Your browser does not support JavaScript! > سرویس مانوئل کونیکا مینولتا

   کانال تلگرام کپی ایران

(0) محصول
سرویس مانوئل کونیکا مینولتا
سرویس مانوئل ریسو گراف

سرویس مانوئل ریسو گراف (88)

طبقه بندي هاي فرزند

چهارشنبه, 01 ارديبهشت 1395 00:55

ریسو گراف tr15309

نوشته شده توسط

C21    Master Loading Error (onto the Drum)
• If the Master sensor does not detect the master (light not reflected) during the master loading when the Drum is at 79° from the position-A     copir.com
C22    Master Misfeed
• If the Master positioning sensor does not detect the master (light not reflected) within 944 pulses after the Write pulse motor activates     copir.com
• If the light path of the Master tension plate sensor is blocked (Master tension plate is down) when the master feeding has started     copir.com
C23    Master Cut Malfunction
• If the Master positioning sensor is still detecting the master (light reflected back) when the Drum is at position-A after the cutting operation and the Master tentioning plate sensor is ON     copir.com
C25    Master Removal Error
• If the Master removal sensor does not detect the removed master (light path opened) when the Drum rotates to either 70° or 90° from the position-A during the master removal, when a master was detected on the Drum     copir.com
C26    Removed Master Jammed at the Master removal area
• If the Master removal sensor is detecting the removed master (light path blocked) even though the Drum has returned to the position-A after the master removal process     copir.com
C27    No Master on the Drum
• If the Master sensor does not find master on the Drum when the Drum is at 79° during the printing movement     copir.com
C31    Paper Jam in the Second Paper Feed Area
• If the Paper receiving sensor does not find paper when the Drum is at Position-A during the printing operation and the Paper sensor finds a paper at next Drum Position-A     copir.com
C32    Paper Jam in the Paper Receiving Area
• If the status of the Paper receiving sensor does not change from detecting paper to not detecting from one Drum Position-A to the next during printing     copir.com
C33    Paper Jam in the First Paper Feed Area
• If the Paper sensor does not detect paper at Drum angle 135° within three Drum rotations during printing     copir.com
C34    Paper Jam on the Drum
• If the Paper receiving sensor does not detect paper at one Drum Position-A and the Paper sensor detects paper at next Drum Position-A     copir.com
C37    Original Jam at Entrance
• During the Original set movement, if the Original IN sensor does not detect Original (sensor light not reflected) within 1712 pulses after the Read pulse motor activates     copir.com
• During the Original set movement, if the Original IN sensor stops detecting the Original before the Read pulse motor activates 347 pulses     copir.com
C38    Original Jam or Oversize
• During the Original scanning, if the Original IN sensor keeps detecting Original (sensor light reflected) and does not stop detecting within 4945 pulses after the Read pulse motor activates     copir.com
C41    Replace Ink Pack
• If the Ink sensor does not detect ink in the Squeegee unit within 20 seconds after the Inking motor was activated     copir.com
• If the Ink sensor does not detect ink in the Squeegee unit within 80 seconds after the Drum idling has started     copir.com
C42    Replace Master Roll
• If the black tape attached at the end of the Master roll has been detected by the Master end sensor during master making or confidential operation     copir.com
C43    Empty Disposal Box
• If the Master full detection sensor does not detect the Master compress plate during the master compressing process     copir.com
C44    Add Paper
• If the light path of the Paper detection sensor is open     copir.com
C49    Close Master Removal Unit
• If the actuator of the Master disposal unit set switch is not depressed     copir.com
C51    Insert Card into Key/Card Counter
• If an operator card is not set in the Key/Card counter     copir.com
C52    Set Drum in Place
• If the Drum set sensor does not detect the Drum     copir.com
C53    Set Ink Pack in Place
• If the Ink pack set sensor does not detect the Ink pack     copir.com
C56    Close ADF Unit
• If the ADF unit set sensor does not detect the ADF unit     copir.com
C58    Close Master Making Unit
• If the actuator of the Master making unit set switch is not depressed     copir.com
C61    Drum size error
• If Memory switch No     copir.com200 is selected to wrong machine model or wrong model Drum is set in the machine     copir.com
E01    Main Motor Lock
• If excessive current is detected 0     copir.com3 seconds consecutively after the Main motor is activated     copir.com
• If no Encoder sensor output after Main motor is activated     copir.com
E02    Elevator Motor Lock
• When the light path of the Upper limit sensor or the Lower limit sensor is not cut within 10 seconds after the Elevator motor is activated     copir.com
• If the light path of both the Upper limit and Lower limit sensors are blocked when the Elevator motor is activated     copir.com
• If excessive current is detected 0     copir.com3 seconds consecutively after the Elevator motor is activated     copir.com
E03    Clamp Motor Lock [During Clamp Motor Initial Positioning]
• If the light path of the Clamp senors both A and B are not opened within 13 seconds after after the Clamp motor is activated     copir.com [During Master Release from the Clamp Plate]
• If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated     copir.com
• If the light path of the Clamp sensor B is not opened within 12 seconds after the Clamp motor is activated     copir.com [When the Clamp Plate opens during Master Clamping]
• If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated     copir.com
• If the light path of the Clamp sensor A is not opened within 5 seconds after the Clamp motor is activated     copir.com [When the Clamp Plate closes during Master Clamping]
• If the light path of the Clamp sensor B is not opened within 5 seconds after the Clamp motor is activated     copir.com
E04    Ink Overflow
• If the Overflow sensor detects excessive ink in the Squeegee unit     copir.com
E05    Print Positioning Motor Lock
• If the Vertical centering sensor status has not been changed from ON to OFF (or OFF to ON) within 3550 ms after the Print positioning motor activated     copir.com
E06    Position-A Sensor Malfunction
• If Position-A sensor cannot be detected (or keeps detecting) even though the Main motor encoder sensor signal is making the output after the Main motor is activated     copir.com
E07    Master Compressing Motor Lock [When compressing]
• If the light path of the Master compressing sensor is not opened within 10 seconds after the Master compressing motor is activated     copir.com [When returning back]
• If the light path of the Master compressing sensor is not opened (or closed) within 1 second after the Master compressing sensor is activated     copir.com
E08    Communication Error between TR and Interface Accessaries
• If a communication error has occurred between the CPU and the interface accessaries     copir.com
E10    Shading Error
• If the Shading compensation is not made     copir.com
E13    Cutter Motor Lock
• If the Cutter position sensor is not turned OFF within 75 ms after the Cutter motor is activated     copir.com
• If the Cutter position switch is not pressed within 450 ms after the Cutter motor is activated     copir.com
E14    Master Removal Motor Lock
• If excessive current is detected 0     copir.com3 seconds consecutively after the Master removal motor is activated     copir.com
E15    Master Tension Plate Lock
• If the light path of the Master tension plate sensor is not blocked within 384 pulse rotation of the Read pulse motor rotated in the reverse direction     copir.com
• If master loading error is detected at Drum angle 79° and if the Master tension plate sensor is blocked     copir.com
E16    Inking Motor Lock
• If excessive current is detected 0     copir.com3 seconds consecutively after the Inking motor is activated     copir.com
E20    Paper Ejection Motor Lock
• If excessive current is detected 0     copir.com3 seconds consecutively after the Paper ejection motor is activated     copir.com
E50    Connect "Copy/Master" Counter
• If the connector of the Counter is not connected     copir.com
E77    No TPH code
• If the TPH code is not output to the machine     copir.com (Connector loose)
E78    Machine Model Selection Error
• If Memory switch No     copir.com200 is selected to 9~F     copir.com

چهارشنبه, 01 ارديبهشت 1395 00:52

ریسو گراف tr1510

نوشته شده توسط

C21    Master Loading Error (onto the Drum)
• If the Master sensor does not detect the master (light not reflected) during the master loading when the Drum is at 79° from the position     copir     copir.comcomA     copir.com
C22    Master Misfeed
• If the Master positioning sensor does not detect the master (light not reflected) within 944 pulses after the Write pulse motor activates     copir.com
• If the light path of the Master tension plate sensor is blocked (Master tension plate is down) when the master feeding has started     copir.com
C23    Master Cut Malfunction
• If the Master positioning sensor is still detecting the master (light reflected back) when the Drum is at position     copir     copir.comcomA after the cutting operation and the Master tentioning plate sensor is ON     copir.com
C25    Master Removal Error
• If the Master removal sensor does not detect the removed master (light path opened) when the Drum rotates to either 70° or 90° from the position     copir     copir.comcomA during the master removal, when a master was detected on the Drum     copir.com
C26    Removed Master Jammed at the Master removal area
• If the Master removal sensor is detecting the removed master (light path blocked) even though the Drum has returned to the position     copir     copir.comcomA after the master removal process     copir.com
C27    No Master on the Drum
• If the Master sensor does not find master on the Drum when the Drum is at 79° during the printing movement     copir.com
C31    Paper Jam in the Second Paper Feed Area
• If the Paper receiving sensor does not find paper when the Drum is at Position     copir     copir.comcomA during the printing operation and the Paper sensor finds a paper at next Drum Position     copir     copir.comcomA     copir.com
C32    Paper Jam in the Paper Receiving Area
• If the status of the Paper receiving sensor does not change from detecting paper to not detecting from one Drum Position     copir     copir.comcomA to the next during printing     copir.com
C33    Paper Jam in the First Paper Feed Area
• If the Paper sensor does not detect paper at Drum angle 135° within three Drum rotations during printing     copir.com
C34    Paper Jam on the Drum
• If the Paper receiving sensor does not detect paper at one Drum Position     copir     copir.comcomA and the Paper sensor detects paper at next Drum Position     copir     copir.comcomA     copir.com
C37    Original Jam at Entrance
• During the Original set movement, if the Original IN sensor does not detect Original (sensor light not reflected) within 1712 pulses after the Read pulse motor activates     copir.com
• During the Original set movement, if the Original IN sensor stops detecting the Original before the Read pulse motor activates 347 pulses     copir.com
C38    Original Jam or Oversize
• During the Original scanning, if the Original IN sensor keeps detecting Original (sensor light reflected) and does not stop detecting within 4945 pulses after the Read pulse motor activates     copir.com
C41    Replace Ink Pack
• If the Ink sensor does not detect ink in the Squeegee unit within 20 seconds after the Inking motor was activated     copir.com
• If the Ink sensor does not detect ink in the Squeegee unit within 80 seconds after the Drum idling has started     copir.com
C42    Replace Master Roll
• If the black tape attached at the end of the Master roll has been detected by the Master end sensor during master making or confidential operation     copir.com
C43    Empty Disposal Box
• If the Master full detection sensor does not detect the Master compress plate during the master compressing process     copir.com
C44    Add Paper
• If the light path of the Paper detection sensor is open     copir.com
C49    Close Master Removal Unit
• If the actuator of the Master disposal unit set switch is not depressed     copir.com
C51    Insert Card into Key/Card Counter
• If an operator card is not set in the Key/Card counter     copir.com
C52    Set Drum in Place
• If the Drum set sensor does not detect the Drum     copir.com
C53    Set Ink Pack in Place
• If the Ink pack set sensor does not detect the Ink pack     copir.com
C56    Close ADF Unit
• If the ADF unit set sensor does not detect the ADF unit     copir.com
C58    Close Master Making Unit
• If the actuator of the Master making unit set switch is not depressed     copir.com
C61    Drum size error
• If Memory switch No     copir.com200 is selected to wrong machine model or wrong model Drum is set in the machine     copir.com
E01    Main Motor Lock
• If excessive current is detected 0     copir.com3 seconds consecutively after the Main motor is activated     copir.com
• If no Encoder sensor output after Main motor is activated     copir.com
E02    Elevator Motor Lock
• When the light path of the Upper limit sensor or the Lower limit sensor is not cut within 10 seconds after the Elevator motor is activated     copir.com
• If the light path of both the Upper limit and Lower limit sensors are blocked when the Elevator motor is activated     copir.com
• If excessive current is detected 0     copir.com3 seconds consecutively after the Elevator motor is activated     copir.com
E03    Clamp Motor Lock [During Clamp Motor Initial Positioning]
• If the light path of the Clamp senors both A and B are not opened within 13 seconds after after the Clamp motor is activated     copir.com [During Master Release from the Clamp Plate]
• If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated     copir.com
• If the light path of the Clamp sensor B is not opened within 12 seconds after the Clamp motor is activated     copir.com [When the Clamp Plate opens during Master Clamping]
• If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated     copir.com
• If the light path of the Clamp sensor A is not opened within 5 seconds after the Clamp motor is activated     copir.com [When the Clamp Plate closes during Master Clamping]
• If the light path of the Clamp sensor B is not opened within 5 seconds after the Clamp motor is activated     copir.com
E04    Ink Overflow
• If the Overflow sensor detects excessive ink in the Squeegee unit     copir.com
E05    Print Positioning Motor Lock
• If the Vertical centering sensor status has not been changed from ON to OFF (or OFF to ON) within 3550 ms after the Print positioning motor activated     copir.com
E06    Position     copir     copir.comcomA Sensor Malfunction
• If Position     copir     copir.comcomA sensor cannot be detected (or keeps detecting) even though the Main motor encoder sensor signal is making the output after the Main motor is activated     copir.com
E07    Master Compressing Motor Lock [When compressing]
• If the light path of the Master compressing sensor is not opened within 10 seconds after the Master compressing motor is activated     copir.com [When returning back]
• If the light path of the Master compressing sensor is not opened (or closed) within 1 second after the Master compressing sensor is activated     copir.com
E08    Communication Error between TR and Interface Accessaries
• If a communication error has occurred between the CPU and the interface accessaries     copir.com
E10    Shading Error
• If the Shading compensation is not made     copir.com
E13    Cutter Motor Lock
• If the Cutter position sensor is not turned OFF within 75 ms after the Cutter motor is activated     copir.com
• If the Cutter position switch is not pressed within 450 ms after the Cutter motor is activated     copir.com
E14    Master Removal Motor Lock
• If excessive current is detected 0     copir.com3 seconds consecutively after the Master removal motor is activated     copir.com
E15    Master Tension Plate Lock
• If the light path of the Master tension plate sensor is not blocked within 384 pulse rotation of the Read pulse motor rotated in the reverse direction     copir.com
• If master loading error is detected at Drum angle 79° and if the Master tension plate sensor is blocked     copir.com
E16    Inking Motor Lock
• If excessive current is detected 0     copir.com3 seconds consecutively after the Inking motor is activated     copir.com
E20    Paper Ejection Motor Lock
• If excessive current is detected 0     copir.com3 seconds consecutively after the Paper ejection motor is activated     copir.com
E50    Connect "Copy/Master" Counter
• If the connector of the Counter is not connected     copir.com
E77    No TPH code
• If the TPH code is not output to the machine     copir.com (Connector loose)
E78    Machine Model Selection Error
• If Memory switch No     copir.com200 is selected to 9~F     copir.com

چهارشنبه, 01 ارديبهشت 1395 00:44

ریسو گراف tr series

نوشته شده توسط

C21    Master Loading Error (onto the Drum)
• If the Master sensor does not detect the master (light not reflected) during the master loading when the Drum is at 79° from the position     copir.comA.
C22    Master Misfeed
• If the Master positioning sensor does not detect the master (light not reflected) within 944 pulses after the Write pulse motor activates.
• If the light path of the Master tension plate sensor is blocked (Master tension plate is down) when the master feeding has started.
C23    Master Cut Malfunction
• If the Master positioning sensor is still detecting the master (light reflected back) when the Drum is at position     copir.comA after the cutting operation and the Master tentioning plate sensor is ON.
C25    Master Removal Error
• If the Master removal sensor does not detect the removed master (light path opened) when the Drum rotates to either 70° or 90° from the position     copir.comA during the master removal, when a master was detected on the Drum.
C26    Removed Master Jammed at the Master removal area
• If the Master removal sensor is detecting the removed master (light path blocked) even though the Drum has returned to the position     copir.comA after the master removal process.
C27    No Master on the Drum
• If the Master sensor does not find master on the Drum when the Drum is at 79° during the printing movement.
C31    Paper Jam in the Second Paper Feed Area
• If the Paper receiving sensor does not find paper when the Drum is at Position     copir.comA during the printing operation and the Paper sensor finds a paper at next Drum Position     copir.comA.
C32    Paper Jam in the Paper Receiving Area
• If the status of the Paper receiving sensor does not change from detecting paper to not detecting from one Drum Position     copir.comA to the next during printing.
C33    Paper Jam in the First Paper Feed Area
• If the Paper sensor does not detect paper at Drum angle 135° within three Drum rotations during printing.
C34    Paper Jam on the Drum
• If the Paper receiving sensor does not detect paper at one Drum Position     copir.comA and the Paper sensor detects paper at next Drum Position     copir.comA.
C37    Original Jam at Entrance
• During the Original set movement, if the Original IN sensor does not detect Original (sensor light not reflected) within 1712 pulses after the Read pulse motor activates.
• During the Original set movement, if the Original IN sensor stops detecting the Original before the Read pulse motor activates 347 pulses.
C38    Original Jam or Oversize
• During the Original scanning, if the Original IN sensor keeps detecting Original (sensor light reflected) and does not stop detecting within 4945 pulses after the Read pulse motor activates.
C41    Replace Ink Pack
• If the Ink sensor does not detect ink in the Squeegee unit within 20 seconds after the Inking motor was activated.
• If the Ink sensor does not detect ink in the Squeegee unit within 80 seconds after the Drum idling has started.
C42    Replace Master Roll
• If the black tape attached at the end of the Master roll has been detected by the Master end sensor during master making or confidential operation.
C43    Empty Disposal Box
• If the Master full detection sensor does not detect the Master compress plate during the master compressing process.
C44    Add Paper
• If the light path of the Paper detection sensor is open.
C49    Close Master Removal Unit
• If the actuator of the Master disposal unit set switch is not depressed.
C51    Insert Card into Key/Card Counter
• If an operator card is not set in the Key/Card counter.
C52    Set Drum in Place
• If the Drum set sensor does not detect the Drum.
C53    Set Ink Pack in Place
• If the Ink pack set sensor does not detect the Ink pack.
C56    Close ADF Unit
• If the ADF unit set sensor does not detect the ADF unit.
C58    Close Master Making Unit
• If the actuator of the Master making unit set switch is not depressed.
C61    Drum size error
• If Memory switch No.200 is selected to wrong machine model or wrong model Drum is set in the machine.
E01    Main Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Main motor is activated.
• If no Encoder sensor output after Main motor is activated.
E02    Elevator Motor Lock
• When the light path of the Upper limit sensor or the Lower limit sensor is not cut within 10 seconds after the Elevator motor is activated.
• If the light path of both the Upper limit and Lower limit sensors are blocked when the Elevator motor is activated.
• If excessive current is detected 0.3 seconds consecutively after the Elevator motor is activated.
E03    Clamp Motor Lock [During Clamp Motor Initial Positioning]
• If the light path of the Clamp senors both A and B are not opened within 13 seconds after after the Clamp motor is activated. [During Master Release from the Clamp Plate]
• If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated.
• If the light path of the Clamp sensor B is not opened within 12 seconds after the Clamp motor is activated. [When the Clamp Plate opens during Master Clamping]
• If the light path of the Clamp sensor B is not blocked within 3 seconds after the Clamp motor is activated.
• If the light path of the Clamp sensor A is not opened within 5 seconds after the Clamp motor is activated. [When the Clamp Plate closes during Master Clamping]
• If the light path of the Clamp sensor B is not opened within 5 seconds after the Clamp motor is activated.
E04    Ink Overflow
• If the Overflow sensor detects excessive ink in the Squeegee unit.
E05    Print Positioning Motor Lock
• If the Vertical centering sensor status has not been changed from ON to OFF (or OFF to ON) within 3550 ms after the Print positioning motor activated.
E06    Position     copir.comA Sensor Malfunction
• If Position     copir.comA sensor cannot be detected (or keeps detecting) even though the Main motor encoder sensor signal is making the output after the Main motor is activated.
E07    Master Compressing Motor Lock [When compressing]
• If the light path of the Master compressing sensor is not opened within 10 seconds after the Master compressing motor is activated. [When returning back]
• If the light path of the Master compressing sensor is not opened (or closed) within 1 second after the Master compressing sensor is activated.
E08    Communication Error between TR and Interface Accessaries
• If a communication error has occurred between the CPU and the interface accessaries.
E10    Shading Error
• If the Shading compensation is not made.
E13    Cutter Motor Lock
• If the Cutter position sensor is not turned OFF within 75 ms after the Cutter motor is activated.
• If the Cutter position switch is not pressed within 450 ms after the Cutter motor is activated.
E14    Master Removal Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Master removal motor is activated.
E15    Master Tension Plate Lock
• If the light path of the Master tension plate sensor is not blocked within 384 pulse rotation of the Read pulse motor rotated in the reverse direction.
• If master loading error is detected at Drum angle 79° and if the Master tension plate sensor is blocked.
E16    Inking Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Inking motor is activated.
E20    Paper Ejection Motor Lock
• If excessive current is detected 0.3 seconds consecutively after the Paper ejection motor is activated.
E50    Connect "Copy/Master" Counter
• If the connector of the Counter is not connected.
E77    No TPH code
• If the TPH code is not output to the machine. (Connector loose)
E78    Machine Model Selection Error
• If Memory switch No.200 is selected to 9~F.

