise the Paper feed tray.
2     copyir.com If the light path of the Elevator lower limit sensor is not blocked within 9 seconds after the Elevator motor started to lower the Paper feed tray.
3     copyir.com If the light path of the Elevator lower limit sensor is blocked 2 seconds after the Elevator motor started to raise the Paper feed tray.
4     copyir.com If the actuator of the Elevator upper limit sensor is still raised 2 seconds after the Elevator motor started to lower the Paper feed tray.
E 03    Clamp Error 1
Displayed to interrupt the machine operation:
1     copyir.com If the actuator of the Clamp safety switch is still depressed 4 seconds after the Clamp solenoid was activated (turned on     copyir.com.
2     copyir.com If the actuator of the Clamp safety switch has not been depressed within 4 sec. after the Clamp solenoid was released (turned off     copyir.com.
3     copyir.com If the Angular magnet has not been detected by the Angular sensor (either 0° or 180°     copyir.com within 8 seconds after the Clamp motor started rotating.
4     copyir.com If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation.
E 04    Ink Overflow
Displayed to interrupt the machine operation:
1     copyir.com If the Overflow sensor detects excessive ink in the Squeegee unit.
E 05    Print Positioning Motor Lock
Displayed to interrupt the machine operation:
1     copyir.com If the Vertical centering sensor status has not been changed from ON to OFF (or OFF to ON     copyir.com within 12 seconds after the Print positioning motor started rotating.
E 06    Pressure Detection Sensor Malfunction
Displayed to interrupt the machine operation:
1     copyir.com If the Pressure detection sensor status has not been changed from ON to OFF (or OFF to ON     copyir.com within 8 seconds after the Main motor started rotating.
E 07    Communication error between RA and RA Digitizer
Displayed to interrupt the machine operation:
1     copyir.com If a communication error has occurred between the CPU and RA digitizer.
E 08    Communication error between RA and Interface Accessaries
Displayed to interrupt the machine operation:
1     copyir.com If a communication error has occurred between the CPU and the interface accessaries.
E 09    Communication error between RA and the Sorters
Displayed to interrupt the machine operation:
1     copyir.com If a communication error has occurred between the CPU and the sorters.
E 10    Malfunction of Trimming PCB
Displayed to interrupt the machine operation:
1     copyir.com If data signals such as original size, are not output from the Trimming PCB at the start of the image scanning operation.
E 11    Pressure Control Motor Lock
Displayed to interrupt the machine operation:
1     copyir.com If the pulse from the Encoder disc on the Pressure control motor has not been detected within 100ms from the start of the Pressure control motor.
2     copyir.com If the Pressure centering sensor status has not been changed from ON to OFF (or OFF to ON     copyir.com within 5 seconds from the start of the Pressure control motor.
E 12    Machine Model Selection Error
Displayed to prevent the machine operation: The SW2 (HEX SW     copyir.com selection on the System PCB is set to "Not Used" position.
E 13    Cutter Motor Lock
Displayed to interrupt the machine operation in master-making and confidential process:
1     copyir.com If master is detected by the Master positioning sensor at Drum A position after the cutting operation and besides it is still detected by the Master positioning sensor at the next Drum A position detection after the second cutting operation.
E 14    Clamp Error 2
Displayed to interrupt the machine operation:
1     copyir.com If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation.
E 15    Flat Bed Read Pulse Motor Lock
Displayed to interrupt the machine operation:
1     copyir.com If the Image scanner home position sensor does not detect the Image scanner within 18898 pulses after the Flat bed read pulse motor is activated.
2     copyir.com If the Image scanner ADF Shading sensor does not detect the Image scanner within 15748 pulses after the Flat bed read pulse motor is activated.
3     copyir.com If the Image scanner is not release from the Image scanner home position sensor within 314 pulses after the Flat bed read pulse motor is activated.
4     copyir.com If the Image scanner is not released from the Image scanner ADF Shading sensor within 314 pulses after the Flat bed read pulse motor is activated.
E 16    Position C Sensor Malfunction
Displayed to interrupt the machine operation:
1     copyir.com If the Position C sensor status has not been changed from ON to OFF (or OFF to ON     copyir.com within 8 seconds from the start of the Main Motor.
E 17    Replace Battery
Displayed to interrupt the machine operation:
1     copyir.com If the Battery detection signal is OFF at either of following three cases. <1> when the machine power is turned ON <2> when All reset button is pressed <3> at the end of machine operation.
E 18    Sorter Error
Displayed to interrupt the machine operation:
1     copyir.com If an error signal is received from the sorter.
E 19    Thermal Pressure Motor Lock
Displayed to interrupt the machine operation:
