Your browser does not support JavaScript! > ریسو گراف ra4900

   کانال تلگرام کپی ایران

(0) محصول
شنبه, 28 فروردين 1395 12:20

ریسو گراف ra4900

نوشته شده توسط
این مورد را ارزیابی کنید
(0 رای‌ها)

E 01    Main Motor Lock
Displayed to interrupt the machine operation:
1) If the Drum position A is still detected by the Position A detection sensor 2 seconds after the Main motor started     copyir.com
2) If the Drum position A hasn’t been detected by the Position A detection sensor within 5 seconds after the Main motor is started     copyir.com
E 02    Elevator Motor Lock
Displayed to interrupt the machine operation:
1) If the actuator of the Elevator upper limit sensor is not raised within 9 seconds after the Elevator motor started to raise the Paper feed tray     copyir.com
2) If the light path of the Elevator lower limit sensor is not blocked within 9 seconds after the Elevator motor started to lower the Paper feed tray     copyir.com
3) If the light path of the Elevator lower limit sensor is blocked 2 seconds after the Elevator motor started to raise the Paper feed tray     copyir.com
4) If the actuator of the Elevator upper limit sensor is still raised 2 seconds after the Elevator motor started to lower the Paper feed tray     copyir.com
E 03    Clamp Error 1
Displayed to interrupt the machine operation:
1) If the actuator of the Clamp safety switch is still depressed 4 seconds after the Clamp solenoid was activated (turned on)     copyir.com
2) If the actuator of the Clamp safety switch has not been depressed within 4 sec     copyir.com after the Clamp solenoid was released (turned off)     copyir.com
3) If the Angular magnet has not been detected by the Angular sensor (either 0° or 180°) within 8 seconds after the Clamp motor started rotating     copyir.com
4) If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation     copyir.com
E 04    Ink Overflow
Displayed to interrupt the machine operation:
1) If the Overflow sensor detects excessive ink in the Squeegee unit     copyir.com
E 05    Print Positioning Motor Lock
Displayed to interrupt the machine operation:
1) If the Vertical centering sensor status has not been changed from ON to OFF (or OFF to ON) within 12 seconds after the Print positioning motor started rotating     copyir.com
E 06    Pressure Detection Sensor Malfunction
Displayed to interrupt the machine operation:
1) If the Pressure detection sensor status has not been changed from ON to OFF (or OFF to ON) within 8 seconds after the Main motor started rotating     copyir.com
E 07    Communication error between RA and RA Digitizer
Displayed to interrupt the machine operation:
1) If a communication error has occurred between the CPU and RA digitizer     copyir.com
E 08    Communication error between RA and Interface Accessaries
Displayed to interrupt the machine operation:
1) If a communication error has occurred between the CPU and the interface accessaries     copyir.com
E 09    Communication error between RA and the Sorters
Displayed to interrupt the machine operation:
1) If a communication error has occurred between the CPU and the sorters     copyir.com
E 10    Malfunction of Trimming PCB
Displayed to interrupt the machine operation:
1) If data signals such as original size, are not output from the Trimming PCB at the start of the image scanning operation     copyir.com
E 11    Pressure Control Motor Lock
Displayed to interrupt the machine operation:
1) If the pulse from the Encoder disc on the Pressure control motor has not been detected within 100ms from the start of the Pressure control motor     copyir.com
2) If the Pressure centering sensor status has not been changed from ON to OFF (or OFF to ON) within 5 seconds from the start of the Pressure control motor     copyir.com
E 12    Machine Model Selection Error
Displayed to prevent the machine operation: The SW2 (HEX SW) selection on the System PCB is set to "Not Used" position     copyir.com
E 13    Cutter Motor Lock
Displayed to interrupt the machine operation in master-making and confidential process:
1) If master is detected by the Master positioning sensor at Drum A position after the cutting operation and besides it is still detected by the Master positioning sensor at the next Drum A position detection after the second cutting operation     copyir.com
E 14    Clamp Error 2
Displayed to interrupt the machine operation:
1) If the actuator of the Clamp safety switch is not depressed when the Clamp solenoid is not in operation     copyir.com
E 15    Flat Bed Read Pulse Motor Lock
Displayed to interrupt the machine operation:
1) If the Image scanner home position sensor does not detect the Image scanner within 18898 pulses after the Flat bed read pulse motor is activated     copyir.com
2) If the Image scanner ADF Shading sensor does not detect the Image scanner within 15748 pulses after the Flat bed read pulse motor is activated     copyir.com
3) If the Image scanner is not release from the Image scanner home position sensor within 314 pulses after the Flat bed read pulse motor is activated     copyir.com
4) If the Image scanner is not released from the Image scanner ADF Shading sensor within 314 pulses after the Flat bed read pulse motor is activated     copyir.com
E 16    Position C Sensor Malfunction
Displayed to interrupt the machine operation:
1) If the Position C sensor status has not been changed from ON to OFF (or OFF to ON) within 8 seconds from the start of the Main Motor     copyir.com