چهارشنبه, 01 ارديبهشت 1395 00:41

ریسوگراف tc5100

نوشته شده توسط

E     copir.com01    M ain     copir.comM otorLock (CALL SERVICE E01)
Ifno encodersignalis delivered even aftera certain tim e period has elapsed since the m ain m otorbegan running · Ifan overcurrentflows continuouslyfor0     copir.com8 sec when the m ain m otor starts running
E     copir.com02    Elevator     copir.comM otorLock (CALL SERVIC E E02)
Ifthe upper     copir.comlim itsensordoes notcom e on even afterseven seconds has elapsed since the elevatorm otorbegan running in the ascending direction
Ifthe lower     copir.comlim itsensordoes notcom e on even afterseven seconds has elapsed since the elevatorm otorbegan running in the descending direction · Ifan overcurrentflows continuouslyfor0     copir.com8 sec when the m ain m otor starts running
E     copir.com03    Stacker     copir.comM otorLock (CALL SERVIC E E03)
Ifthe statuses ofthe stackersensorand stackerhom e sensordo not change form ore than one second following the startofoperation of the stackerm otor
E     copir.com04    C onnection I/F com m unication error(CALL SERVIC E E04)
Ifthe m achine is operated through connection to anotherm achine and an erroroccurs in com m unication with the M asterm achine or Slave machine
E     copir.com05    Postprocessing     copir.comm achine I/F com m unication error (CALL SERVIC E E05)
If a postprocessing m achine is used and an erroroccurs in com m unication with the postprocessing m achine
E     copir.com06    Stacker     copir.comarea connection error(CALL SERVIC E E06)
Ifthe poweris turned on withoutthe stackerarea connected to the connectorofthe m achine m ain unit
E     copir.com99    Maintenance C all(M AINTENANCE E99)
Ifthe m aintenance     copir.comcollation     copir.comcountvalue is greaterthan the target m aintenance collation count
E     copir.com01    M ain     copir.comM otorLock (CALL SERVICE E01)
Ifno encodersignalis delivered even aftera certain tim e period has elapsed since the m ain m otorbegan running · Ifan overcurrentflows continuouslyfor0     copir.com8 sec when the m ain m otor starts running
E     copir.com02    Elevator     copir.comM otorLock (CALL SERVIC E E02)
Ifthe upper     copir.comlim itsensordoes notcom e on even afterseven seconds has elapsed since the elevatorm otorbegan running in the ascending direction
Ifthe lower     copir.comlim itsensordoes notcom e on even afterseven seconds has elapsed since the elevatorm otorbegan running in the descending direction · Ifan overcurrentflows continuouslyfor0     copir.com8 sec when the m ain m otor starts running
E     copir.com03    Stacker     copir.comM otorLock (CALL SERVIC E E03)
Ifthe statuses ofthe stackersensorand stackerhom e sensordo not change form ore than one second following the startofoperation of the stackerm otor
E     copir.com04    C onnection I/F com m unication error(CALL SERVIC E E04)
Ifthe m achine is operated through connection to anotherm achine and an erroroccurs in com m unication with the M asterm achine or Slave machine
E     copir.com05    Postprocessing     copir.comm achine I/F com m unication error (CALL SERVIC E E05)
If a postprocessing m achine is used and an erroroccurs in com m unication with the postprocessing m achine
E     copir.com06    Stacker     copir.comarea connection error(CALL SERVIC E E06)
Ifthe poweris turned on withoutthe stackerarea connected to the connectorofthe m achine m ain unit
E     copir.com99    Maintenance C all(M AINTENANCE E99)
Ifthe m aintenance     copir.comcollation     copir.comcountvalue is greaterthan the target m aintenance collation count
E     copir.com01    M ain     copir.comM otorLock (CALL SERVICE E01)
Ifno encodersignalis delivered even aftera certain tim e period has elapsed since the m ain m otorbegan running · Ifan overcurrentflows continuouslyfor0     copir.com8 sec when the m ain m otor starts running
E     copir.com02    Elevator     copir.comM otorLock (CALL SERVIC E E02)
Ifthe upper     copir.comlim itsensordoes notcom e on even afterseven seconds has elapsed since the elevatorm otorbegan running in the ascending direction
Ifthe lower     copir.comlim itsensordoes notcom e on even afterseven seconds has elapsed since the elevatorm otorbegan running in the descending direction · Ifan overcurrentflows continuouslyfor0     copir.com8 sec when the m ain m otor starts running
E     copir.com03    Stacker     copir.comM otorLock (CALL SERVIC E E03)
Ifthe statuses ofthe stackersensorand stackerhom e sensordo not change form ore than one second following the startofoperation of the stackerm otor
E     copir.com04    C onnection I/F com m unication error(CALL SERVIC E E04)
Ifthe m achine is operated through connection to anotherm achine and an erroroccurs in com m unication with the M asterm achine or Slave machine
E     copir.com05    Postprocessing     copir.comm achine I/F com m unication error (CALL SERVIC E E05)
If a postprocessing m achine is used and an erroroccurs in com m unication with the postprocessing m achine
E     copir.com06    Stacker     copir.comarea connection error(CALL SERVIC E E06)
Ifthe poweris turned on withoutthe stackerarea connected to the connectorofthe m achine m ain unit
E     copir.com99    Maintenance C all(M AINTENANCE E99)
Ifthe m aintenance     copir.comcollation     copir.comcountvalue is greaterthan the target m aintenance collation count