1     copyir.com If the TPH Pressure switch has not been depressed within 4 seconds after the TPH Pressure motor was activated to lower the TPH.
2     copyir.com If the TPH Pressure switch has not been released within 4 seconds after the TPH Pressure motor was activated to raise the TPH.
E 20    Wing Motor Lock
Displayed to interrupt the machine operation:
1     copyir.com If neither of the Jump wing sw1 or sw2 has been depressed within 5 seconds after the Wing motor was activated.
2     copyir.com If neither of the Jump wing sw1 or sw2 has been released within 5 seconds after the Wing motor was activated.
E 21    Master Loading Error (onto the Drum     copyir.com
Displayed to interrupt the machine operation:
1     copyir.com If the Master load sensor does not detect master at the Drum C-1 position during loading of the master on the Drum.
E 22    Master Mis-Feed
Displayed after the master has been loaded onto the Drum in the master making or confidential process:
1     copyir.com If the Master positioning sensor has not detected master material within 787 pulses (536 pulses in confidential process     copyir.com after the Loading pulse motor started following the master cutting operation. Displayed to interrupt the machine operation when the Master loading button was pressed: 1     copyir.com If the Master positioning sensor has not detected master material within 1260 pulses after the Loading pulse motor was turned on.
2     copyir.com If the Master positioning sensor has not detected master material within 787 pulses after the Loading pulse motor was turned on following the operation of the Cutter motor and the cut master material is removed.
E 23    Master Cut Malfunction
Displayed to interrupt the machine operation in master-making and confidential process:
1     copyir.com If master is detected by the Master positioning sensor at Drum A position after the cutting operation and besides it is not detected by the Master positioning sensor at the next Drum A position detection after the second cutting operation.
E 24    A Cut Piece of Master Remains inside the Machine Displayed:
1     copyir.com If the Master positioning sensor detects master material (the reflected light     copyir.com just after the master cut operation is completed.
E 25    Master Removal Error
Displayed after the Image scanning and Master making operations are completed or in the confidential operation:
1     copyir.com If the Master removal sensor does not detect a removed master while the Drum rotates from C-1 to A position, during master removal operation.
2     copyir.com If the light path of the Master removal sensor is still blocked by a removed master when the Vertical transport motor stops.
E 26    Removed Master Jammed at the entrance of Master disposal box.
Displayed:
1     copyir.com If the light path of the Master removal sensor is blocked at the start of master-making operation.
E 27    No Master on Drum
Displayed to interrupt the machine operation:
1     copyir.com If the Master sensor does not detect master on the drum at the Drum A position when the printing starts.
E 31    Paper Jam in the Second Paper Feed Area
Displayed to interrupt the machine operation:
1     copyir.com If the Paper sensor malfunctions.
2     copyir.com If the Paper sensor detects paper when the Pressure detection sensor detects the Pressure disc.
3     copyir.com If at the Drum A position, the Paper receiving sensor 1 does not detect paper and at the next Drum A position, the Paper sensor detects the paper.
E 32    Paper Jam around Paper Receiving Sensor 1
Displayed to interrupt the machine operation:
1     copyir.com If the Paper receiving sensor 1 detects paper when the Pressure detection sensor detects the Pressure disc.
2     copyir.com If the Paper receiving sensor 2 detects paper when the Paper receiving sensor 1 detects the next sheet of paper.
E 33    Paper Jam in the First Paper Feed Area
Displayed to interrupt the machine operation:
1     copyir.com If the Paper sensor has not detected paper while the Position A sensor detects the A position three times.
E 34    Paper Jam under the Drum
Displayed to interrupt the machine operation:
1     copyir.com If the Paper receive sensor 1 does not detect paper at the Drum A position and the Paper sensor does not detect the paper at the next Drum A position.
E 36    Original Misfeed
Displayed to interrupt the machine operation:
1     copyir.com If the actuator of the Registration sensor is not opened within 1.35 seconds after the Original pickup motor was turned on.
E 37    Original Jam at Entrance
Displayed to interrupt the machine operation:
1     copyir.com If the Original IN sensor has not detected an original within 630 pulses after the Read pulse motor was turned on.
E 38    Original Jam or Oversize
Displayed after the master has been loaded onto the Drum:
1     copyir.com If the light path of the Original IN sensor is blocked for 14,173 pulses (FB type = 14,803     copyir.com after the Read pulse motor is turned on.
E 39    Original Jam at the Exit
Displayed after the master has been loaded onto the Drum:
1     copyir.com If the Original OUT sensor has been blocked for 1,890 pulses after the Read pulse motor was turned on.