E 17    Replace Battery
Displayed to interrupt the machine operation:
1) If the Battery detection signal is OFF at either of following three cases     copyir.com <1> when the machine power is turned ON <2> when All reset button is pressed <3> at the end of machine operation     copyir.com
E 18    Sorter Error
Displayed to interrupt the machine operation:
1) If an error signal is received from the sorter     copyir.com
E 19    Thermal Pressure Motor Lock
Displayed to interrupt the machine operation:
1) If the TPH Pressure switch has not been depressed within 4 seconds after the TPH Pressure motor was activated to lower the TPH     copyir.com
2) If the TPH Pressure switch has not been released within 4 seconds after the TPH Pressure motor was activated to raise the TPH     copyir.com
E 20    Wing Motor Lock
Displayed to interrupt the machine operation:
1) If neither of the Jump wing sw1 or sw2 has been depressed within 5 seconds after the Wing motor was activated     copyir.com
2) If neither of the Jump wing sw1 or sw2 has been released within 5 seconds after the Wing motor was activated     copyir.com
E 21    Master Loading Error (onto the Drum)
Displayed to interrupt the machine operation:
1) If the Master load sensor does not detect master at the Drum C-1 position during loading of the master on the Drum     copyir.com
E 22    Master Mis-Feed
Displayed after the master has been loaded onto the Drum in the master making or confidential process:
1) If the Master positioning sensor has not detected master material within 787 pulses (536 pulses in confidential process) after the Loading pulse motor started following the master cutting operation     copyir.com Displayed to interrupt the machine operation when the Master loading button was pressed: 1) If the Master positioning sensor has not detected master material within 1260 pulses after the Loading pulse motor was turned on     copyir.com
2) If the Master positioning sensor has not detected master material within 787 pulses after the Loading pulse motor was turned on following the operation of the Cutter motor and the cut master material is removed     copyir.com
E 23    Master Cut Malfunction
Displayed to interrupt the machine operation in master-making and confidential process:
1) If master is detected by the Master positioning sensor at Drum A position after the cutting operation and besides it is not detected by the Master positioning sensor at the next Drum A position detection after the second cutting operation     copyir.com
E 24    A Cut Piece of Master Remains inside the Machine Displayed:
1) If the Master positioning sensor detects master material (the reflected light) just after the master cut operation is completed     copyir.com
E 25    Master Removal Error
Displayed after the Image scanning and Master making operations are completed or in the confidential operation:
1) If the Master removal sensor does not detect a removed master while the Drum rotates from C-1 to A position, during master removal operation     copyir.com
2) If the light path of the Master removal sensor is still blocked by a removed master when the Vertical transport motor stops     copyir.com
E 26    Removed Master Jammed at the entrance of Master disposal box     copyir.com
Displayed:
1) If the light path of the Master removal sensor is blocked at the start of master-making operation     copyir.com
E 27    No Master on Drum
Displayed to interrupt the machine operation:
1) If the Master sensor does not detect master on the drum at the Drum A position when the printing starts     copyir.com
E 31    Paper Jam in the Second Paper Feed Area
Displayed to interrupt the machine operation:
1) If the Paper sensor malfunctions     copyir.com
2) If the Paper sensor detects paper when the Pressure detection sensor detects the Pressure disc     copyir.com
3) If at the Drum A position, the Paper receiving sensor 1 does not detect paper and at the next Drum A position, the Paper sensor detects the paper     copyir.com
E 32    Paper Jam around Paper Receiving Sensor 1
Displayed to interrupt the machine operation:
1) If the Paper receiving sensor 1 detects paper when the Pressure detection sensor detects the Pressure disc     copyir.com
2) If the Paper receiving sensor 2 detects paper when the Paper receiving sensor 1 detects the next sheet of paper     copyir.com
E 33    Paper Jam in the First Paper Feed Area
Displayed to interrupt the machine operation:
1) If the Paper sensor has not detected paper while the Position A sensor detects the A position three times     copyir.com
E 34    Paper Jam under the Drum
Displayed to interrupt the machine operation:
1) If the Paper receive sensor 1 does not detect paper at the Drum A position and the Paper sensor does not detect the paper at the next Drum A position     copyir.com
E 36    Original Misfeed
Displayed to interrupt the machine operation:
1) If the actuator of the Registration sensor is not opened within 1     copyir.com35 seconds after the Original pickup motor was turned on     copyir.com
E 37    Original Jam at Entrance
Displayed to interrupt the machine operation:
1) If the Original IN sensor has not detected an original within 630 pulses after the Read pulse motor was turned on     copyir.com
E 38    Original Jam or Oversize
Displayed after the master has been loaded onto the Drum:
1) If the light path of the Original IN sensor is blocked for 14,173 pulses (FB type = 14,803) after the Read pulse motor is turned on     copyir.com
E 39    Original Jam at the Exit
Displayed after the master has been loaded onto the Drum:
1) If the Original OUT sensor has been blocked for 1,890 pulses after the Read pulse motor was turned on     copyir.com
E 45    Non-Compatible Master Roll (1)
Dispalyed to prevent the machine operation: 1) If non-compatible master roll is installed in the machine     copyir.com
E 46    Non-Compatible Ink Bottle (1)
Displayed to prevent machine operation:
1) If non-compatible ink bottle is installed in the machine     copyir.com
E 47    Non-Compatible Master Roll (2)
Displayed to prevent machine operation:
1) If non-compatible master roll is installed in the machine     copyir.com
E 48    Non-Compatible Ink Bottle (2)
Displayed to prevent machine operation:
1) If non-compatible ink bottle is installed in the machine     copyir.com
E 50    Connect "Copy/Master" Counter
Displayed to interrupt or prevent machine operation:
1) If the connector of the copy and master counter comes loose or if the counter is removed     copyir.com
E 51    Insert Card into Key/Card Counter
Displayed to prevent the machine operation:
1) If an operator card is not set in the Key/Card counter     copyir.com
E 52    Set Drum in Place
Displayed to prevent the machine operation:
1) If the actuator of the Drum set switch is not depressed     copyir.com
E 53    Set Ink Bottle in Place
Displayed to prevent the machine operation:
1) If the actuator of the Ink bottle switch is not depressed     copyir.com
E 54    Set Leading Edge of Master Under Green Films
Displayed to prevent the machine operation:
1) If the Master detection sensor does not detect master material (the reflected light)     copyir.com
E 55    Close Front Cover
Displayed to prevent the machine operation:
1) If the metal plate is not attached to the Front cover set sensor     copyir.com
E 56    Close Original Feed Table (Top Cover)
Displayed to prevent the machine operation:
1) If the safety switch is not pressed by the Original feed table (Top cover)     copyir.com
E 57    Set Master Disposal Box in Place
Displayed to prevent the machine operation:
1) If the actuator of the Disposal box set switch is not depressed     copyir.com
E 58    Close Master Loading Unit
Displayed to prevent the machine operation:
1) If the actuator of the Master loading unit switch is not depressed     copyir.com
E 59    Close ADF Unit Displayed to prevent the machine operation:
1) If the actuator of the ADF unit set switch is not depressed     copyir.com
E 60    Paper Feed Tray Emergency Stop Displayed to interrupt the machine operation:
1) If the safety switch over or under the Paper feed tray is activated     copyir.com
E 61    Drum Size Error
Displayed to prevent the machine operation:
1) If a wrong size drum is set in the machine     copyir.com
E 62    Drum Brand Error
Displayed to prevent the machine operation:
1) If a wrong brand drum is set in the machine     copyir.com
E 66    Ink Bottle / Master Holder Registration Error
Displayed to prevent the machine operation:
1) If wrongly registered ink bottle or master holder is set in machine     copyir.com
E 67    PI PCB Missing
Displayed to interrupt the machine operation:
1) PI CPB is missing or connecotr disconnected
E 68    Bulk Sheet Feeder Power Malfunction
Displayed to interrupt the machine operation:
1) If the Bulk sheet feeder encounters power failure     copyir.com
E 69    Bulk Sheet Feeder Error
Displayed to interrupt the machine operation:
1) If the Bulk sheet feeder malfunctions
E 71    Sorter Error - Paper jammed in Sorter
Displayed to interrupt the machine operation:
1) If paper has jammed in the sorter     copyir.com
E 72    Sorter Error - Sorter door (or cover) is open
Displayed to prevent the machine operation:
1) If the door (or cover) of the sorter is open     copyir.com
E 73    Sorter Error - Paper remains in Sorter
Displayed to prevent the machine operation:
1) If the sorted sheets remain in the sort bins     copyir.com
E 74    Sorter Error - Sorter bins are full
Displayed to interrupt the machine operation:
1) If the sort bins are full of sorted sheets     copyir.com
E 75    Sorter Error - Wrong paper size is selected
Displayed to prevent the machine operation:
1) If the paper size selection on the sorter does not match with the size of the paper loaded on the Paper feed tray     copyir.com
E 76    Sorter Error - Unavailable paper size
Displayed to prevent the machine operation:
1) If the size of the paper loaded on the Paper feed tray is out of the range of paper size which can be used in the sorter     copyir.com
E 79    Paper Tape has run out in Job Separator
Displayed to interrupt the machine operation:
1) If the Tape end sensor has detected the end of a paper tape roll     copyir.com

خواندن 969 دفعه
محتوای بیشتر در این بخش: « ریسو گراف ra4200 ریسو گراف ra5900 »

نظر دادن

از پر شدن تمامی موارد الزامی ستاره‌دار (*) اطمینان حاصل کنید. کد HTML مجاز نیست.

نماد اعتماد

اطلاعات تماس

 آدرس: آذربایجان شرقی، مراغه، خیایان امام، روبروی داروخانه جاوید، ساختمان کپی ایران
شماره تماس: 04137252392   |    04137254200
شماره تماس: 04137253033   |   04137253034
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید.این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید|این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت داریدساعات کاری: از 8 الی 22 شب