چهارشنبه, 01 ارديبهشت 1395 00:23

ریسو گراف rz997

نوشته شده توسط

A01     copir     copir.comcom201    Master     copir     copir.comcompositioning sensor does not go ON even after the write pulse motor is activated during the master     copir     copir.comcompositioning, master     copir     copir.comcomcut, ormaster     copir     copir.comcomloading operation     copir.com
A01     copir     copir.comcom202    Master     copir     copir.comcompositioning sensor does not go OFF even when the write pulse motor is reversed during the master     copir     copir.comcompositioning or at start ofmaster     copir     copir.comcommaking operation     copir.com
A01     copir     copir.comcom206    Timeout error during master     copir     copir.comcommaking operation
A01     copir     copir.comcom211    Master     copir     copir.comcompositioning sensor is ON during standby     copir.com
A01     copir     copir.comcom214    Master     copir     copir.comcompositioning sensor is ON at the start of master making     copir.com
A01     copir     copir.comcom215    Faulty gate     copir     copir.comcomarray control for the write pulse motor (motor does not stop within set time)
A02     copir     copir.comcom509    Master     copir     copir.comcomloading sensor was OFF when the master was checked at a specified drum angle during the master     copir     copir.comcomloading oper201ation     copir.com
A04     copir     copir.comcom303    Master     copir     copir.comcomdisposal jam sensor was OFF at both 120 and 180 degrees drum angle     copir.com
A04     copir     copir.comcom314    Master     copir     copir.comcomdisposal error (recovery error)     copir.com
A05     copir     copir.comcom304    Master     copir     copir.comcomdisposal jam sensor was ON at the completion of the master     copir     copir.comcomdisposal operation     copir.com
A05     copir     copir.comcom312    The master     copir     copir.comcomdisposal jam sensor was ON at the start of master     copir     copir.comcommaking operation     copir.com
A05     copir     copir.comcom315    The master     copir     copir.comcomdisposal jam sensor was ON when the master disposal box was set in the machine     copir.com
A06     copir     copir.comcom403    Paper     copir     copir.comcomfeed     copir     copir.comcomtray upper or lower safety switch is OFF     copir.com
A07     copir     copir.comcom409    Paper     copir     copir.comcomejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Papermisfeed)     copir.com
A07     copir     copir.comcom412    Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed)     copir.com
A07     copir     copir.comcom413    Paper sensor was ON when the paper should have left the paper sensor (long     copir     copir.comcomlength paper mode error)     copir.com
A07     copir     copir.comcom418    The paper sensor was ON at the start of machine operation when the START button was pressed     copir.com
A07     copir     copir.comcom429    Paper feed error (recovery error)     copir.com
A07     copir     copir.comcom432    Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed     copir.com
A08     copir     copir.comcom410    Paper     copir     copir.comcomejection sensor was OFF when paper should have arrived, and the paper sensor was OFF when the machine stopped (paper jamon the print drum)     copir.com
A08     copir     copir.comcom421    Paper sensor was ON when the paper should have left the paper sensor during feeding of long paper in long     copir     copir.comcomlength paper mode (paperlonger than 555 mm)     copir.com
A08     copir     copir.comcom430    Paper jam on print drum (recovery error)     copir.com
A09     copir     copir.comcom411    Paper     copir     copir.comcomejection sensor was ON when the paper should have left the paper     copir     copir.comcomejection sensor     copir.com
A09     copir     copir.comcom417    Paper     copir     copir.comcomejection sensor was ON at the start of machine operation when the START button was pressed     copir.com
A09     copir     copir.comcom431    Paper     copir     copir.comcomejection error (recovery error)     copir.com
A10     copir     copir.comcom102    Original     copir     copir.comcomregistration     copir     copir.comcomsensor remaining jam
A10     copir     copir.comcom103    Original     copir     copir.comcomIN     copir     copir.comcomsensor remaining jam
A10     copir     copir.comcom105    Original     copir     copir.comcomregistration     copir     copir.comcomsensor non     copir     copir.comcomarrival jam
A10     copir     copir.comcom106    Original     copir     copir.comcomIN     copir     copir.comcomsensor non     copir     copir.comcomarrival jam
A10     copir     copir.comcom107    Original     copir     copir.comcomOUT     copir     copir.comcomsensor non     copir     copir.comcomarrival jam
A10     copir     copir.comcom109    An original feed error occurred, due to opening the AF     copir.com
A10     copir     copir.comcom162    No original in AF during AF master making     copir.com
A16     copir     copir.comcom525    Waiting for the master to be removed     copir.com
A17     copir     copir.comcom209    Cutter home     copir     copir.comcomposition switch is OFF at the start of master     copir     copir.comcommaking or master     copir     copir.comcomset operation     copir.com
A34     copir     copir.comcom218    Request to resetting the master     copir.com
B01     copir     copir.comcom730    Keycard counter: No card
B22     copir     copir.comcom721    With the “Tape separation” function set ON, no power is supplied to the job separator when start key is pressed     copir.com
B22     copir     copir.comcom727    After cluster     copir     copir.comcomA signal turned ON, BUSY     copir     copir.comcomsignal stayed "L" more than 7 seconds (power to job separator was turned OFF while the tape isbeing ejected     copir.com
B23     copir     copir.comcom722    With the “Tape separation” function set ON, no tape detected in the job separator when the start key is pressed     copir.com
B23     copir     copir.comcom723    No tape remains in job separator upon completion of the tape     copir     copir.comcomejection operation     copir.com
B24     copir     copir.comcom724    Tape jam detected when the start key is pressed with the “Tape separation” function set to ON     copir.com
B24     copir     copir.comcom725    Job separator tape     copir     copir.comcomjam detection signal is “H” within 1,200 milliseconds after the cluster     copir     copir.comcomA signal turns ON (tape misfeed)     copir.com
B24     copir     copir.comcom726    Job separator tape     copir     copir.comcomjam detection signal is “L” when the BUSY signal changes from “L” to “H” (or after 7 sec     copir.com at “L”) after the cluster     copir     copir.comcomAsignal goes ON (tape misfeed)     copir.com
B31     copir     copir.comcom916    Network cable is not connected when the machine is powered ON     copir.com
B32     copir     copir.comcom917    Communication error on the network     copir.com
B32     copir     copir.comcom920    Error detected by Network Interface Card (NIC)      copir     copir.comcom NAK (negative acknowledgement was received)     copir.com
B33     copir     copir.comcom931    DHCP server is not found with DHCP ON     copir.com
B34     copir     copir.comcom919    Error detected on the locally connected printer     copir.com
C01     copir     copir.comcom512    The ink sensor did not go ON even when inking was performed for the preset period     copir.com
C01     copir     copir.comcom563    Ink remaining amount is zero     copir.com
C01     copir     copir.comcom574    Inkless error was detected 5 times consecutively on one same ink bottle     copir.com
C02     copir     copir.comcom200    The master end was detected twice in succession at 10     copir     copir.comcommilliseconds intervals during master transport     copir.com
C02     copir     copir.comcom240    Master remaining amount is zero
C03     copir     copir.comcom308    Compression detection position was reached before the master     copir     copir.comcomcompression     copir     copir.comcommotor encoder     copir     copir.comcomsensor count reached the specified level,after the master compression motor turned ON in the compression direction     copir.com
C03     copir     copir.comcom313    Master removal box full detected by the master removal count     copir.com
C04     copir     copir.comcom402    Paper detection sensor is OFF (no paper on the feed tray)     copir.com
D01     copir     copir.comcom526    Print drum is not set in the machine (drum connection signal, drum safety switch, and drum     copir     copir.comcomlock sensor is OFF     copir.com
D01     copir     copir.comcom527    Print drum connection signal is OFF when the print drum was inserted in the machine     copir.com
D01     copir     copir.comcom528    Print drum safety switch is OFF when the print drum was inserted in the machine     copir.com
D01     copir     copir.comcom529    Print drum lock sensor is OFF when the print drum was inserted in the machine (time     copir     copir.comcomout: 5 seconds)     copir.com
D01     copir     copir.comcom530    Print drum connection signal does not go OFF within 5 seconds after the print drum safety switch went OFF when the print drum waspulled out     copir.com
D02     copir     copir.comcom532    Incorrect print drum is used     copir.com
D03     copir     copir.comcom533    Ink cartridge set sensor is OFF     copir.com
D04     copir     copir.comcom534    Incorrect ink cartridge is used     copir.com
D04     copir     copir.comcom560    Ink TAG is not detected on ink bottle     copir.com
D04     copir     copir.comcom561    Ink cartridge communication error (communication with the ink cartridge was interfered by noise)     copir.com
D04     copir     copir.comcom562    Wrong ink cartridge information     copir.com
D04     copir     copir.comcom564    Detected a mismatch in ink cartridge information
D05     copir     copir.comcom210    Master detection sensor is OFF (not detecting master)     copir.com
D07     copir     copir.comcom310    Disposal     copir     copir.comcombox safety switch is OFF     copir.com
D08     copir     copir.comcom224    Master making unit is not set (both the safety switch and lock sensor are OFF)     copir.com
D08     copir     copir.comcom226    Master making unit safety switch is still OFF when the master making unit is set in position     copir.com
D08     copir     copir.comcom227    Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds)     copir.com
D08     copir     copir.comcom228    Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit waspulled out of the machine     copir.com
D09     copir     copir.comcom212    Master     copir     copir.comcommaking     copir     copir.comcomunit set sensor is OFF (sensor light path is free)     copir.com
D11     copir     copir.comcom535    Front cover set switch is OFF     copir.com
D13     copir     copir.comcom9    The rear cover is opened (serviceman safety switch is OFF)     copir.com
D17     copir     copir.comcom236    Incorrect master roll     copir.com
D17     copir     copir.comcom237    Master roll undetected     copir.com
D17     copir     copir.comcom238    Master roll communication error     copir.com
D17     copir     copir.comcom239    Wrong master roll detected     copir.com
D17     copir     copir.comcom241    Detected a mismatch in master roll information     copir.com
D18     copir     copir.comcom522    Print drum ready for release (solenoid is ON)     copir.com
D19     copir     copir.comcom223    Master making unit ready for release (solenoid is ON)     copir.com
D22     copir     copir.comcom540    Error in access to the Drum PCB (unable to read from or write on the Drum PCB)     copir.com
D22     copir     copir.comcom542    Abnormal data on Drum PCB     copir.com
E01     copir     copir.comcom10    Battery voltage was less than 2     copir.com5 V when the power was switched ON (weak battery: time to replace battery)     copir.com
E02     copir     copir.comcom11    Master counter reached the value set for the maintenance call (value set by test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir     copir.comcom12    Copy counter reached the value set for the maintenance call (value by set test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir     copir.comcom22    Maintenance counter inside the print drum reached the value set for the maintenance call (value set by test mode)     copir.com [The messageappears when either the power is turned ON, the unit is reset, or when the machine operation ended     copir.com]
F01     copir     copir.comcom15    There is no master on the print drum at the start of printing     copir.com
F02     copir     copir.comcom18    Paper size does not match with the image size on the print drum at the start of printing     copir.com
F03     copir     copir.comcom16    Multi     copir     copir.comcomup was selected using custom size paper     copir.com
F05     copir     copir.comcom19    In master making, the print quantity selected is less than the minimum print quantity     copir.com
F10     copir     copir.comcom21    Paper size does not match with the size of image on the print drum when test print is selected and activated     copir.com
F21     copir     copir.comcom32    Next original is not in placed on AF for multi     copir     copir.comcomup operation     copir.com
F22     copir     copir.comcom33    Next original is not placed on flatbed for multi     copir     copir.comcomup operation     copir.com
F37     copir     copir.comcom50    Original was set on the AF with book mode selected, when master making is activated     copir.com
F50     copir     copir.comcom910    Auto     copir     copir.comcomprinter     copir     copir.comcomselection is disabled due to error on linked printer     copir.com
F54     copir     copir.comcom923    Auto     copir     copir.comcomprinter     copir     copir.comcomselection is disabled due to no paper in the linked printer     copir.com
F55     copir     copir.comcom924    Auto     copir     copir.comcomprinter     copir     copir.comcomselection is disabled while receiving print data from PC     copir.com
F58     copir     copir.comcom927    Cannot print from linked printer (Initializing NET     copir     copir.comcomC)     copir.com
H1     copir     copir.comcom566    Requesting ink color information input (Ink     copir     copir.comcomTAG related)     copir.com
H2     copir     copir.comcom567    Requesting print density information input (Ink     copir     copir.comcomTAG related)     copir.com
H3     copir     copir.comcom568    Requesting test printing print density information input (Ink     copir     copir.comcomTAG related)     copir.com
H4     copir     copir.comcom242    Requesting master     copir     copir.comcommaking density information input (Master     copir     copir.comcomTAG related)     copir.com
H5     copir     copir.comcom243    Requesting Print density information input (Master     copir     copir.comcomTAG related)     copir.com
H6     copir     copir.comcom244    Requesting test printing print density information input (Master     copir     copir.comcomTAG related)     copir.com
P01     copir     copir.comcom520    Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates     copir.com
P01     copir     copir.comcom521    B     copir     copir.comcompositioning sensor status does not change even after 3,033 pulses after the main motor activates     copir.com
P01     copir     copir.comcom524    Clamp unit is not at the home position while the print drum is in operation (except during master disposal)     copir.com
P01     copir     copir.comcom537    Print drum failed to stop at position B     copir.com (over     copir     copir.comcomrun)
P01     copir     copir.comcom538    Print drum is not locked during operation     copir.com (Print     copir     copir.comcomdrum lock position sensor: OFF)
P02     copir     copir.comcom400    Both the upper and lower limit sensors were ON at the same time     copir.com
P02     copir     copir.comcom401    Overload current was detected in the elevator motor     copir.com
P02     copir     copir.comcom404    The lower     copir     copir.comcomlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower     copir     copir.comcomlimitposition     copir.com
P02     copir     copir.comcom405    The upper     copir     copir.comcomlimit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction     copir.com
P02     copir     copir.comcom406    The upper     copir     copir.comcomlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper     copir     copir.comcomlimitposition     copir.com
P02     copir     copir.comcom407    The lower     copir     copir.comcomlimit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction     copir.com
P02     copir     copir.comcom408    The upper     copir     copir.comcomlimit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray     copir.com
P03     copir     copir.comcom500    Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement     copir.com