E 45    Non-Compatible Master Roll (1     copyir.com
Dispalyed to prevent the machine operation: 1     copyir.com If non-compatible master roll is installed in the machine.
E 46    Non-Compatible Ink Bottle (1     copyir.com
Displayed to prevent machine operation:
1     copyir.com If non-compatible ink bottle is installed in the machine.
E 47    Non-Compatible Master Roll (2     copyir.com
Displayed to prevent machine operation:
1     copyir.com If non-compatible master roll is installed in the machine.
E 48    Non-Compatible Ink Bottle (2     copyir.com
Displayed to prevent machine operation:
1     copyir.com If non-compatible ink bottle is installed in the machine.
E 50    Connect "Copy/Master" Counter
Displayed to interrupt or prevent machine operation:
1     copyir.com If the connector of the copy and master counter comes loose or if the counter is removed.
E 51    Insert Card into Key/Card Counter
Displayed to prevent the machine operation:
1     copyir.com If an operator card is not set in the Key/Card counter.
E 52    Set Drum in Place
Displayed to prevent the machine operation:
1     copyir.com If the actuator of the Drum set switch is not depressed.
E 53    Set Ink Bottle in Place
Displayed to prevent the machine operation:
1     copyir.com If the actuator of the Ink bottle switch is not depressed.
E 54    Set Leading Edge of Master Under Green Films
Displayed to prevent the machine operation:
1     copyir.com If the Master detection sensor does not detect master material (the reflected light     copyir.com.
E 55    Close Front Cover
Displayed to prevent the machine operation:
1     copyir.com If the metal plate is not attached to the Front cover set sensor.
E 56    Close Original Feed Table (Top Cover     copyir.com
Displayed to prevent the machine operation:
1     copyir.com If the safety switch is not pressed by the Original feed table (Top cover     copyir.com.
E 57    Set Master Disposal Box in Place
Displayed to prevent the machine operation:
1     copyir.com If the actuator of the Disposal box set switch is not depressed.
E 58    Close Master Loading Unit
Displayed to prevent the machine operation:
1     copyir.com If the actuator of the Master loading unit switch is not depressed.
E 59    Close ADF Unit Displayed to prevent the machine operation:
1     copyir.com If the actuator of the ADF unit set switch is not depressed.
E 60    Paper Feed Tray Emergency Stop Displayed to interrupt the machine operation:
1     copyir.com If the safety switch over or under the Paper feed tray is activated.
E 61    Drum Size Error
Displayed to prevent the machine operation:
1     copyir.com If a wrong size drum is set in the machine.
E 62    Drum Brand Error
Displayed to prevent the machine operation:
1     copyir.com If a wrong brand drum is set in the machine.
E 66    Ink Bottle / Master Holder Registration Error
Displayed to prevent the machine operation:
1     copyir.com If wrongly registered ink bottle or master holder is set in machine.
E 67    PI PCB Missing
Displayed to interrupt the machine operation:
1     copyir.com PI CPB is missing or connecotr disconnected
E 68    Bulk Sheet Feeder Power Malfunction
Displayed to interrupt the machine operation:
1     copyir.com If the Bulk sheet feeder encounters power failure.
E 69    Bulk Sheet Feeder Error
Displayed to interrupt the machine operation:
1     copyir.com If the Bulk sheet feeder malfunctions
E 71    Sorter Error - Paper jammed in Sorter
Displayed to interrupt the machine operation:
1     copyir.com If paper has jammed in the sorter.
E 72    Sorter Error - Sorter door (or cover     copyir.com is open
Displayed to prevent the machine operation:
1     copyir.com If the door (or cover     copyir.com of the sorter is open.
E 73    Sorter Error - Paper remains in Sorter
Displayed to prevent the machine operation:
1     copyir.com If the sorted sheets remain in the sort bins.
E 74    Sorter Error - Sorter bins are full
Displayed to interrupt the machine operation:
1     copyir.com If the sort bins are full of sorted sheets.
E 75    Sorter Error - Wrong paper size is selected
Displayed to prevent the machine operation:
1     copyir.com If the paper size selection on the sorter does not match with the size of the paper loaded on the Paper feed tray.
E 76    Sorter Error - Unavailable paper size
Displayed to prevent the machine operation:
1     copyir.com If the size of the paper loaded on the Paper feed tray is out of the range of paper size which can be used in the sorter.
E 79    Paper Tape has run out in Job Separator
Displayed to interrupt the machine operation:
1     copyir.com If the Tape end sensor has detected the end of a paper tape roll.

خواندن 970 دفعه
محتوای بیشتر در این بخش: « ریسو گراف gr seies ریسو گراف gr2750 »

نظر دادن

از پر شدن تمامی موارد الزامی ستاره‌دار (*) اطمینان حاصل کنید. کد HTML مجاز نیست.

نماد اعتماد

اطلاعات تماس

 آدرس: آذربایجان شرقی، مراغه، خیایان امام، روبروی داروخانه جاوید، ساختمان کپی ایران
شماره تماس: 04137252392   |    04137254200
شماره تماس: 04137253033   |   04137253034
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید.این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید|این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت داریدساعات کاری: از 8 الی 22 شب