P03     copir     copir.comcom501    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the correct direction     copir.com
P03     copir     copir.comcom502    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction     copir.com
P03     copir     copir.comcom503    Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement     copir.com
P03     copir     copir.comcom504    At the start of Clamp plate open/close action, the the detection sequence of clamp     copir     copir.comcomsensors A & B is abnormal     copir.com
P03     copir     copir.comcom505    At the start of print drum Positon     copir     copir.comcomA compensation movement, the detection sequence of clamp     copir     copir.comcomsensors A & B is abnormal     copir.com
P03     copir     copir.comcom506    At the start of Clamp unit Home     copir     copir.comcompositioning movement, the detection sequence of clamp     copir     copir.comcomsensors A & B is abnormal     copir.com
P03     copir     copir.comcom507    Clamp sensor A is ON after the clamp release action is completed     copir.com
P03     copir     copir.comcom508    Clamp sensor A is ON after the A     copir     copir.comcomposition compensating movement is completed     copir.com
P03     copir     copir.comcom545    Clamp unit is not in the home position while the print drum is in movement (cause due to the clamp motor)     copir.com
P04     copir     copir.comcom513    The overflow sensor was ON for a set number of times in succession during the 10     copir     copir.comcommillisecond     copir     copir.comcominterval overflow     copir     copir.comcomsensor check     copir.com
P05     copir     copir.comcom603    The vertical     copir     copir.comcomcentering sensor does not switch ON even when the vertical     copir     copir.comcompositioning pulse motor activated in the image     copir     copir.comcomdown direction for5 seconds during vertical home positioning movement     copir.com
P05     copir     copir.comcom604    The vertical     copir     copir.comcomcentering sensor does not switch OFF even when the vertical     copir     copir.comcompositioning pulse motor activated in the image     copir     copir.comcomup direction for 5seconds during vertical home positioning movement     copir.com
P05     copir     copir.comcom605    Even though the vertical positioning motor stopped according to the vertical centering sensor detection, the stopping position does notcorrespond with the programmed position     copir.com (GA control error)     copir.com
P05     copir     copir.comcom612    The one     copir     copir.comcomstep     copir     copir.comcompositioning key was pressed with vertical     copir     copir.comcomprint     copir     copir.comcomposition information undefined     copir.com
P08     copir     copir.comcom951    Print job executed was not in correct RisoRinc format     copir.com
P11     copir     copir.comcom600    Print pressure HP sensor does not switch ON within 3     copir.com9 seconds after the print pressure pulse motor activated towards higher pressureduring home positioning operation     copir.com
P11     copir     copir.comcom601    Print pressure HP sensor does not switch OFF within 4     copir.com6 seconds after the print pressure pulse motor activated towards lower pressureduring home positioning operation     copir.com
P11     copir     copir.comcom602    Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping positiondoes not correspond with the programmed position     copir.com (GA control error)     copir.com
P12     copir     copir.comcom300    Overload current was detected in the master removal motor     copir.com
P12     copir     copir.comcom301    Master compression motor lock when moving compression plate up     copir.com
P12     copir     copir.comcom305    Master compression sensor does not go ON within 6     copir.com5 seconds after the master compression motor operates in the return direction     copir.com
P12     copir     copir.comcom306    Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction     copir.com
P12     copir     copir.comcom307    Master compression plate maximum position is not detected within 6     copir.com5 seconds after the master compression motor operates in thecompress direction     copir.com
P12     copir     copir.comcom309    Master     copir     copir.comcomcompression     copir     copir.comcommotor encoder sensor count did not change as the master compression motor activated in the compress directionand moved out from the home position     copir.com
P12     copir     copir.comcom316    Master     copir     copir.comcomcompression     copir     copir.comcommotor encoder sensor count did not change within 10 milliseconds after the master compression motor activated     copir.com
P13     copir     copir.comcom203    Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated     copir.com
P13     copir     copir.comcom204    Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated     copir.com
P13     copir     copir.comcom205    Master     copir     copir.comcompositioning sensor is ON when the print drum rotates through the preset angle following master cutting     copir.com
P13     copir     copir.comcom221    Both the cutter HP switch and cutter stop position switch are ON at the same time     copir.com
P13     copir     copir.comcom222    Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started     copir.com
P13     copir     copir.comcom231    Cutter HP switch does not go OFF within 500 milliseconds after the cutter moved out from the home position     copir.com
P13     copir     copir.comcom232    Cutter stop position switch does not go ON within 2 seconds after the cutting operation started     copir.com
P13     copir     copir.comcom233    Cutter stop position switch does not go OFF within 500 milliseconds after the cutter activates to move from the stop position to the homeposition     copir.com
P13     copir     copir.comcom234    Cutter HP switch does not go ON within 2 seconds after the cutter home positioning operation started     copir.com
P14     copir     copir.comcom114    Incorrect main     copir     copir.comcomunit data     copir.com
P14     copir     copir.comcom115    The scanner operation is not completed within the set time     copir.com
P14     copir     copir.comcom116    Timeout error for black shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom117    Timeout error for white shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom123    Offset adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir     copir.comcom124    Gain adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir     copir.comcom125    Offset adjustment not completed     copir.com
P14     copir     copir.comcom126    Gain adjustment not completed     copir.com
P14     copir     copir.comcom135    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir     copir.comcom136    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir     copir.comcom137    Malfunction detected during black shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom138    Malfunction detected during white shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom170    Even though the read pulse motor stopped according to the sensor detection, the stopping position does not correspond with theprogrammed position     copir.com (GA control error)     copir.com
P15     copir     copir.comcom110    ABC (auto     copir     copir.comcombase     copir     copir.comcomcontrol) timeout     copir.com The original does not move from the ABC scanning position on the AF unit     copir.com
P15     copir     copir.comcom111    Operation command was made to the AF unit without 24 volts supplied to the AF unit     copir.com
P15     copir     copir.comcom130    Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit     copir.com
P15     copir     copir.comcom131    Riso printer received an undefined command from the AF unit     copir.com
P15     copir     copir.comcom132    Riso printer detected communication sequence error from the AF unit     copir.com
P15     copir     copir.comcom133    Communication error with AF unit (ACK or NAK error)     copir.com
P15     copir     copir.comcom134    Riso printer could not send command to the AF unit within the set time     copir.com
P15     copir     copir.comcom160    AF unit detection signal went OFF while the AF unit is in operation     copir.com
P15     copir     copir.comcom4    Communication error with AF     copir     copir.comcomCPU     copir.com
P17     copir     copir.comcom20    Solenoid counter is not connected     copir.com
P18     copir     copir.comcom531    Print drum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated     copir.com
P19     copir     copir.comcom207    TPH pressure sensor does not go OFF within 2 seconds after the thermal     copir     copir.comcompressure motor activates in the decompressing direction, orduring home positioning operation     copir.com
P19     copir     copir.comcom208    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir     copir.comcompressure motor activates in the decompressing direction     copir.com
P19     copir     copir.comcom216    TPH pressure sensor does not go OFF within 500 millisecond after the thermal     copir     copir.comcompressure motor activates in the compressing direction     copir.com
P19     copir     copir.comcom217    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir     copir.comcompressure motor activates in the compressing direction     copir.com
P20     copir     copir.comcom415    Paper     copir     copir.comcomejection     copir     copir.comcomwing home sensor does not go OFF within 7,000 milliseconds after the paper ejection wing motor activates in thecounterclockwise direction from the home position     copir.com
P20     copir     copir.comcom416    Overload current was detected in the paper     copir     copir.comcomejection motor     copir.com
P20     copir     copir.comcom437    Paper     copir     copir.comcomejection encoder sensor status does not change within 10 milliseconds after the paper     copir     copir.comcomejection motor is activated     copir.com
P24     copir     copir.comcom539    Inking     copir     copir.comcommotor encoder sensor status does not change within 20 milliseconds after the inking     copir     copir.comcommotor is activated     copir.com
P25     copir     copir.comcom26    Battery voltage was below 2     copir.com3 volts (too low) when the power is turned ON     copir.com
P92     copir     copir.comcom570    EEPROM on the print drum PCB was being accessed while the print drum was in releasing action from the machine     copir.com
P93     copir     copir.comcom932    No reply from the NET     copir     copir.comcomC network interface card while accessing to the network interface card     copir.com
P93     copir     copir.comcom933    No response from NET     copir     copir.comcomC for 90 seconds during NET     copir     copir.comcomC initialization     copir.com
P94     copir     copir.comcom225    TPH code does not match with the machine code when the power is turned ON with the master     copir     copir.comcommaking unit in operating position or whenthe master     copir     copir.comcommaking unit is inserted in operating position while the power is ON     copir.com
P95     copir     copir.comcom59    Machine serial     copir     copir.comcomnumber information sent from SH     copir     copir.comcomPCB does not match with the machine serial number information in the MCTL PCB     copir.com
P96     copir     copir.comcom171    TPH resistance value not input     copir.com
P96     copir     copir.comcom172    Scanner adjustment not completed     copir.com
P96     copir     copir.comcom433    Paper size width potentiometer test     copir     copir.comcommode setting is not completed     copir.com
P96     copir     copir.comcom569    Either the print drum color information or ink category information is still not input     copir.com
P96     copir     copir.comcom613    Print pressure data missing     copir.com
P98     copir     copir.comcom119    Image processing PCB trouble     copir.com
P98     copir     copir.comcom120    Scanner communication problem     copir.com (RZ3 series only)
P98     copir     copir.comcom129    Faulty Scanner GA PCB     copir.com (RZ3 series only)
P98     copir     copir.comcom2    No reply from Mini     copir     copir.comcomRosa PCB when the machine power is turned ON even though the Rosa connection signal is ON     copir.com
P98     copir     copir.comcom245    Master transfer time     copir     copir.comcomout error during master making (Write pulse motor error)     copir.com
P98     copir     copir.comcom246    Master transfer time     copir     copir.comcomout error during master making (Load pulse motor error)     copir.com
P98     copir     copir.comcom38    Machine data on EEPROM does not match with that on the SH     copir     copir.comcomPCB
P98     copir     copir.comcom39    Improper EEPROM on the SH     copir     copir.comcomPCB     copir.com
P98     copir     copir.comcom46    The DIMM capacity does not match     copir.com
P98     copir     copir.comcom5    Hardware error     copir.com
P98     copir     copir.comcom51    Touch     copir     copir.comcompanel communication error
P98     copir     copir.comcom53    Failure in calling out the saved Memory settings (program, mode, user paper information)     copir.com
P98     copir     copir.comcom54    Failure in saving the Memory settings (program, mode, user paper information)     copir.com
P98     copir     copir.comcom55    Machine type code from SH     copir     copir.comcomPCB does not match with the machine information on the H8     copir     copir.comcomPCB     copir.com
P98     copir     copir.comcom6    FRAM checksum error     copir.com
P98     copir     copir.comcom614    Vertical print position data missing     copir.com
P98     copir     copir.comcom63    The test     copir     copir.comcommode memory data stored was outside the adjustment range     copir.com
P98     copir     copir.comcom64    An undefined command was sent in communication between SH     copir     copir.comcomPCB and MCTL PCB     copir.com
P98     copir     copir.comcom65    Communication error 01 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom67    Communication error 03 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom68    Communication error 04 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom69    Communication error 05 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom7    Mini Rosa PCB not connected     copir.com
P98     copir     copir.comcom70    Communication error 06 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom71    Communication error 07 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom72    Communication error 08 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom73    Communication error 09 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom74    Communication error 10 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom75    Communication error 11 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom76    Communication error 12 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom77    Communication error 13 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom78    Communication error 14 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom79    Communication error 15 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom80    Communication error 16 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom81    Communication error 17 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom82    Communication error 18 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom83    Communication error 19 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom84    Communication error 20 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom934    Main read/write communication error (detected by read/write side)     copir.com
P98     copir     copir.comcom935    Main read/write communication error (detected by machine side)     copir.com
P98     copir     copir.comcom937    Serial number data missing     copir.com
P98     copir     copir.comcom938    FRAM version     copir     copir.comcomdown     copir.com
P98     copir     copir.comcom947    24V     copir     copir.comcomA does not go ON (a possible burnt 24     copir     copir.comcomvolt group     copir     copir.comcomA fuse)     copir.com
P98     copir     copir.comcom948    24V     copir     copir.comcomB does not go ON (a possible burnt 24     copir     copir.comcomvolt group     copir     copir.comcomB fuse)     copir.com
P98     copir     copir.comcom949    24V     copir     copir.comcomA does not go OFF     copir.com
P98     copir     copir.comcom950    24V     copir     copir.comcomB does not fo OFF     copir.com
P98     copir     copir.comcom952    Checksum error on the ROSA flash     copir     copir.comcommemory     copir.com
P98     copir     copir.comcom953    Unsuccessful writing on the ROSA flash     copir     copir.comcommemory     copir.com
P98     copir     copir.comcom98    Machine serial number information on the SH     copir     copir.comcomPCB EEPROM does not match with that in the FRAM     copir.com
P99     copir     copir.comcom936    Software error

چهارشنبه, 01 ارديبهشت 1395 00:23

ریسو گراف rz997

نوشته شده توسط

A01     copir     copir.comcom201    Master     copir     copir.comcompositioning sensor does not go ON even after the write pulse motor is activated during the master     copir     copir.comcompositioning, master     copir     copir.comcomcut, ormaster     copir     copir.comcomloading operation     copir.com
A01     copir     copir.comcom202    Master     copir     copir.comcompositioning sensor does not go OFF even when the write pulse motor is reversed during the master     copir     copir.comcompositioning or at start ofmaster     copir     copir.comcommaking operation     copir.com
A01     copir     copir.comcom206    Timeout error during master     copir     copir.comcommaking operation
A01     copir     copir.comcom211    Master     copir     copir.comcompositioning sensor is ON during standby     copir.com
A01     copir     copir.comcom214    Master     copir     copir.comcompositioning sensor is ON at the start of master making     copir.com
A01     copir     copir.comcom215    Faulty gate     copir     copir.comcomarray control for the write pulse motor (motor does not stop within set time)
A02     copir     copir.comcom509    Master     copir     copir.comcomloading sensor was OFF when the master was checked at a specified drum angle during the master     copir     copir.comcomloading oper201ation     copir.com
A04     copir     copir.comcom303    Master     copir     copir.comcomdisposal jam sensor was OFF at both 120 and 180 degrees drum angle     copir.com
A04     copir     copir.comcom314    Master     copir     copir.comcomdisposal error (recovery error)     copir.com
A05     copir     copir.comcom304    Master     copir     copir.comcomdisposal jam sensor was ON at the completion of the master     copir     copir.comcomdisposal operation     copir.com
A05     copir     copir.comcom312    The master     copir     copir.comcomdisposal jam sensor was ON at the start of master     copir     copir.comcommaking operation     copir.com
A05     copir     copir.comcom315    The master     copir     copir.comcomdisposal jam sensor was ON when the master disposal box was set in the machine     copir.com
A06     copir     copir.comcom403    Paper     copir     copir.comcomfeed     copir     copir.comcomtray upper or lower safety switch is OFF     copir.com
A07     copir     copir.comcom409    Paper     copir     copir.comcomejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Papermisfeed)     copir.com
A07     copir     copir.comcom412    Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed)     copir.com
A07     copir     copir.comcom413    Paper sensor was ON when the paper should have left the paper sensor (long     copir     copir.comcomlength paper mode error)     copir.com
A07     copir     copir.comcom418    The paper sensor was ON at the start of machine operation when the START button was pressed     copir.com
A07     copir     copir.comcom429    Paper feed error (recovery error)     copir.com
A07     copir     copir.comcom432    Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed     copir.com
A08     copir     copir.comcom410    Paper     copir     copir.comcomejection sensor was OFF when paper should have arrived, and the paper sensor was OFF when the machine stopped (paper jamon the print drum)     copir.com
A08     copir     copir.comcom421    Paper sensor was ON when the paper should have left the paper sensor during feeding of long paper in long     copir     copir.comcomlength paper mode (paperlonger than 555 mm)     copir.com
A08     copir     copir.comcom430    Paper jam on print drum (recovery error)     copir.com
A09     copir     copir.comcom411    Paper     copir     copir.comcomejection sensor was ON when the paper should have left the paper     copir     copir.comcomejection sensor     copir.com
A09     copir     copir.comcom417    Paper     copir     copir.comcomejection sensor was ON at the start of machine operation when the START button was pressed     copir.com
A09     copir     copir.comcom431    Paper     copir     copir.comcomejection error (recovery error)     copir.com
A10     copir     copir.comcom102    Original     copir     copir.comcomregistration     copir     copir.comcomsensor remaining jam
A10     copir     copir.comcom103    Original     copir     copir.comcomIN     copir     copir.comcomsensor remaining jam
A10     copir     copir.comcom105    Original     copir     copir.comcomregistration     copir     copir.comcomsensor non     copir     copir.comcomarrival jam
A10     copir     copir.comcom106    Original     copir     copir.comcomIN     copir     copir.comcomsensor non     copir     copir.comcomarrival jam
A10     copir     copir.comcom107    Original     copir     copir.comcomOUT     copir     copir.comcomsensor non     copir     copir.comcomarrival jam
A10     copir     copir.comcom109    An original feed error occurred, due to opening the AF     copir.com
A10     copir     copir.comcom162    No original in AF during AF master making     copir.com
A16     copir     copir.comcom525    Waiting for the master to be removed     copir.com
A17     copir     copir.comcom209    Cutter home     copir     copir.comcomposition switch is OFF at the start of master     copir     copir.comcommaking or master     copir     copir.comcomset operation     copir.com
A34     copir     copir.comcom218    Request to resetting the master     copir.com
B01     copir     copir.comcom730    Keycard counter: No card
B22     copir     copir.comcom721    With the “Tape separation” function set ON, no power is supplied to the job separator when start key is pressed     copir.com
B22     copir     copir.comcom727    After cluster     copir     copir.comcomA signal turned ON, BUSY     copir     copir.comcomsignal stayed "L" more than 7 seconds (power to job separator was turned OFF while the tape isbeing ejected     copir.com
B23     copir     copir.comcom722    With the “Tape separation” function set ON, no tape detected in the job separator when the start key is pressed     copir.com
B23     copir     copir.comcom723    No tape remains in job separator upon completion of the tape     copir     copir.comcomejection operation     copir.com
B24     copir     copir.comcom724    Tape jam detected when the start key is pressed with the “Tape separation” function set to ON     copir.com
B24     copir     copir.comcom725    Job separator tape     copir     copir.comcomjam detection signal is “H” within 1,200 milliseconds after the cluster     copir     copir.comcomA signal turns ON (tape misfeed)     copir.com
B24     copir     copir.comcom726    Job separator tape     copir     copir.comcomjam detection signal is “L” when the BUSY signal changes from “L” to “H” (or after 7 sec     copir.com at “L”) after the cluster     copir     copir.comcomAsignal goes ON (tape misfeed)     copir.com
B31     copir     copir.comcom916    Network cable is not connected when the machine is powered ON     copir.com
B32     copir     copir.comcom917    Communication error on the network     copir.com
B32     copir     copir.comcom920    Error detected by Network Interface Card (NIC)      copir     copir.comcom NAK (negative acknowledgement was received)     copir.com
B33     copir     copir.comcom931    DHCP server is not found with DHCP ON     copir.com
B34     copir     copir.comcom919    Error detected on the locally connected printer     copir.com
C01     copir     copir.comcom512    The ink sensor did not go ON even when inking was performed for the preset period     copir.com
C01     copir     copir.comcom563    Ink remaining amount is zero     copir.com
C01     copir     copir.comcom574    Inkless error was detected 5 times consecutively on one same ink bottle     copir.com
C02     copir     copir.comcom200    The master end was detected twice in succession at 10     copir     copir.comcommilliseconds intervals during master transport     copir.com
C02     copir     copir.comcom240    Master remaining amount is zero
C03     copir     copir.comcom308    Compression detection position was reached before the master     copir     copir.comcomcompression     copir     copir.comcommotor encoder     copir     copir.comcomsensor count reached the specified level,after the master compression motor turned ON in the compression direction     copir.com
C03     copir     copir.comcom313    Master removal box full detected by the master removal count     copir.com
C04     copir     copir.comcom402    Paper detection sensor is OFF (no paper on the feed tray)     copir.com
D01     copir     copir.comcom526    Print drum is not set in the machine (drum connection signal, drum safety switch, and drum     copir     copir.comcomlock sensor is OFF     copir.com
D01     copir     copir.comcom527    Print drum connection signal is OFF when the print drum was inserted in the machine     copir.com
D01     copir     copir.comcom528    Print drum safety switch is OFF when the print drum was inserted in the machine     copir.com
D01     copir     copir.comcom529    Print drum lock sensor is OFF when the print drum was inserted in the machine (time     copir     copir.comcomout: 5 seconds)     copir.com
D01     copir     copir.comcom530    Print drum connection signal does not go OFF within 5 seconds after the print drum safety switch went OFF when the print drum waspulled out     copir.com
D02     copir     copir.comcom532    Incorrect print drum is used     copir.com
D03     copir     copir.comcom533    Ink cartridge set sensor is OFF     copir.com
D04     copir     copir.comcom534    Incorrect ink cartridge is used     copir.com
D04     copir     copir.comcom560    Ink TAG is not detected on ink bottle     copir.com
D04     copir     copir.comcom561    Ink cartridge communication error (communication with the ink cartridge was interfered by noise)     copir.com
D04     copir     copir.comcom562    Wrong ink cartridge information     copir.com
D04     copir     copir.comcom564    Detected a mismatch in ink cartridge information
D05     copir     copir.comcom210    Master detection sensor is OFF (not detecting master)     copir.com
D07     copir     copir.comcom310    Disposal     copir     copir.comcombox safety switch is OFF     copir.com
D08     copir     copir.comcom224    Master making unit is not set (both the safety switch and lock sensor are OFF)     copir.com
D08     copir     copir.comcom226    Master making unit safety switch is still OFF when the master making unit is set in position     copir.com
D08     copir     copir.comcom227    Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds)     copir.com
D08     copir     copir.comcom228    Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit waspulled out of the machine     copir.com
D09     copir     copir.comcom212    Master     copir     copir.comcommaking     copir     copir.comcomunit set sensor is OFF (sensor light path is free)     copir.com
D11     copir     copir.comcom535    Front cover set switch is OFF     copir.com
D13     copir     copir.comcom9    The rear cover is opened (serviceman safety switch is OFF)     copir.com
D17     copir     copir.comcom236    Incorrect master roll     copir.com
D17     copir     copir.comcom237    Master roll undetected     copir.com
D17     copir     copir.comcom238    Master roll communication error     copir.com
D17     copir     copir.comcom239    Wrong master roll detected     copir.com
D17     copir     copir.comcom241    Detected a mismatch in master roll information     copir.com
D18     copir     copir.comcom522    Print drum ready for release (solenoid is ON)     copir.com
D19     copir     copir.comcom223    Master making unit ready for release (solenoid is ON)     copir.com
D22     copir     copir.comcom540    Error in access to the Drum PCB (unable to read from or write on the Drum PCB)     copir.com
D22     copir     copir.comcom542    Abnormal data on Drum PCB     copir.com
E01     copir     copir.comcom10    Battery voltage was less than 2     copir.com5 V when the power was switched ON (weak battery: time to replace battery)     copir.com
E02     copir     copir.comcom11    Master counter reached the value set for the maintenance call (value set by test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir     copir.comcom12    Copy counter reached the value set for the maintenance call (value by set test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir     copir.comcom22    Maintenance counter inside the print drum reached the value set for the maintenance call (value set by test mode)     copir.com [The messageappears when either the power is turned ON, the unit is reset, or when the machine operation ended     copir.com]
F01     copir     copir.comcom15    There is no master on the print drum at the start of printing     copir.com
F02     copir     copir.comcom18    Paper size does not match with the image size on the print drum at the start of printing     copir.com
F03     copir     copir.comcom16    Multi     copir     copir.comcomup was selected using custom size paper     copir.com
F05     copir     copir.comcom19    In master making, the print quantity selected is less than the minimum print quantity     copir.com
F10     copir     copir.comcom21    Paper size does not match with the size of image on the print drum when test print is selected and activated     copir.com
F21     copir     copir.comcom32    Next original is not in placed on AF for multi     copir     copir.comcomup operation     copir.com
F22     copir     copir.comcom33    Next original is not placed on flatbed for multi     copir     copir.comcomup operation     copir.com
F37     copir     copir.comcom50    Original was set on the AF with book mode selected, when master making is activated     copir.com
F50     copir     copir.comcom910    Auto     copir     copir.comcomprinter     copir     copir.comcomselection is disabled due to error on linked printer     copir.com
F54     copir     copir.comcom923    Auto     copir     copir.comcomprinter     copir     copir.comcomselection is disabled due to no paper in the linked printer     copir.com
F55     copir     copir.comcom924    Auto     copir     copir.comcomprinter     copir     copir.comcomselection is disabled while receiving print data from PC     copir.com
F58     copir     copir.comcom927    Cannot print from linked printer (Initializing NET     copir     copir.comcomC)     copir.com
H1     copir     copir.comcom566    Requesting ink color information input (Ink     copir     copir.comcomTAG related)     copir.com
H2     copir     copir.comcom567    Requesting print density information input (Ink     copir     copir.comcomTAG related)     copir.com
H3     copir     copir.comcom568    Requesting test printing print density information input (Ink     copir     copir.comcomTAG related)     copir.com
H4     copir     copir.comcom242    Requesting master     copir     copir.comcommaking density information input (Master     copir     copir.comcomTAG related)     copir.com
H5     copir     copir.comcom243    Requesting Print density information input (Master     copir     copir.comcomTAG related)     copir.com
H6     copir     copir.comcom244    Requesting test printing print density information input (Master     copir     copir.comcomTAG related)     copir.com
P01     copir     copir.comcom520    Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates     copir.com
P01     copir     copir.comcom521    B     copir     copir.comcompositioning sensor status does not change even after 3,033 pulses after the main motor activates     copir.com
P01     copir     copir.comcom524    Clamp unit is not at the home position while the print drum is in operation (except during master disposal)     copir.com
P01     copir     copir.comcom537    Print drum failed to stop at position B     copir.com (over     copir     copir.comcomrun)
P01     copir     copir.comcom538    Print drum is not locked during operation     copir.com (Print     copir     copir.comcomdrum lock position sensor: OFF)
P02     copir     copir.comcom400    Both the upper and lower limit sensors were ON at the same time     copir.com
P02     copir     copir.comcom401    Overload current was detected in the elevator motor     copir.com
P02     copir     copir.comcom404    The lower     copir     copir.comcomlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower     copir     copir.comcomlimitposition     copir.com
P02     copir     copir.comcom405    The upper     copir     copir.comcomlimit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction     copir.com
P02     copir     copir.comcom406    The upper     copir     copir.comcomlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper     copir     copir.comcomlimitposition     copir.com
P02     copir     copir.comcom407    The lower     copir     copir.comcomlimit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction     copir.com
P02     copir     copir.comcom408    The upper     copir     copir.comcomlimit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray     copir.com
P03     copir     copir.comcom500    Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement     copir.com
P03     copir     copir.comcom501    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the correct direction     copir.com
P03     copir     copir.comcom502    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction     copir.com
P03     copir     copir.comcom503    Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement     copir.com
P03     copir     copir.comcom504    At the start of Clamp plate open/close action, the the detection sequence of clamp     copir     copir.comcomsensors A & B is abnormal     copir.com
P03     copir     copir.comcom505    At the start of print drum Positon     copir     copir.comcomA compensation movement, the detection sequence of clamp     copir     copir.comcomsensors A & B is abnormal     copir.com
P03     copir     copir.comcom506    At the start of Clamp unit Home     copir     copir.comcompositioning movement, the detection sequence of clamp     copir     copir.comcomsensors A & B is abnormal     copir.com
P03     copir     copir.comcom507    Clamp sensor A is ON after the clamp release action is completed     copir.com
P03     copir     copir.comcom508    Clamp sensor A is ON after the A     copir     copir.comcomposition compensating movement is completed     copir.com
P03     copir     copir.comcom545    Clamp unit is not in the home position while the print drum is in movement (cause due to the clamp motor)     copir.com
P04     copir     copir.comcom513    The overflow sensor was ON for a set number of times in succession during the 10     copir     copir.comcommillisecond     copir     copir.comcominterval overflow     copir     copir.comcomsensor check     copir.com
P05     copir     copir.comcom603    The vertical     copir     copir.comcomcentering sensor does not switch ON even when the vertical     copir     copir.comcompositioning pulse motor activated in the image     copir     copir.comcomdown direction for5 seconds during vertical home positioning movement     copir.com
P05     copir     copir.comcom604    The vertical     copir     copir.comcomcentering sensor does not switch OFF even when the vertical     copir     copir.comcompositioning pulse motor activated in the image     copir     copir.comcomup direction for 5seconds during vertical home positioning movement     copir.com
P05     copir     copir.comcom605    Even though the vertical positioning motor stopped according to the vertical centering sensor detection, the stopping position does notcorrespond with the programmed position     copir.com (GA control error)     copir.com
P05     copir     copir.comcom612    The one     copir     copir.comcomstep     copir     copir.comcompositioning key was pressed with vertical     copir     copir.comcomprint     copir     copir.comcomposition information undefined     copir.com
P08     copir     copir.comcom951    Print job executed was not in correct RisoRinc format     copir.com
P11     copir     copir.comcom600    Print pressure HP sensor does not switch ON within 3     copir.com9 seconds after the print pressure pulse motor activated towards higher pressureduring home positioning operation     copir.com
P11     copir     copir.comcom601    Print pressure HP sensor does not switch OFF within 4     copir.com6 seconds after the print pressure pulse motor activated towards lower pressureduring home positioning operation     copir.com
P11     copir     copir.comcom602    Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping positiondoes not correspond with the programmed position     copir.com (GA control error)     copir.com
P12     copir     copir.comcom300    Overload current was detected in the master removal motor     copir.com
P12     copir     copir.comcom301    Master compression motor lock when moving compression plate up     copir.com
P12     copir     copir.comcom305    Master compression sensor does not go ON within 6     copir.com5 seconds after the master compression motor operates in the return direction     copir.com
P12     copir     copir.comcom306    Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction     copir.com
P12     copir     copir.comcom307    Master compression plate maximum position is not detected within 6     copir.com5 seconds after the master compression motor operates in thecompress direction     copir.com
P12     copir     copir.comcom309    Master     copir     copir.comcomcompression     copir     copir.comcommotor encoder sensor count did not change as the master compression motor activated in the compress directionand moved out from the home position     copir.com
P12     copir     copir.comcom316    Master     copir     copir.comcomcompression     copir     copir.comcommotor encoder sensor count did not change within 10 milliseconds after the master compression motor activated     copir.com
P13     copir     copir.comcom203    Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated     copir.com
P13     copir     copir.comcom204    Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated     copir.com
P13     copir     copir.comcom205    Master     copir     copir.comcompositioning sensor is ON when the print drum rotates through the preset angle following master cutting     copir.com
P13     copir     copir.comcom221    Both the cutter HP switch and cutter stop position switch are ON at the same time     copir.com
P13     copir     copir.comcom222    Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started     copir.com
P13     copir     copir.comcom231    Cutter HP switch does not go OFF within 500 milliseconds after the cutter moved out from the home position     copir.com
P13     copir     copir.comcom232    Cutter stop position switch does not go ON within 2 seconds after the cutting operation started     copir.com
P13     copir     copir.comcom233    Cutter stop position switch does not go OFF within 500 milliseconds after the cutter activates to move from the stop position to the homeposition     copir.com
P13     copir     copir.comcom234    Cutter HP switch does not go ON within 2 seconds after the cutter home positioning operation started     copir.com
P14     copir     copir.comcom114    Incorrect main     copir     copir.comcomunit data     copir.com
P14     copir     copir.comcom115    The scanner operation is not completed within the set time     copir.com
P14     copir     copir.comcom116    Timeout error for black shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom117    Timeout error for white shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom123    Offset adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir     copir.comcom124    Gain adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir     copir.comcom125    Offset adjustment not completed     copir.com
P14     copir     copir.comcom126    Gain adjustment not completed     copir.com
P14     copir     copir.comcom135    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir     copir.comcom136    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir     copir.comcom137    Malfunction detected during black shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom138    Malfunction detected during white shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom170    Even though the read pulse motor stopped according to the sensor detection, the stopping position does not correspond with theprogrammed position     copir.com (GA control error)     copir.com
P15     copir     copir.comcom110    ABC (auto     copir     copir.comcombase     copir     copir.comcomcontrol) timeout     copir.com The original does not move from the ABC scanning position on the AF unit     copir.com
P15     copir     copir.comcom111    Operation command was made to the AF unit without 24 volts supplied to the AF unit     copir.com
P15     copir     copir.comcom130    Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit     copir.com
P15     copir     copir.comcom131    Riso printer received an undefined command from the AF unit     copir.com
P15     copir     copir.comcom132    Riso printer detected communication sequence error from the AF unit     copir.com
P15     copir     copir.comcom133    Communication error with AF unit (ACK or NAK error)     copir.com
P15     copir     copir.comcom134    Riso printer could not send command to the AF unit within the set time     copir.com
P15     copir     copir.comcom160    AF unit detection signal went OFF while the AF unit is in operation     copir.com
P15     copir     copir.comcom4    Communication error with AF     copir     copir.comcomCPU     copir.com
P17     copir     copir.comcom20    Solenoid counter is not connected     copir.com
P18     copir     copir.comcom531    Print drum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated     copir.com
P19     copir     copir.comcom207    TPH pressure sensor does not go OFF within 2 seconds after the thermal     copir     copir.comcompressure motor activates in the decompressing direction, orduring home positioning operation     copir.com
P19     copir     copir.comcom208    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir     copir.comcompressure motor activates in the decompressing direction     copir.com
P19     copir     copir.comcom216    TPH pressure sensor does not go OFF within 500 millisecond after the thermal     copir     copir.comcompressure motor activates in the compressing direction     copir.com
P19     copir     copir.comcom217    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir     copir.comcompressure motor activates in the compressing direction     copir.com
P20     copir     copir.comcom415    Paper     copir     copir.comcomejection     copir     copir.comcomwing home sensor does not go OFF within 7,000 milliseconds after the paper ejection wing motor activates in thecounterclockwise direction from the home position     copir.com
P20     copir     copir.comcom416    Overload current was detected in the paper     copir     copir.comcomejection motor     copir.com
P20     copir     copir.comcom437    Paper     copir     copir.comcomejection encoder sensor status does not change within 10 milliseconds after the paper     copir     copir.comcomejection motor is activated     copir.com
P24     copir     copir.comcom539    Inking     copir     copir.comcommotor encoder sensor status does not change within 20 milliseconds after the inking     copir     copir.comcommotor is activated     copir.com
P25     copir     copir.comcom26    Battery voltage was below 2     copir.com3 volts (too low) when the power is turned ON     copir.com
P92     copir     copir.comcom570    EEPROM on the print drum PCB was being accessed while the print drum was in releasing action from the machine     copir.com
P93     copir     copir.comcom932    No reply from the NET     copir     copir.comcomC network interface card while accessing to the network interface card     copir.com
P93     copir     copir.comcom933    No response from NET     copir     copir.comcomC for 90 seconds during NET     copir     copir.comcomC initialization     copir.com
P94     copir     copir.comcom225    TPH code does not match with the machine code when the power is turned ON with the master     copir     copir.comcommaking unit in operating position or whenthe master     copir     copir.comcommaking unit is inserted in operating position while the power is ON     copir.com
P95     copir     copir.comcom59    Machine serial     copir     copir.comcomnumber information sent from SH     copir     copir.comcomPCB does not match with the machine serial number information in the MCTL PCB     copir.com
P96     copir     copir.comcom171    TPH resistance value not input     copir.com
P96     copir     copir.comcom172    Scanner adjustment not completed     copir.com
P96     copir     copir.comcom433    Paper size width potentiometer test     copir     copir.comcommode setting is not completed     copir.com
P96     copir     copir.comcom569    Either the print drum color information or ink category information is still not input     copir.com
P96     copir     copir.comcom613    Print pressure data missing     copir.com
P98     copir     copir.comcom119    Image processing PCB trouble     copir.com
P98     copir     copir.comcom120    Scanner communication problem     copir.com (RZ3 series only)
P98     copir     copir.comcom129    Faulty Scanner GA PCB     copir.com (RZ3 series only)
P98     copir     copir.comcom2    No reply from Mini     copir     copir.comcomRosa PCB when the machine power is turned ON even though the Rosa connection signal is ON     copir.com
P98     copir     copir.comcom245    Master transfer time     copir     copir.comcomout error during master making (Write pulse motor error)     copir.com
P98     copir     copir.comcom246    Master transfer time     copir     copir.comcomout error during master making (Load pulse motor error)     copir.com
P98     copir     copir.comcom38    Machine data on EEPROM does not match with that on the SH     copir     copir.comcomPCB
P98     copir     copir.comcom39    Improper EEPROM on the SH     copir     copir.comcomPCB     copir.com
P98     copir     copir.comcom46    The DIMM capacity does not match     copir.com
P98     copir     copir.comcom5    Hardware error     copir.com
P98     copir     copir.comcom51    Touch     copir     copir.comcompanel communication error
P98     copir     copir.comcom53    Failure in calling out the saved Memory settings (program, mode, user paper information)     copir.com
P98     copir     copir.comcom54    Failure in saving the Memory settings (program, mode, user paper information)     copir.com
P98     copir     copir.comcom55    Machine type code from SH     copir     copir.comcomPCB does not match with the machine information on the H8     copir     copir.comcomPCB     copir.com
P98     copir     copir.comcom6    FRAM checksum error     copir.com
P98     copir     copir.comcom614    Vertical print position data missing     copir.com
P98     copir     copir.comcom63    The test     copir     copir.comcommode memory data stored was outside the adjustment range     copir.com
P98     copir     copir.comcom64    An undefined command was sent in communication between SH     copir     copir.comcomPCB and MCTL PCB     copir.com
P98     copir     copir.comcom65    Communication error 01 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom67    Communication error 03 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom68    Communication error 04 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom69    Communication error 05 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom7    Mini Rosa PCB not connected     copir.com
P98     copir     copir.comcom70    Communication error 06 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom71    Communication error 07 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom72    Communication error 08 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom73    Communication error 09 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom74    Communication error 10 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom75    Communication error 11 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom76    Communication error 12 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom77    Communication error 13 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom78    Communication error 14 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom79    Communication error 15 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom80    Communication error 16 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom81    Communication error 17 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom82    Communication error 18 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom83    Communication error 19 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom84    Communication error 20 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom934    Main read/write communication error (detected by read/write side)     copir.com
P98     copir     copir.comcom935    Main read/write communication error (detected by machine side)     copir.com
P98     copir     copir.comcom937    Serial number data missing     copir.com
P98     copir     copir.comcom938    FRAM version     copir     copir.comcomdown     copir.com
P98     copir     copir.comcom947    24V     copir     copir.comcomA does not go ON (a possible burnt 24     copir     copir.comcomvolt group     copir     copir.comcomA fuse)     copir.com
P98     copir     copir.comcom948    24V     copir     copir.comcomB does not go ON (a possible burnt 24     copir     copir.comcomvolt group     copir     copir.comcomB fuse)     copir.com
P98     copir     copir.comcom949    24V     copir     copir.comcomA does not go OFF     copir.com
P98     copir     copir.comcom950    24V     copir     copir.comcomB does not fo OFF     copir.com
P98     copir     copir.comcom952    Checksum error on the ROSA flash     copir     copir.comcommemory     copir.com
P98     copir     copir.comcom953    Unsuccessful writing on the ROSA flash     copir     copir.comcommemory     copir.com
P98     copir     copir.comcom98    Machine serial number information on the SH     copir     copir.comcomPCB EEPROM does not match with that in the FRAM     copir.com
P99     copir     copir.comcom936    Software error

چهارشنبه, 01 ارديبهشت 1395 00:19

ریسو گراف rz990

نوشته شده توسط

A01     copir.com201    Master     copir.compositioning sensor does not go ON even after the write pulse motor is activated during the master     copir.compositioning, master     copir.comcut, ormaster     copir.comloading operation     copir.com
A01     copir.com202    Master     copir.compositioning sensor does not go OFF even when the write pulse motor is reversed during the master     copir.compositioning or at start ofmaster     copir.commaking operation     copir.com
A01     copir.com206    Timeout error during master     copir.commaking operation
A01     copir.com211    Master     copir.compositioning sensor is ON during standby     copir.com
A01     copir.com214    Master     copir.compositioning sensor is ON at the start of master making     copir.com
A01     copir.com215    Faulty gate     copir.comarray control for the write pulse motor (motor does not stop within set time)
A02     copir.com509    Master     copir.comloading sensor was OFF when the master was checked at a specified drum angle during the master     copir.comloading oper201ation     copir.com
A04     copir.com303    Master     copir.comdisposal jam sensor was OFF at both 120 and 180 degrees drum angle     copir.com
A04     copir.com314    Master     copir.comdisposal error (recovery error)     copir.com
A05     copir.com304    Master     copir.comdisposal jam sensor was ON at the completion of the master     copir.comdisposal operation     copir.com
A05     copir.com312    The master     copir.comdisposal jam sensor was ON at the start of master     copir.commaking operation     copir.com
A05     copir.com315    The master     copir.comdisposal jam sensor was ON when the master disposal box was set in the machine     copir.com
A06     copir.com403    Paper     copir.comfeed     copir.comtray upper or lower safety switch is OFF     copir.com
A07     copir.com409    Paper     copir.comejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Papermisfeed)     copir.com
A07     copir.com412    Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed)     copir.com
A07     copir.com413    Paper sensor was ON when the paper should have left the paper sensor (long     copir.comlength paper mode error)     copir.com
A07     copir.com418    The paper sensor was ON at the start of machine operation when the START button was pressed     copir.com
A07     copir.com429    Paper feed error (recovery error)     copir.com
A07     copir.com432    Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed     copir.com
A08     copir.com410    Paper     copir.comejection sensor was OFF when paper should have arrived, and the paper sensor was OFF when the machine stopped (paper jamon the print drum)     copir.com
A08     copir.com421    Paper sensor was ON when the paper should have left the paper sensor during feeding of long paper in long     copir.comlength paper mode (paperlonger than 555 mm)     copir.com
A08     copir.com430    Paper jam on print drum (recovery error)     copir.com
A09     copir.com411    Paper     copir.comejection sensor was ON when the paper should have left the paper     copir.comejection sensor     copir.com
A09     copir.com417    Paper     copir.comejection sensor was ON at the start of machine operation when the START button was pressed     copir.com
A09     copir.com431    Paper     copir.comejection error (recovery error)     copir.com
A10     copir.com102    Original     copir.comregistration     copir.comsensor remaining jam
A10     copir.com103    Original     copir.comIN     copir.comsensor remaining jam
A10     copir.com105    Original     copir.comregistration     copir.comsensor non     copir.comarrival jam
A10     copir.com106    Original     copir.comIN     copir.comsensor non     copir.comarrival jam
A10     copir.com107    Original     copir.comOUT     copir.comsensor non     copir.comarrival jam
A10     copir.com109    An original feed error occurred, due to opening the AF     copir.com
A10     copir.com162    No original in AF during AF master making     copir.com
A16     copir.com525    Waiting for the master to be removed     copir.com
A17     copir.com209    Cutter home     copir.composition switch is OFF at the start of master     copir.commaking or master     copir.comset operation     copir.com
A34     copir.com218    Request to resetting the master     copir.com
B01     copir.com730    Keycard counter: No card
B22     copir.com721    With the “Tape separation” function set ON, no power is supplied to the job separator when start key is pressed     copir.com
B22     copir.com727    After cluster     copir.comA signal turned ON, BUSY     copir.comsignal stayed "L" more than 7 seconds (power to job separator was turned OFF while the tape isbeing ejected     copir.com
B23     copir.com722    With the “Tape separation” function set ON, no tape detected in the job separator when the start key is pressed     copir.com
B23     copir.com723    No tape remains in job separator upon completion of the tape     copir.comejection operation     copir.com
B24     copir.com724    Tape jam detected when the start key is pressed with the “Tape separation” function set to ON     copir.com
B24     copir.com725    Job separator tape     copir.comjam detection signal is “H” within 1,200 milliseconds after the cluster     copir.comA signal turns ON (tape misfeed)     copir.com
B24     copir.com726    Job separator tape     copir.comjam detection signal is “L” when the BUSY signal changes from “L” to “H” (or after 7 sec     copir.com at “L”) after the cluster     copir.comAsignal goes ON (tape misfeed)     copir.com
B31     copir.com916    Network cable is not connected when the machine is powered ON     copir.com
B32     copir.com917    Communication error on the network     copir.com
B32     copir.com920    Error detected by Network Interface Card (NIC)      copir.com NAK (negative acknowledgement was received)     copir.com
B33     copir.com931    DHCP server is not found with DHCP ON     copir.com
B34     copir.com919    Error detected on the locally connected printer     copir.com
C01     copir.com512    The ink sensor did not go ON even when inking was performed for the preset period     copir.com
C01     copir.com563    Ink remaining amount is zero     copir.com
C01     copir.com574    Inkless error was detected 5 times consecutively on one same ink bottle     copir.com
C02     copir.com200    The master end was detected twice in succession at 10     copir.commilliseconds intervals during master transport     copir.com
C02     copir.com240    Master remaining amount is zero
C03     copir.com308    Compression detection position was reached before the master     copir.comcompression     copir.commotor encoder     copir.comsensor count reached the specified level,after the master compression motor turned ON in the compression direction     copir.com
C03     copir.com313    Master removal box full detected by the master removal count     copir.com
C04     copir.com402    Paper detection sensor is OFF (no paper on the feed tray)     copir.com
D01     copir.com526    Print drum is not set in the machine (drum connection signal, drum safety switch, and drum     copir.comlock sensor is OFF     copir.com
D01     copir.com527    Print drum connection signal is OFF when the print drum was inserted in the machine     copir.com
D01     copir.com528    Print drum safety switch is OFF when the print drum was inserted in the machine     copir.com
D01     copir.com529    Print drum lock sensor is OFF when the print drum was inserted in the machine (time     copir.comout: 5 seconds)     copir.com
D01     copir.com530    Print drum connection signal does not go OFF within 5 seconds after the print drum safety switch went OFF when the print drum waspulled out     copir.com
D02     copir.com532    Incorrect print drum is used     copir.com
D03     copir.com533    Ink cartridge set sensor is OFF     copir.com
D04     copir.com534    Incorrect ink cartridge is used     copir.com
D04     copir.com560    Ink TAG is not detected on ink bottle     copir.com
D04     copir.com561    Ink cartridge communication error (communication with the ink cartridge was interfered by noise)     copir.com
D04     copir.com562    Wrong ink cartridge information     copir.com
D04     copir.com564    Detected a mismatch in ink cartridge information
D05     copir.com210    Master detection sensor is OFF (not detecting master)     copir.com
D07     copir.com310    Disposal     copir.combox safety switch is OFF     copir.com
D08     copir.com224    Master making unit is not set (both the safety switch and lock sensor are OFF)     copir.com
D08     copir.com226    Master making unit safety switch is still OFF when the master making unit is set in position     copir.com
D08     copir.com227    Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds)     copir.com
D08     copir.com228    Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit waspulled out of the machine     copir.com
D09     copir.com212    Master     copir.commaking     copir.comunit set sensor is OFF (sensor light path is free)     copir.com
D11     copir.com535    Front cover set switch is OFF     copir.com
D13     copir.com9    The rear cover is opened (serviceman safety switch is OFF)     copir.com
D17     copir.com236    Incorrect master roll     copir.com
D17     copir.com237    Master roll undetected     copir.com
D17     copir.com238    Master roll communication error     copir.com
D17     copir.com239    Wrong master roll detected     copir.com
D17     copir.com241    Detected a mismatch in master roll information     copir.com
D18     copir.com522    Print drum ready for release (solenoid is ON)     copir.com
D19     copir.com223    Master making unit ready for release (solenoid is ON)     copir.com
D22     copir.com540    Error in access to the Drum PCB (unable to read from or write on the Drum PCB)     copir.com
D22     copir.com542    Abnormal data on Drum PCB     copir.com
E01     copir.com10    Battery voltage was less than 2     copir.com5 V when the power was switched ON (weak battery: time to replace battery)     copir.com
E02     copir.com11    Master counter reached the value set for the maintenance call (value set by test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir.com12    Copy counter reached the value set for the maintenance call (value by set test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir.com22    Maintenance counter inside the print drum reached the value set for the maintenance call (value set by test mode)     copir.com [The messageappears when either the power is turned ON, the unit is reset, or when the machine operation ended     copir.com]
F01     copir.com15    There is no master on the print drum at the start of printing     copir.com
F02     copir.com18    Paper size does not match with the image size on the print drum at the start of printing     copir.com
F03     copir.com16    Multi     copir.comup was selected using custom size paper     copir.com
F05     copir.com19    In master making, the print quantity selected is less than the minimum print quantity     copir.com
F10     copir.com21    Paper size does not match with the size of image on the print drum when test print is selected and activated     copir.com
F21     copir.com32    Next original is not in placed on AF for multi     copir.comup operation     copir.com
F22     copir.com33    Next original is not placed on flatbed for multi     copir.comup operation     copir.com
F37     copir.com50    Original was set on the AF with book mode selected, when master making is activated     copir.com
F50     copir.com910    Auto     copir.comprinter     copir.comselection is disabled due to error on linked printer     copir.com
F54     copir.com923    Auto     copir.comprinter     copir.comselection is disabled due to no paper in the linked printer     copir.com
F55     copir.com924    Auto     copir.comprinter     copir.comselection is disabled while receiving print data from PC     copir.com
F58     copir.com927    Cannot print from linked printer (Initializing NET     copir.comC)     copir.com
H1     copir.com566    Requesting ink color information input (Ink     copir.comTAG related)     copir.com
H2     copir.com567    Requesting print density information input (Ink     copir.comTAG related)     copir.com
H3     copir.com568    Requesting test printing print density information input (Ink     copir.comTAG related)     copir.com
H4     copir.com242    Requesting master     copir.commaking density information input (Master     copir.comTAG related)     copir.com
H5     copir.com243    Requesting Print density information input (Master     copir.comTAG related)     copir.com
H6     copir.com244    Requesting test printing print density information input (Master     copir.comTAG related)     copir.com
P01     copir.com520    Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates     copir.com
P01     copir.com521    B     copir.compositioning sensor status does not change even after 3,033 pulses after the main motor activates     copir.com
P01     copir.com524    Clamp unit is not at the home position while the print drum is in operation (except during master disposal)     copir.com
P01     copir.com537    Print drum failed to stop at position B     copir.com (over     copir.comrun)
P01     copir.com538    Print drum is not locked during operation     copir.com (Print     copir.comdrum lock position sensor: OFF)
P02     copir.com400    Both the upper and lower limit sensors were ON at the same time     copir.com
P02     copir.com401    Overload current was detected in the elevator motor     copir.com
P02     copir.com404    The lower     copir.comlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower     copir.comlimitposition     copir.com
P02     copir.com405    The upper     copir.comlimit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction     copir.com
P02     copir.com406    The upper     copir.comlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper     copir.comlimitposition     copir.com
P02     copir.com407    The lower     copir.comlimit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction     copir.com
P02     copir.com408    The upper     copir.comlimit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray     copir.com
P03     copir.com500    Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement     copir.com
P03     copir.com501    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the correct direction     copir.com
P03     copir.com502    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction     copir.com
P03     copir.com503    Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement     copir.com
P03     copir.com504    At the start of Clamp plate open/close action, the the detection sequence of clamp     copir.comsensors A & B is abnormal     copir.com
P03     copir.com505    At the start of print drum Positon     copir.comA compensation movement, the detection sequence of clamp     copir.comsensors A & B is abnormal     copir.com
P03     copir.com506    At the start of Clamp unit Home     copir.compositioning movement, the detection sequence of clamp     copir.comsensors A & B is abnormal     copir.com
P03     copir.com507    Clamp sensor A is ON after the clamp release action is completed     copir.com
P03     copir.com508    Clamp sensor A is ON after the A     copir.composition compensating movement is completed     copir.com
P03     copir.com545    Clamp unit is not in the home position while the print drum is in movement (cause due to the clamp motor)     copir.com
P04     copir.com513    The overflow sensor was ON for a set number of times in succession during the 10     copir.commillisecond     copir.cominterval overflow     copir.comsensor check     copir.com
P05     copir.com603    The vertical     copir.comcentering sensor does not switch ON even when the vertical     copir.compositioning pulse motor activated in the image     copir.comdown direction for5 seconds during vertical home positioning movement     copir.com
P05     copir.com604    The vertical     copir.comcentering sensor does not switch OFF even when the vertical     copir.compositioning pulse motor activated in the image     copir.comup direction for 5seconds during vertical home positioning movement     copir.com
P05     copir.com605    Even though the vertical positioning motor stopped according to the vertical centering sensor detection, the stopping position does notcorrespond with the programmed position     copir.com (GA control error)     copir.com
P05     copir.com612    The one     copir.comstep     copir.compositioning key was pressed with vertical     copir.comprint     copir.composition information undefined     copir.com
P08     copir.com951    Print job executed was not in correct RisoRinc format     copir.com
P11     copir.com600    Print pressure HP sensor does not switch ON within 3     copir.com9 seconds after the print pressure pulse motor activated towards higher pressureduring home positioning operation     copir.com
P11     copir.com601    Print pressure HP sensor does not switch OFF within 4     copir.com6 seconds after the print pressure pulse motor activated towards lower pressureduring home positioning operation     copir.com
P11     copir.com602    Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping positiondoes not correspond with the programmed position     copir.com (GA control error)     copir.com
P12     copir.com300    Overload current was detected in the master removal motor     copir.com
P12     copir.com301    Master compression motor lock when moving compression plate up     copir.com
P12     copir.com305    Master compression sensor does not go ON within 6     copir.com5 seconds after the master compression motor operates in the return direction     copir.com
P12     copir.com306    Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction     copir.com
P12     copir.com307    Master compression plate maximum position is not detected within 6     copir.com5 seconds after the master compression motor operates in thecompress direction     copir.com
P12     copir.com309    Master     copir.comcompression     copir.commotor encoder sensor count did not change as the master compression motor activated in the compress directionand moved out from the home position     copir.com
P12     copir.com316    Master     copir.comcompression     copir.commotor encoder sensor count did not change within 10 milliseconds after the master compression motor activated     copir.com
P13     copir.com203    Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated     copir.com
P13     copir.com204    Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated     copir.com
P13     copir.com205    Master     copir.compositioning sensor is ON when the print drum rotates through the preset angle following master cutting     copir.com
P13     copir.com221    Both the cutter HP switch and cutter stop position switch are ON at the same time     copir.com
P13     copir.com222    Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started     copir.com
P13     copir.com231    Cutter HP switch does not go OFF within 500 milliseconds after the cutter moved out from the home position     copir.com
P13     copir.com232    Cutter stop position switch does not go ON within 2 seconds after the cutting operation started     copir.com
P13     copir.com233    Cutter stop position switch does not go OFF within 500 milliseconds after the cutter activates to move from the stop position to the homeposition     copir.com
P13     copir.com234    Cutter HP switch does not go ON within 2 seconds after the cutter home positioning operation started     copir.com
P14     copir.com114    Incorrect main     copir.comunit data     copir.com
P14     copir.com115    The scanner operation is not completed within the set time     copir.com
P14     copir.com116    Timeout error for black shading compensation     copir.com (RZ3 series only)
P14     copir.com117    Timeout error for white shading compensation     copir.com (RZ3 series only)
P14     copir.com123    Offset adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir.com124    Gain adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir.com125    Offset adjustment not completed     copir.com
P14     copir.com126    Gain adjustment not completed     copir.com
P14     copir.com135    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir.com136    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir.com137    Malfunction detected during black shading compensation     copir.com (RZ3 series only)
P14     copir.com138    Malfunction detected during white shading compensation     copir.com (RZ3 series only)
P14     copir.com170    Even though the read pulse motor stopped according to the sensor detection, the stopping position does not correspond with theprogrammed position     copir.com (GA control error)     copir.com
P15     copir.com110    ABC (auto     copir.combase     copir.comcontrol) timeout     copir.com The original does not move from the ABC scanning position on the AF unit     copir.com
P15     copir.com111    Operation command was made to the AF unit without 24 volts supplied to the AF unit     copir.com
P15     copir.com130    Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit     copir.com
P15     copir.com131    Riso printer received an undefined command from the AF unit     copir.com
P15     copir.com132    Riso printer detected communication sequence error from the AF unit     copir.com
P15     copir.com133    Communication error with AF unit (ACK or NAK error)     copir.com
P15     copir.com134    Riso printer could not send command to the AF unit within the set time     copir.com
P15     copir.com160    AF unit detection signal went OFF while the AF unit is in operation     copir.com
P15     copir.com4    Communication error with AF     copir.comCPU     copir.com
P17     copir.com20    Solenoid counter is not connected     copir.com
P18     copir.com531    Print drum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated     copir.com
P19     copir.com207    TPH pressure sensor does not go OFF within 2 seconds after the thermal     copir.compressure motor activates in the decompressing direction, orduring home positioning operation     copir.com
P19     copir.com208    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir.compressure motor activates in the decompressing direction     copir.com
P19     copir.com216    TPH pressure sensor does not go OFF within 500 millisecond after the thermal     copir.compressure motor activates in the compressing direction     copir.com
P19     copir.com217    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir.compressure motor activates in the compressing direction     copir.com
P20     copir.com415    Paper     copir.comejection     copir.comwing home sensor does not go OFF within 7,000 milliseconds after the paper ejection wing motor activates in thecounterclockwise direction from the home position     copir.com
P20     copir.com416    Overload current was detected in the paper     copir.comejection motor     copir.com
P20     copir.com437    Paper     copir.comejection encoder sensor status does not change within 10 milliseconds after the paper     copir.comejection motor is activated     copir.com
P24     copir.com539    Inking     copir.commotor encoder sensor status does not change within 20 milliseconds after the inking     copir.commotor is activated     copir.com
P25     copir.com26    Battery voltage was below 2     copir.com3 volts (too low) when the power is turned ON     copir.com
P92     copir.com570    EEPROM on the print drum PCB was being accessed while the print drum was in releasing action from the machine     copir.com
P93     copir.com932    No reply from the NET     copir.comC network interface card while accessing to the network interface card     copir.com
P93     copir.com933    No response from NET     copir.comC for 90 seconds during NET     copir.comC initialization     copir.com
P94     copir.com225    TPH code does not match with the machine code when the power is turned ON with the master     copir.commaking unit in operating position or whenthe master     copir.commaking unit is inserted in operating position while the power is ON     copir.com
P95     copir.com59    Machine serial     copir.comnumber information sent from SH     copir.comPCB does not match with the machine serial number information in the MCTL PCB     copir.com
P96     copir.com171    TPH resistance value not input     copir.com
P96     copir.com172    Scanner adjustment not completed     copir.com
P96     copir.com433    Paper size width potentiometer test     copir.commode setting is not completed     copir.com
P96     copir.com569    Either the print drum color information or ink category information is still not input     copir.com
P96     copir.com613    Print pressure data missing     copir.com
P98     copir.com119    Image processing PCB trouble     copir.com
P98     copir.com120    Scanner communication problem     copir.com (RZ3 series only)
P98     copir.com129    Faulty Scanner GA PCB     copir.com (RZ3 series only)
P98     copir.com2    No reply from Mini     copir.comRosa PCB when the machine power is turned ON even though the Rosa connection signal is ON     copir.com
P98     copir.com245    Master transfer time     copir.comout error during master making (Write pulse motor error)     copir.com
P98     copir.com246    Master transfer time     copir.comout error during master making (Load pulse motor error)     copir.com
P98     copir.com38    Machine data on EEPROM does not match with that on the SH     copir.comPCB
P98     copir.com39    Improper EEPROM on the SH     copir.comPCB     copir.com
P98     copir.com46    The DIMM capacity does not match     copir.com
P98     copir.com5    Hardware error     copir.com
P98     copir.com51    Touch     copir.companel communication error
P98     copir.com53    Failure in calling out the saved Memory settings (program, mode, user paper information)     copir.com
P98     copir.com54    Failure in saving the Memory settings (program, mode, user paper information)     copir.com
P98     copir.com55    Machine type code from SH     copir.comPCB does not match with the machine information on the H8     copir.comPCB     copir.com
P98     copir.com6    FRAM checksum error     copir.com
P98     copir.com614    Vertical print position data missing     copir.com
P98     copir.com63    The test     copir.commode memory data stored was outside the adjustment range     copir.com
P98     copir.com64    An undefined command was sent in communication between SH     copir.comPCB and MCTL PCB     copir.com
P98     copir.com65    Communication error 01 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com67    Communication error 03 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com68    Communication error 04 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com69    Communication error 05 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com7    Mini Rosa PCB not connected     copir.com
P98     copir.com70    Communication error 06 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com71    Communication error 07 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com72    Communication error 08 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com73    Communication error 09 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com74    Communication error 10 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com75    Communication error 11 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com76    Communication error 12 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com77    Communication error 13 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com78    Communication error 14 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com79    Communication error 15 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com80    Communication error 16 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com81    Communication error 17 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com82    Communication error 18 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com83    Communication error 19 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com84    Communication error 20 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com934    Main read/write communication error (detected by read/write side)     copir.com
P98     copir.com935    Main read/write communication error (detected by machine side)     copir.com
P98     copir.com937    Serial number data missing     copir.com
P98     copir.com938    FRAM version     copir.comdown     copir.com
P98     copir.com947    24V     copir.comA does not go ON (a possible burnt 24     copir.comvolt group     copir.comA fuse)     copir.com
P98     copir.com948    24V     copir.comB does not go ON (a possible burnt 24     copir.comvolt group     copir.comB fuse)     copir.com
P98     copir.com949    24V     copir.comA does not go OFF     copir.com
P98     copir.com950    24V     copir.comB does not fo OFF     copir.com
P98     copir.com952    Checksum error on the ROSA flash     copir.commemory     copir.com
P98     copir.com953    Unsuccessful writing on the ROSA flash     copir.commemory     copir.com
P98     copir.com98    Machine serial number information on the SH     copir.comPCB EEPROM does not match with that in the FRAM     copir.com
P99     copir.com936    Software error

چهارشنبه, 01 ارديبهشت 1395 00:19

ریسو گراف rz990

نوشته شده توسط

A01     copir.com201    Master     copir.compositioning sensor does not go ON even after the write pulse motor is activated during the master     copir.compositioning, master     copir.comcut, ormaster     copir.comloading operation     copir.com
A01     copir.com202    Master     copir.compositioning sensor does not go OFF even when the write pulse motor is reversed during the master     copir.compositioning or at start ofmaster     copir.commaking operation     copir.com
A01     copir.com206    Timeout error during master     copir.commaking operation
A01     copir.com211    Master     copir.compositioning sensor is ON during standby     copir.com
A01     copir.com214    Master     copir.compositioning sensor is ON at the start of master making     copir.com
A01     copir.com215    Faulty gate     copir.comarray control for the write pulse motor (motor does not stop within set time)
A02     copir.com509    Master     copir.comloading sensor was OFF when the master was checked at a specified drum angle during the master     copir.comloading oper201ation     copir.com
A04     copir.com303    Master     copir.comdisposal jam sensor was OFF at both 120 and 180 degrees drum angle     copir.com
A04     copir.com314    Master     copir.comdisposal error (recovery error)     copir.com
A05     copir.com304    Master     copir.comdisposal jam sensor was ON at the completion of the master     copir.comdisposal operation     copir.com
A05     copir.com312    The master     copir.comdisposal jam sensor was ON at the start of master     copir.commaking operation     copir.com
A05     copir.com315    The master     copir.comdisposal jam sensor was ON when the master disposal box was set in the machine     copir.com
A06     copir.com403    Paper     copir.comfeed     copir.comtray upper or lower safety switch is OFF     copir.com
A07     copir.com409    Paper     copir.comejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Papermisfeed)     copir.com
A07     copir.com412    Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed)     copir.com
A07     copir.com413    Paper sensor was ON when the paper should have left the paper sensor (long     copir.comlength paper mode error)     copir.com
A07     copir.com418    The paper sensor was ON at the start of machine operation when the START button was pressed     copir.com
A07     copir.com429    Paper feed error (recovery error)     copir.com
A07     copir.com432    Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed     copir.com
A08     copir.com410    Paper     copir.comejection sensor was OFF when paper should have arrived, and the paper sensor was OFF when the machine stopped (paper jamon the print drum)     copir.com
A08     copir.com421    Paper sensor was ON when the paper should have left the paper sensor during feeding of long paper in long     copir.comlength paper mode (paperlonger than 555 mm)     copir.com
A08     copir.com430    Paper jam on print drum (recovery error)     copir.com
A09     copir.com411    Paper     copir.comejection sensor was ON when the paper should have left the paper     copir.comejection sensor     copir.com
A09     copir.com417    Paper     copir.comejection sensor was ON at the start of machine operation when the START button was pressed     copir.com
A09     copir.com431    Paper     copir.comejection error (recovery error)     copir.com
A10     copir.com102    Original     copir.comregistration     copir.comsensor remaining jam
A10     copir.com103    Original     copir.comIN     copir.comsensor remaining jam
A10     copir.com105    Original     copir.comregistration     copir.comsensor non     copir.comarrival jam
A10     copir.com106    Original     copir.comIN     copir.comsensor non     copir.comarrival jam
A10     copir.com107    Original     copir.comOUT     copir.comsensor non     copir.comarrival jam
A10     copir.com109    An original feed error occurred, due to opening the AF     copir.com
A10     copir.com162    No original in AF during AF master making     copir.com
A16     copir.com525    Waiting for the master to be removed     copir.com
A17     copir.com209    Cutter home     copir.composition switch is OFF at the start of master     copir.commaking or master     copir.comset operation     copir.com
A34     copir.com218    Request to resetting the master     copir.com
B01     copir.com730    Keycard counter: No card
B22     copir.com721    With the “Tape separation” function set ON, no power is supplied to the job separator when start key is pressed     copir.com
B22     copir.com727    After cluster     copir.comA signal turned ON, BUSY     copir.comsignal stayed "L" more than 7 seconds (power to job separator was turned OFF while the tape isbeing ejected     copir.com
B23     copir.com722    With the “Tape separation” function set ON, no tape detected in the job separator when the start key is pressed     copir.com
B23     copir.com723    No tape remains in job separator upon completion of the tape     copir.comejection operation     copir.com
B24     copir.com724    Tape jam detected when the start key is pressed with the “Tape separation” function set to ON     copir.com
B24     copir.com725    Job separator tape     copir.comjam detection signal is “H” within 1,200 milliseconds after the cluster     copir.comA signal turns ON (tape misfeed)     copir.com
B24     copir.com726    Job separator tape     copir.comjam detection signal is “L” when the BUSY signal changes from “L” to “H” (or after 7 sec     copir.com at “L”) after the cluster     copir.comAsignal goes ON (tape misfeed)     copir.com
B31     copir.com916    Network cable is not connected when the machine is powered ON     copir.com
B32     copir.com917    Communication error on the network     copir.com
B32     copir.com920    Error detected by Network Interface Card (NIC)      copir.com NAK (negative acknowledgement was received)     copir.com
B33     copir.com931    DHCP server is not found with DHCP ON     copir.com
B34     copir.com919    Error detected on the locally connected printer     copir.com
C01     copir.com512    The ink sensor did not go ON even when inking was performed for the preset period     copir.com
C01     copir.com563    Ink remaining amount is zero     copir.com
C01     copir.com574    Inkless error was detected 5 times consecutively on one same ink bottle     copir.com
C02     copir.com200    The master end was detected twice in succession at 10     copir.commilliseconds intervals during master transport     copir.com
C02     copir.com240    Master remaining amount is zero
C03     copir.com308    Compression detection position was reached before the master     copir.comcompression     copir.commotor encoder     copir.comsensor count reached the specified level,after the master compression motor turned ON in the compression direction     copir.com
C03     copir.com313    Master removal box full detected by the master removal count     copir.com
C04     copir.com402    Paper detection sensor is OFF (no paper on the feed tray)     copir.com
D01     copir.com526    Print drum is not set in the machine (drum connection signal, drum safety switch, and drum     copir.comlock sensor is OFF     copir.com
D01     copir.com527    Print drum connection signal is OFF when the print drum was inserted in the machine     copir.com
D01     copir.com528    Print drum safety switch is OFF when the print drum was inserted in the machine     copir.com
D01     copir.com529    Print drum lock sensor is OFF when the print drum was inserted in the machine (time     copir.comout: 5 seconds)     copir.com
D01     copir.com530    Print drum connection signal does not go OFF within 5 seconds after the print drum safety switch went OFF when the print drum waspulled out     copir.com
D02     copir.com532    Incorrect print drum is used     copir.com
D03     copir.com533    Ink cartridge set sensor is OFF     copir.com
D04     copir.com534    Incorrect ink cartridge is used     copir.com
D04     copir.com560    Ink TAG is not detected on ink bottle     copir.com
D04     copir.com561    Ink cartridge communication error (communication with the ink cartridge was interfered by noise)     copir.com
D04     copir.com562    Wrong ink cartridge information     copir.com
D04     copir.com564    Detected a mismatch in ink cartridge information
D05     copir.com210    Master detection sensor is OFF (not detecting master)     copir.com
D07     copir.com310    Disposal     copir.combox safety switch is OFF     copir.com
D08     copir.com224    Master making unit is not set (both the safety switch and lock sensor are OFF)     copir.com
D08     copir.com226    Master making unit safety switch is still OFF when the master making unit is set in position     copir.com
D08     copir.com227    Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds)     copir.com
D08     copir.com228    Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit waspulled out of the machine     copir.com
D09     copir.com212    Master     copir.commaking     copir.comunit set sensor is OFF (sensor light path is free)     copir.com
D11     copir.com535    Front cover set switch is OFF     copir.com
D13     copir.com9    The rear cover is opened (serviceman safety switch is OFF)     copir.com
D17     copir.com236    Incorrect master roll     copir.com
D17     copir.com237    Master roll undetected     copir.com
D17     copir.com238    Master roll communication error     copir.com
D17     copir.com239    Wrong master roll detected     copir.com
D17     copir.com241    Detected a mismatch in master roll information     copir.com
D18     copir.com522    Print drum ready for release (solenoid is ON)     copir.com
D19     copir.com223    Master making unit ready for release (solenoid is ON)     copir.com
D22     copir.com540    Error in access to the Drum PCB (unable to read from or write on the Drum PCB)     copir.com
D22     copir.com542    Abnormal data on Drum PCB     copir.com
E01     copir.com10    Battery voltage was less than 2     copir.com5 V when the power was switched ON (weak battery: time to replace battery)     copir.com
E02     copir.com11    Master counter reached the value set for the maintenance call (value set by test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir.com12    Copy counter reached the value set for the maintenance call (value by set test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir.com22    Maintenance counter inside the print drum reached the value set for the maintenance call (value set by test mode)     copir.com [The messageappears when either the power is turned ON, the unit is reset, or when the machine operation ended     copir.com]
F01     copir.com15    There is no master on the print drum at the start of printing     copir.com
F02     copir.com18    Paper size does not match with the image size on the print drum at the start of printing     copir.com
F03     copir.com16    Multi     copir.comup was selected using custom size paper     copir.com
F05     copir.com19    In master making, the print quantity selected is less than the minimum print quantity     copir.com
F10     copir.com21    Paper size does not match with the size of image on the print drum when test print is selected and activated     copir.com
F21     copir.com32    Next original is not in placed on AF for multi     copir.comup operation     copir.com
F22     copir.com33    Next original is not placed on flatbed for multi     copir.comup operation     copir.com
F37     copir.com50    Original was set on the AF with book mode selected, when master making is activated     copir.com
F50     copir.com910    Auto     copir.comprinter     copir.comselection is disabled due to error on linked printer     copir.com
F54     copir.com923    Auto     copir.comprinter     copir.comselection is disabled due to no paper in the linked printer     copir.com
F55     copir.com924    Auto     copir.comprinter     copir.comselection is disabled while receiving print data from PC     copir.com
F58     copir.com927    Cannot print from linked printer (Initializing NET     copir.comC)     copir.com
H1     copir.com566    Requesting ink color information input (Ink     copir.comTAG related)     copir.com
H2     copir.com567    Requesting print density information input (Ink     copir.comTAG related)     copir.com
H3     copir.com568    Requesting test printing print density information input (Ink     copir.comTAG related)     copir.com
H4     copir.com242    Requesting master     copir.commaking density information input (Master     copir.comTAG related)     copir.com
H5     copir.com243    Requesting Print density information input (Master     copir.comTAG related)     copir.com
H6     copir.com244    Requesting test printing print density information input (Master     copir.comTAG related)     copir.com
P01     copir.com520    Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates     copir.com
P01     copir.com521    B     copir.compositioning sensor status does not change even after 3,033 pulses after the main motor activates     copir.com
P01     copir.com524    Clamp unit is not at the home position while the print drum is in operation (except during master disposal)     copir.com
P01     copir.com537    Print drum failed to stop at position B     copir.com (over     copir.comrun)
P01     copir.com538    Print drum is not locked during operation     copir.com (Print     copir.comdrum lock position sensor: OFF)
P02     copir.com400    Both the upper and lower limit sensors were ON at the same time     copir.com
P02     copir.com401    Overload current was detected in the elevator motor     copir.com
P02     copir.com404    The lower     copir.comlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower     copir.comlimitposition     copir.com
P02     copir.com405    The upper     copir.comlimit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction     copir.com
P02     copir.com406    The upper     copir.comlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper     copir.comlimitposition     copir.com
P02     copir.com407    The lower     copir.comlimit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction     copir.com
P02     copir.com408    The upper     copir.comlimit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray     copir.com
P03     copir.com500    Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement     copir.com
P03     copir.com501    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the correct direction     copir.com
P03     copir.com502    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction     copir.com
P03     copir.com503    Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement     copir.com
P03     copir.com504    At the start of Clamp plate open/close action, the the detection sequence of clamp     copir.comsensors A & B is abnormal     copir.com
P03     copir.com505    At the start of print drum Positon     copir.comA compensation movement, the detection sequence of clamp     copir.comsensors A & B is abnormal     copir.com
P03     copir.com506    At the start of Clamp unit Home     copir.compositioning movement, the detection sequence of clamp     copir.comsensors A & B is abnormal     copir.com
P03     copir.com507    Clamp sensor A is ON after the clamp release action is completed     copir.com
P03     copir.com508    Clamp sensor A is ON after the A     copir.composition compensating movement is completed     copir.com
P03     copir.com545    Clamp unit is not in the home position while the print drum is in movement (cause due to the clamp motor)     copir.com
P04     copir.com513    The overflow sensor was ON for a set number of times in succession during the 10     copir.commillisecond     copir.cominterval overflow     copir.comsensor check     copir.com
P05     copir.com603    The vertical     copir.comcentering sensor does not switch ON even when the vertical     copir.compositioning pulse motor activated in the image     copir.comdown direction for5 seconds during vertical home positioning movement     copir.com
P05     copir.com604    The vertical     copir.comcentering sensor does not switch OFF even when the vertical     copir.compositioning pulse motor activated in the image     copir.comup direction for 5seconds during vertical home positioning movement     copir.com
P05     copir.com605    Even though the vertical positioning motor stopped according to the vertical centering sensor detection, the stopping position does notcorrespond with the programmed position     copir.com (GA control error)     copir.com
P05     copir.com612    The one     copir.comstep     copir.compositioning key was pressed with vertical     copir.comprint     copir.composition information undefined     copir.com
P08     copir.com951    Print job executed was not in correct RisoRinc format     copir.com
P11     copir.com600    Print pressure HP sensor does not switch ON within 3     copir.com9 seconds after the print pressure pulse motor activated towards higher pressureduring home positioning operation     copir.com
P11     copir.com601    Print pressure HP sensor does not switch OFF within 4     copir.com6 seconds after the print pressure pulse motor activated towards lower pressureduring home positioning operation     copir.com
P11     copir.com602    Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping positiondoes not correspond with the programmed position     copir.com (GA control error)     copir.com
P12     copir.com300    Overload current was detected in the master removal motor     copir.com
P12     copir.com301    Master compression motor lock when moving compression plate up     copir.com
P12     copir.com305    Master compression sensor does not go ON within 6     copir.com5 seconds after the master compression motor operates in the return direction     copir.com
P12     copir.com306    Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction     copir.com
P12     copir.com307    Master compression plate maximum position is not detected within 6     copir.com5 seconds after the master compression motor operates in thecompress direction     copir.com
P12     copir.com309    Master     copir.comcompression     copir.commotor encoder sensor count did not change as the master compression motor activated in the compress directionand moved out from the home position     copir.com
P12     copir.com316    Master     copir.comcompression     copir.commotor encoder sensor count did not change within 10 milliseconds after the master compression motor activated     copir.com
P13     copir.com203    Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated     copir.com
P13     copir.com204    Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated     copir.com
P13     copir.com205    Master     copir.compositioning sensor is ON when the print drum rotates through the preset angle following master cutting     copir.com
P13     copir.com221    Both the cutter HP switch and cutter stop position switch are ON at the same time     copir.com
P13     copir.com222    Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started     copir.com
P13     copir.com231    Cutter HP switch does not go OFF within 500 milliseconds after the cutter moved out from the home position     copir.com
P13     copir.com232    Cutter stop position switch does not go ON within 2 seconds after the cutting operation started     copir.com
P13     copir.com233    Cutter stop position switch does not go OFF within 500 milliseconds after the cutter activates to move from the stop position to the homeposition     copir.com
P13     copir.com234    Cutter HP switch does not go ON within 2 seconds after the cutter home positioning operation started     copir.com
P14     copir.com114    Incorrect main     copir.comunit data     copir.com
P14     copir.com115    The scanner operation is not completed within the set time     copir.com
P14     copir.com116    Timeout error for black shading compensation     copir.com (RZ3 series only)
P14     copir.com117    Timeout error for white shading compensation     copir.com (RZ3 series only)
P14     copir.com123    Offset adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir.com124    Gain adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir.com125    Offset adjustment not completed     copir.com
P14     copir.com126    Gain adjustment not completed     copir.com
P14     copir.com135    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir.com136    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir.com137    Malfunction detected during black shading compensation     copir.com (RZ3 series only)
P14     copir.com138    Malfunction detected during white shading compensation     copir.com (RZ3 series only)
P14     copir.com170    Even though the read pulse motor stopped according to the sensor detection, the stopping position does not correspond with theprogrammed position     copir.com (GA control error)     copir.com
P15     copir.com110    ABC (auto     copir.combase     copir.comcontrol) timeout     copir.com The original does not move from the ABC scanning position on the AF unit     copir.com
P15     copir.com111    Operation command was made to the AF unit without 24 volts supplied to the AF unit     copir.com
P15     copir.com130    Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit     copir.com
P15     copir.com131    Riso printer received an undefined command from the AF unit     copir.com
P15     copir.com132    Riso printer detected communication sequence error from the AF unit     copir.com
P15     copir.com133    Communication error with AF unit (ACK or NAK error)     copir.com
P15     copir.com134    Riso printer could not send command to the AF unit within the set time     copir.com
P15     copir.com160    AF unit detection signal went OFF while the AF unit is in operation     copir.com
P15     copir.com4    Communication error with AF     copir.comCPU     copir.com
P17     copir.com20    Solenoid counter is not connected     copir.com
P18     copir.com531    Print drum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated     copir.com
P19     copir.com207    TPH pressure sensor does not go OFF within 2 seconds after the thermal     copir.compressure motor activates in the decompressing direction, orduring home positioning operation     copir.com
P19     copir.com208    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir.compressure motor activates in the decompressing direction     copir.com
P19     copir.com216    TPH pressure sensor does not go OFF within 500 millisecond after the thermal     copir.compressure motor activates in the compressing direction     copir.com
P19     copir.com217    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir.compressure motor activates in the compressing direction     copir.com
P20     copir.com415    Paper     copir.comejection     copir.comwing home sensor does not go OFF within 7,000 milliseconds after the paper ejection wing motor activates in thecounterclockwise direction from the home position     copir.com
P20     copir.com416    Overload current was detected in the paper     copir.comejection motor     copir.com
P20     copir.com437    Paper     copir.comejection encoder sensor status does not change within 10 milliseconds after the paper     copir.comejection motor is activated     copir.com
P24     copir.com539    Inking     copir.commotor encoder sensor status does not change within 20 milliseconds after the inking     copir.commotor is activated     copir.com
P25     copir.com26    Battery voltage was below 2     copir.com3 volts (too low) when the power is turned ON     copir.com
P92     copir.com570    EEPROM on the print drum PCB was being accessed while the print drum was in releasing action from the machine     copir.com
P93     copir.com932    No reply from the NET     copir.comC network interface card while accessing to the network interface card     copir.com
P93     copir.com933    No response from NET     copir.comC for 90 seconds during NET     copir.comC initialization     copir.com
P94     copir.com225    TPH code does not match with the machine code when the power is turned ON with the master     copir.commaking unit in operating position or whenthe master     copir.commaking unit is inserted in operating position while the power is ON     copir.com
P95     copir.com59    Machine serial     copir.comnumber information sent from SH     copir.comPCB does not match with the machine serial number information in the MCTL PCB     copir.com
P96     copir.com171    TPH resistance value not input     copir.com
P96     copir.com172    Scanner adjustment not completed     copir.com
P96     copir.com433    Paper size width potentiometer test     copir.commode setting is not completed     copir.com
P96     copir.com569    Either the print drum color information or ink category information is still not input     copir.com
P96     copir.com613    Print pressure data missing     copir.com
P98     copir.com119    Image processing PCB trouble     copir.com
P98     copir.com120    Scanner communication problem     copir.com (RZ3 series only)
P98     copir.com129    Faulty Scanner GA PCB     copir.com (RZ3 series only)
P98     copir.com2    No reply from Mini     copir.comRosa PCB when the machine power is turned ON even though the Rosa connection signal is ON     copir.com
P98     copir.com245    Master transfer time     copir.comout error during master making (Write pulse motor error)     copir.com
P98     copir.com246    Master transfer time     copir.comout error during master making (Load pulse motor error)     copir.com
P98     copir.com38    Machine data on EEPROM does not match with that on the SH     copir.comPCB
P98     copir.com39    Improper EEPROM on the SH     copir.comPCB     copir.com
P98     copir.com46    The DIMM capacity does not match     copir.com
P98     copir.com5    Hardware error     copir.com
P98     copir.com51    Touch     copir.companel communication error
P98     copir.com53    Failure in calling out the saved Memory settings (program, mode, user paper information)     copir.com
P98     copir.com54    Failure in saving the Memory settings (program, mode, user paper information)     copir.com
P98     copir.com55    Machine type code from SH     copir.comPCB does not match with the machine information on the H8     copir.comPCB     copir.com
P98     copir.com6    FRAM checksum error     copir.com
P98     copir.com614    Vertical print position data missing     copir.com
P98     copir.com63    The test     copir.commode memory data stored was outside the adjustment range     copir.com
P98     copir.com64    An undefined command was sent in communication between SH     copir.comPCB and MCTL PCB     copir.com
P98     copir.com65    Communication error 01 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com67    Communication error 03 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com68    Communication error 04 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com69    Communication error 05 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com7    Mini Rosa PCB not connected     copir.com
P98     copir.com70    Communication error 06 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com71    Communication error 07 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com72    Communication error 08 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com73    Communication error 09 between SH     copir.comPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir.com74    Communication error 10 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com75    Communication error 11 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com76    Communication error 12 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com77    Communication error 13 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com78    Communication error 14 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com79    Communication error 15 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com80    Communication error 16 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com81    Communication error 17 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com82    Communication error 18 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com83    Communication error 19 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com84    Communication error 20 between SH     copir.comPCB and MCTL PCB (SH     copir.comPCB side)
P98     copir.com934    Main read/write communication error (detected by read/write side)     copir.com
P98     copir.com935    Main read/write communication error (detected by machine side)     copir.com
P98     copir.com937    Serial number data missing     copir.com
P98     copir.com938    FRAM version     copir.comdown     copir.com
P98     copir.com947    24V     copir.comA does not go ON (a possible burnt 24     copir.comvolt group     copir.comA fuse)     copir.com
P98     copir.com948    24V     copir.comB does not go ON (a possible burnt 24     copir.comvolt group     copir.comB fuse)     copir.com
P98     copir.com949    24V     copir.comA does not go OFF     copir.com
P98     copir.com950    24V     copir.comB does not fo OFF     copir.com
P98     copir.com952    Checksum error on the ROSA flash     copir.commemory     copir.com
P98     copir.com953    Unsuccessful writing on the ROSA flash     copir.commemory     copir.com
P98     copir.com98    Machine serial number information on the SH     copir.comPCB EEPROM does not match with that in the FRAM     copir.com
P99     copir.com936    Software error

سه شنبه, 31 فروردين 1395 22:50

ریسو گراف rz977

نوشته شده توسط

A01     copir     copir     copir.comcomcom201    Master     copir     copir     copir.comcomcompositioning sensor does not go ON even after the write pulse motor is activated during the master     copir     copir     copir.comcomcompositioning, master     copir     copir     copir.comcomcomcut, ormaster     copir     copir     copir.comcomcomloading operation     copir     copir.comcom
A01     copir     copir     copir.comcomcom202    Master     copir     copir     copir.comcomcompositioning sensor does not go OFF even when the write pulse motor is reversed during the master     copir     copir     copir.comcomcompositioning or at start ofmaster     copir     copir     copir.comcomcommaking operation     copir     copir.comcom
A01     copir     copir     copir.comcomcom206    Timeout error during master     copir     copir     copir.comcomcommaking operation
A01     copir     copir     copir.comcomcom211    Master     copir     copir     copir.comcomcompositioning sensor is ON during standby     copir     copir.comcom
A01     copir     copir     copir.comcomcom214    Master     copir     copir     copir.comcomcompositioning sensor is ON at the start of master making     copir     copir.comcom
A01     copir     copir     copir.comcomcom215    Faulty gate     copir     copir     copir.comcomcomarray control for the write pulse motor (motor does not stop within set time)
A02     copir     copir     copir.comcomcom509    Master     copir     copir     copir.comcomcomloading sensor was OFF when the master was checked at a specified drum angle during the master     copir     copir     copir.comcomcomloading oper201ation     copir     copir.comcom
A04     copir     copir     copir.comcomcom303    Master     copir     copir     copir.comcomcomdisposal jam sensor was OFF at both 120 and 180 degrees drum angle     copir     copir.comcom
A04     copir     copir     copir.comcomcom314    Master     copir     copir     copir.comcomcomdisposal error (recovery error)     copir     copir.comcom
A05     copir     copir     copir.comcomcom304    Master     copir     copir     copir.comcomcomdisposal jam sensor was ON at the completion of the master     copir     copir     copir.comcomcomdisposal operation     copir     copir.comcom
A05     copir     copir     copir.comcomcom312    The master     copir     copir     copir.comcomcomdisposal jam sensor was ON at the start of master     copir     copir     copir.comcomcommaking operation     copir     copir.comcom
A05     copir     copir     copir.comcomcom315    The master     copir     copir     copir.comcomcomdisposal jam sensor was ON when the master disposal box was set in the machine     copir     copir.comcom
A06     copir     copir     copir.comcomcom403    Paper     copir     copir     copir.comcomcomfeed     copir     copir     copir.comcomcomtray upper or lower safety switch is OFF     copir     copir.comcom
A07     copir     copir     copir.comcomcom409    Paper     copir     copir     copir.comcomcomejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Papermisfeed)     copir     copir.comcom
A07     copir     copir     copir.comcomcom412    Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed)     copir     copir.comcom
A07     copir     copir     copir.comcomcom413    Paper sensor was ON when the paper should have left the paper sensor (long     copir     copir     copir.comcomcomlength paper mode error)     copir     copir.comcom
A07     copir     copir     copir.comcomcom418    The paper sensor was ON at the start of machine operation when the START button was pressed     copir     copir.comcom
A07     copir     copir     copir.comcomcom429    Paper feed error (recovery error)     copir     copir.comcom
A07     copir     copir     copir.comcomcom432    Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed     copir     copir.comcom
A08     copir     copir     copir.comcomcom410    Paper     copir     copir     copir.comcomcomejection sensor was OFF when paper should have arrived, and the paper sensor was OFF when the machine stopped (paper jamon the print drum)     copir     copir.comcom
A08     copir     copir     copir.comcomcom421    Paper sensor was ON when the paper should have left the paper sensor during feeding of long paper in long     copir     copir     copir.comcomcomlength paper mode (paperlonger than 555 mm)     copir     copir.comcom
A08     copir     copir     copir.comcomcom430    Paper jam on print drum (recovery error)     copir     copir.comcom
A09     copir     copir     copir.comcomcom411    Paper     copir     copir     copir.comcomcomejection sensor was ON when the paper should have left the paper     copir     copir     copir.comcomcomejection sensor     copir     copir.comcom
A09     copir     copir     copir.comcomcom417    Paper     copir     copir     copir.comcomcomejection sensor was ON at the start of machine operation when the START button was pressed     copir     copir.comcom
A09     copir     copir     copir.comcomcom431    Paper     copir     copir     copir.comcomcomejection error (recovery error)     copir     copir.comcom
A10     copir     copir     copir.comcomcom102    Original     copir     copir     copir.comcomcomregistration     copir     copir     copir.comcomcomsensor remaining jam
A10     copir     copir     copir.comcomcom103    Original     copir     copir     copir.comcomcomIN     copir     copir     copir.comcomcomsensor remaining jam
A10     copir     copir     copir.comcomcom105    Original     copir     copir     copir.comcomcomregistration     copir     copir     copir.comcomcomsensor non     copir     copir     copir.comcomcomarrival jam
A10     copir     copir     copir.comcomcom106    Original     copir     copir     copir.comcomcomIN     copir     copir     copir.comcomcomsensor non     copir     copir     copir.comcomcomarrival jam
A10     copir     copir     copir.comcomcom107    Original     copir     copir     copir.comcomcomOUT     copir     copir     copir.comcomcomsensor non     copir     copir     copir.comcomcomarrival jam
A10     copir     copir     copir.comcomcom109    An original feed error occurred, due to opening the AF     copir     copir.comcom
A10     copir     copir     copir.comcomcom162    No original in AF during AF master making     copir     copir.comcom
A16     copir     copir     copir.comcomcom525    Waiting for the master to be removed     copir     copir.comcom
A17     copir     copir     copir.comcomcom209    Cutter home     copir     copir     copir.comcomcomposition switch is OFF at the start of master     copir     copir     copir.comcomcommaking or master     copir     copir     copir.comcomcomset operation     copir     copir.comcom
A34     copir     copir     copir.comcomcom218    Request to resetting the master     copir     copir.comcom
B01     copir     copir     copir.comcomcom730    Keycard counter: No card
B22     copir     copir     copir.comcomcom721    With the “Tape separation” function set ON, no power is supplied to the job separator when start key is pressed     copir     copir.comcom
B22     copir     copir     copir.comcomcom727    After cluster     copir     copir     copir.comcomcomA signal turned ON, BUSY     copir     copir     copir.comcomcomsignal stayed "L" more than 7 seconds (power to job separator was turned OFF while the tape isbeing ejected     copir     copir.comcom
B23     copir     copir     copir.comcomcom722    With the “Tape separation” function set ON, no tape detected in the job separator when the start key is pressed     copir     copir.comcom
B23     copir     copir     copir.comcomcom723    No tape remains in job separator upon completion of the tape     copir     copir     copir.comcomcomejection operation     copir     copir.comcom
B24     copir     copir     copir.comcomcom724    Tape jam detected when the start key is pressed with the “Tape separation” function set to ON     copir     copir.comcom
B24     copir     copir     copir.comcomcom725    Job separator tape     copir     copir     copir.comcomcomjam detection signal is “H” within 1,200 milliseconds after the cluster     copir     copir     copir.comcomcomA signal turns ON (tape misfeed)     copir     copir.comcom
B24     copir     copir     copir.comcomcom726    Job separator tape     copir     copir     copir.comcomcomjam detection signal is “L” when the BUSY signal changes from “L” to “H” (or after 7 sec     copir     copir.comcom at “L”) after the cluster     copir     copir     copir.comcomcomAsignal goes ON (tape misfeed)     copir     copir.comcom
B31     copir     copir     copir.comcomcom916    Network cable is not connected when the machine is powered ON     copir     copir.comcom
B32     copir     copir     copir.comcomcom917    Communication error on the network     copir     copir.comcom
B32     copir     copir     copir.comcomcom920    Error detected by Network Interface Card (NIC)      copir     copir     copir.comcomcom NAK (negative acknowledgement was received)     copir     copir.comcom
B33     copir     copir     copir.comcomcom931    DHCP server is not found with DHCP ON     copir     copir.comcom
B34     copir     copir     copir.comcomcom919    Error detected on the locally connected printer     copir     copir.comcom
C01     copir     copir     copir.comcomcom512    The ink sensor did not go ON even when inking was performed for the preset period     copir     copir.comcom
C01     copir     copir     copir.comcomcom563    Ink remaining amount is zero     copir     copir.comcom
C01     copir     copir     copir.comcomcom574    Inkless error was detected 5 times consecutively on one same ink bottle     copir     copir.comcom
C02     copir     copir     copir.comcomcom200    The master end was detected twice in succession at 10     copir     copir     copir.comcomcommilliseconds intervals during master transport     copir     copir.comcom
C02     copir     copir     copir.comcomcom240    Master remaining amount is zero
C03     copir     copir     copir.comcomcom308    Compression detection position was reached before the master     copir     copir     copir.comcomcomcompression     copir     copir     copir.comcomcommotor encoder     copir     copir     copir.comcomcomsensor count reached the specified level,after the master compression motor turned ON in the compression direction     copir     copir.comcom
C03     copir     copir     copir.comcomcom313    Master removal box full detected by the master removal count     copir     copir.comcom
C04     copir     copir     copir.comcomcom402    Paper detection sensor is OFF (no paper on the feed tray)     copir     copir.comcom
D01     copir     copir     copir.comcomcom526    Print drum is not set in the machine (drum connection signal, drum safety switch, and drum     copir     copir     copir.comcomcomlock sensor is OFF     copir     copir.comcom
D01     copir     copir     copir.comcomcom527    Print drum connection signal is OFF when the print drum was inserted in the machine     copir     copir.comcom
D01     copir     copir     copir.comcomcom528    Print drum safety switch is OFF when the print drum was inserted in the machine     copir     copir.comcom
D01     copir     copir     copir.comcomcom529    Print drum lock sensor is OFF when the print drum was inserted in the machine (time     copir     copir     copir.comcomcomout: 5 seconds)     copir     copir.comcom
D01     copir     copir     copir.comcomcom530    Print drum connection signal does not go OFF within 5 seconds after the print drum safety switch went OFF when the print drum waspulled out     copir     copir.comcom
D02     copir     copir     copir.comcomcom532    Incorrect print drum is used     copir     copir.comcom
D03     copir     copir     copir.comcomcom533    Ink cartridge set sensor is OFF     copir     copir.comcom
D04     copir     copir     copir.comcomcom534    Incorrect ink cartridge is used     copir     copir.comcom
D04     copir     copir     copir.comcomcom560    Ink TAG is not detected on ink bottle     copir     copir.comcom
D04     copir     copir     copir.comcomcom561    Ink cartridge communication error (communication with the ink cartridge was interfered by noise)     copir     copir.comcom
D04     copir     copir     copir.comcomcom562    Wrong ink cartridge information     copir     copir.comcom
D04     copir     copir     copir.comcomcom564    Detected a mismatch in ink cartridge information
D05     copir     copir     copir.comcomcom210    Master detection sensor is OFF (not detecting master)     copir     copir.comcom
D07     copir     copir     copir.comcomcom310    Disposal     copir     copir     copir.comcomcombox safety switch is OFF     copir     copir.comcom
D08     copir     copir     copir.comcomcom224    Master making unit is not set (both the safety switch and lock sensor are OFF)     copir     copir.comcom
D08     copir     copir     copir.comcomcom226    Master making unit safety switch is still OFF when the master making unit is set in position     copir     copir.comcom
D08     copir     copir     copir.comcomcom227    Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds)     copir     copir.comcom
D08     copir     copir     copir.comcomcom228    Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit waspulled out of the machine     copir     copir.comcom
D09     copir     copir     copir.comcomcom212    Master     copir     copir     copir.comcomcommaking     copir     copir     copir.comcomcomunit set sensor is OFF (sensor light path is free)     copir     copir.comcom
D11     copir     copir     copir.comcomcom535    Front cover set switch is OFF     copir     copir.comcom
D13     copir     copir     copir.comcomcom9    The rear cover is opened (serviceman safety switch is OFF)     copir     copir.comcom
D17     copir     copir     copir.comcomcom236    Incorrect master roll     copir     copir.comcom
D17     copir     copir     copir.comcomcom237    Master roll undetected     copir     copir.comcom
D17     copir     copir     copir.comcomcom238    Master roll communication error     copir     copir.comcom
D17     copir     copir     copir.comcomcom239    Wrong master roll detected     copir     copir.comcom
D17     copir     copir     copir.comcomcom241    Detected a mismatch in master roll information     copir     copir.comcom
D18     copir     copir     copir.comcomcom522    Print drum ready for release (solenoid is ON)     copir     copir.comcom
D19     copir     copir     copir.comcomcom223    Master making unit ready for release (solenoid is ON)     copir     copir.comcom
D22     copir     copir     copir.comcomcom540    Error in access to the Drum PCB (unable to read from or write on the Drum PCB)     copir     copir.comcom
D22     copir     copir     copir.comcomcom542    Abnormal data on Drum PCB     copir     copir.comcom
E01     copir     copir     copir.comcomcom10    Battery voltage was less than 2     copir     copir.comcom5 V when the power was switched ON (weak battery: time to replace battery)     copir     copir.comcom
E02     copir     copir     copir.comcomcom11    Master counter reached the value set for the maintenance call (value set by test mode)     copir     copir.comcom [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir     copir.comcom]
E02     copir     copir     copir.comcomcom12    Copy counter reached the value set for the maintenance call (value by set test mode)     copir     copir.comcom [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir     copir.comcom]
E02     copir     copir     copir.comcomcom22    Maintenance counter inside the print drum reached the value set for the maintenance call (value set by test mode)     copir     copir.comcom [The messageappears when either the power is turned ON, the unit is reset, or when the machine operation ended     copir     copir.comcom]
F01     copir     copir     copir.comcomcom15    There is no master on the print drum at the start of printing     copir     copir.comcom
F02     copir     copir     copir.comcomcom18    Paper size does not match with the image size on the print drum at the start of printing     copir     copir.comcom
F03     copir     copir     copir.comcomcom16    Multi     copir     copir     copir.comcomcomup was selected using custom size paper     copir     copir.comcom
F05     copir     copir     copir.comcomcom19    In master making, the print quantity selected is less than the minimum print quantity     copir     copir.comcom
F10     copir     copir     copir.comcomcom21    Paper size does not match with the size of image on the print drum when test print is selected and activated     copir     copir.comcom
F21     copir     copir     copir.comcomcom32    Next original is not in placed on AF for multi     copir     copir     copir.comcomcomup operation     copir     copir.comcom
F22     copir     copir     copir.comcomcom33    Next original is not placed on flatbed for multi     copir     copir     copir.comcomcomup operation     copir     copir.comcom
F37     copir     copir     copir.comcomcom50    Original was set on the AF with book mode selected, when master making is activated     copir     copir.comcom
F50     copir     copir     copir.comcomcom910    Auto     copir     copir     copir.comcomcomprinter     copir     copir     copir.comcomcomselection is disabled due to error on linked printer     copir     copir.comcom
F54     copir     copir     copir.comcomcom923    Auto     copir     copir     copir.comcomcomprinter     copir     copir     copir.comcomcomselection is disabled due to no paper in the linked printer     copir     copir.comcom
F55     copir     copir     copir.comcomcom924    Auto     copir     copir     copir.comcomcomprinter     copir     copir     copir.comcomcomselection is disabled while receiving print data from PC     copir     copir.comcom
F58     copir     copir     copir.comcomcom927    Cannot print from linked printer (Initializing NET     copir     copir     copir.comcomcomC)     copir     copir.comcom
H1     copir     copir     copir.comcomcom566    Requesting ink color information input (Ink     copir     copir     copir.comcomcomTAG related)     copir     copir.comcom
H2     copir     copir     copir.comcomcom567    Requesting print density information input (Ink     copir     copir     copir.comcomcomTAG related)     copir     copir.comcom
H3     copir     copir     copir.comcomcom568    Requesting test printing print density information input (Ink     copir     copir     copir.comcomcomTAG related)     copir     copir.comcom
H4     copir     copir     copir.comcomcom242    Requesting master     copir     copir     copir.comcomcommaking density information input (Master     copir     copir     copir.comcomcomTAG related)     copir     copir.comcom
H5     copir     copir     copir.comcomcom243    Requesting Print density information input (Master     copir     copir     copir.comcomcomTAG related)     copir     copir.comcom
H6     copir     copir     copir.comcomcom244    Requesting test printing print density information input (Master     copir     copir     copir.comcomcomTAG related)     copir     copir.comcom
P01     copir     copir     copir.comcomcom520    Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates     copir     copir.comcom
P01     copir     copir     copir.comcomcom521    B     copir     copir     copir.comcomcompositioning sensor status does not change even after 3,033 pulses after the main motor activates     copir     copir.comcom
P01     copir     copir     copir.comcomcom524    Clamp unit is not at the home position while the print drum is in operation (except during master disposal)     copir     copir.comcom
P01     copir     copir     copir.comcomcom537    Print drum failed to stop at position B     copir     copir.comcom (over     copir     copir     copir.comcomcomrun)
P01     copir     copir     copir.comcomcom538    Print drum is not locked during operation     copir     copir.comcom (Print     copir     copir     copir.comcomcomdrum lock position sensor: OFF)
P02     copir     copir     copir.comcomcom400    Both the upper and lower limit sensors were ON at the same time     copir     copir.comcom
P02     copir     copir     copir.comcomcom401    Overload current was detected in the elevator motor     copir     copir.comcom
P02     copir     copir     copir.comcomcom404    The lower     copir     copir     copir.comcomcomlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower     copir     copir     copir.comcomcomlimitposition     copir     copir.comcom
P02     copir     copir     copir.comcomcom405    The upper     copir     copir     copir.comcomcomlimit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction     copir     copir.comcom
P02     copir     copir     copir.comcomcom406    The upper     copir     copir     copir.comcomcomlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper     copir     copir     copir.comcomcomlimitposition     copir     copir.comcom
P02     copir     copir     copir.comcomcom407    The lower     copir     copir     copir.comcomcomlimit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction     copir     copir.comcom
P02     copir     copir     copir.comcomcom408    The upper     copir     copir     copir.comcomcomlimit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray     copir     copir.comcom
P03     copir     copir     copir.comcomcom500    Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement     copir     copir.comcom
P03     copir     copir     copir.comcomcom501    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the correct direction     copir     copir.comcom
P03     copir     copir     copir.comcomcom502    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction     copir     copir.comcom
P03     copir     copir     copir.comcomcom503    Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement     copir     copir.comcom
P03     copir     copir     copir.comcomcom504    At the start of Clamp plate open/close action, the the detection sequence of clamp     copir     copir     copir.comcomcomsensors A & B is abnormal     copir     copir.comcom
P03     copir     copir     copir.comcomcom505    At the start of print drum Positon     copir     copir     copir.comcomcomA compensation movement, the detection sequence of clamp     copir     copir     copir.comcomcomsensors A & B is abnormal     copir     copir.comcom
P03     copir     copir     copir.comcomcom506    At the start of Clamp unit Home     copir     copir     copir.comcomcompositioning movement, the detection sequence of clamp     copir     copir     copir.comcomcomsensors A & B is abnormal     copir     copir.comcom
P03     copir     copir     copir.comcomcom507    Clamp sensor A is ON after the clamp release action is completed     copir     copir.comcom
P03     copir     copir     copir.comcomcom508    Clamp sensor A is ON after the A     copir     copir     copir.comcomcomposition compensating movement is completed     copir     copir.comcom
P03     copir     copir     copir.comcomcom545    Clamp unit is not in the home position while the print drum is in movement (cause due to the clamp motor)     copir     copir.comcom
P04     copir     copir     copir.comcomcom513    The overflow sensor was ON for a set number of times in succession during the 10     copir     copir     copir.comcomcommillisecond     copir     copir     copir.comcomcominterval overflow     copir     copir     copir.comcomcomsensor check     copir     copir.comcom
P05     copir     copir     copir.comcomcom603    The vertical     copir     copir     copir.comcomcomcentering sensor does not switch ON even when the vertical     copir     copir     copir.comcomcompositioning pulse motor activated in the image     copir     copir     copir.comcomcomdown direction for5 seconds during vertical home positioning movement     copir     copir.comcom
P05     copir     copir     copir.comcomcom604    The vertical     copir     copir     copir.comcomcomcentering sensor does not switch OFF even when the vertical     copir     copir     copir.comcomcompositioning pulse motor activated in the image     copir     copir     copir.comcomcomup direction for 5seconds during vertical home positioning movement     copir     copir.comcom
P05     copir     copir     copir.comcomcom605    Even though the vertical positioning motor stopped according to the vertical centering sensor detection, the stopping position does notcorrespond with the programmed position     copir     copir.comcom (GA control error)     copir     copir.comcom
P05     copir     copir     copir.comcomcom612    The one     copir     copir     copir.comcomcomstep     copir     copir     copir.comcomcompositioning key was pressed with vertical     copir     copir     copir.comcomcomprint     copir     copir     copir.comcomcomposition information undefined     copir     copir.comcom
P08     copir     copir     copir.comcomcom951    Print job executed was not in correct RisoRinc format     copir     copir.comcom
P11     copir     copir     copir.comcomcom600    Print pressure HP sensor does not switch ON within 3     copir     copir.comcom9 seconds after the print pressure pulse motor activated towards higher pressureduring home positioning operation     copir     copir.comcom
P11     copir     copir     copir.comcomcom601    Print pressure HP sensor does not switch OFF within 4     copir     copir.comcom6 seconds after the print pressure pulse motor activated towards lower pressureduring home positioning operation     copir     copir.comcom
P11     copir     copir     copir.comcomcom602    Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping positiondoes not correspond with the programmed position     copir     copir.comcom (GA control error)     copir     copir.comcom
P12     copir     copir     copir.comcomcom300    Overload current was detected in the master removal motor     copir     copir.comcom
P12     copir     copir     copir.comcomcom301    Master compression motor lock when moving compression plate up     copir     copir.comcom
P12     copir     copir     copir.comcomcom305    Master compression sensor does not go ON within 6     copir     copir.comcom5 seconds after the master compression motor operates in the return direction     copir     copir.comcom
P12     copir     copir     copir.comcomcom306    Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction     copir     copir.comcom
P12     copir     copir     copir.comcomcom307    Master compression plate maximum position is not detected within 6     copir     copir.comcom5 seconds after the master compression motor operates in thecompress direction     copir     copir.comcom
P12     copir     copir     copir.comcomcom309    Master     copir     copir     copir.comcomcomcompression     copir     copir     copir.comcomcommotor encoder sensor count did not change as the master compression motor activated in the compress directionand moved out from the home position     copir     copir.comcom
P12     copir     copir     copir.comcomcom316    Master     copir     copir     copir.comcomcomcompression     copir     copir     copir.comcomcommotor encoder sensor count did not change within 10 milliseconds after the master compression motor activated     copir     copir.comcom
P13     copir     copir     copir.comcomcom203    Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated     copir     copir.comcom
P13     copir     copir     copir.comcomcom204    Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated     copir     copir.comcom
P13     copir     copir     copir.comcomcom205    Master     copir     copir     copir.comcomcompositioning sensor is ON when the print drum rotates through the preset angle following master cutting     copir     copir.comcom
P13     copir     copir     copir.comcomcom221    Both the cutter HP switch and cutter stop position switch are ON at the same time     copir     copir.comcom
P13     copir     copir     copir.comcomcom222    Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started     copir     copir.comcom
P13     copir     copir     copir.comcomcom231    Cutter HP switch does not go OFF within 500 milliseconds after the cutter moved out from the home position     copir     copir.comcom
P13     copir     copir     copir.comcomcom232    Cutter stop position switch does not go ON within 2 seconds after the cutting operation started     copir     copir.comcom
P13     copir     copir     copir.comcomcom233    Cutter stop position switch does not go OFF within 500 milliseconds after the cutter activates to move from the stop position to the homeposition     copir     copir.comcom
P13     copir     copir     copir.comcomcom234    Cutter HP switch does not go ON within 2 seconds after the cutter home positioning operation started     copir     copir.comcom
P14     copir     copir     copir.comcomcom114    Incorrect main     copir     copir     copir.comcomcomunit data     copir     copir.comcom
P14     copir     copir     copir.comcomcom115    The scanner operation is not completed within the set time     copir     copir.comcom
P14     copir     copir     copir.comcomcom116    Timeout error for black shading compensation     copir     copir.comcom (RZ3 series only)
P14     copir     copir     copir.comcomcom117    Timeout error for white shading compensation     copir     copir.comcom (RZ3 series only)
P14     copir     copir     copir.comcomcom123    Offset adjustment not completed within set time     copir     copir.comcom (RZ3 series only)
P14     copir     copir     copir.comcomcom124    Gain adjustment not completed within set time     copir     copir.comcom (RZ3 series only)
P14     copir     copir     copir.comcomcom125    Offset adjustment not completed     copir     copir.comcom
P14     copir     copir     copir.comcomcom126    Gain adjustment not completed     copir     copir.comcom
P14     copir     copir     copir.comcomcom135    Malfunction detected during offset adjustment     copir     copir.comcom (RZ3 series only)
P14     copir     copir     copir.comcomcom136    Malfunction detected during offset adjustment     copir     copir.comcom (RZ3 series only)
P14     copir     copir     copir.comcomcom137    Malfunction detected during black shading compensation     copir     copir.comcom (RZ3 series only)
P14     copir     copir     copir.comcomcom138    Malfunction detected during white shading compensation     copir     copir.comcom (RZ3 series only)
P14     copir     copir     copir.comcomcom170    Even though the read pulse motor stopped according to the sensor detection, the stopping position does not correspond with theprogrammed position     copir     copir.comcom (GA control error)     copir     copir.comcom
P15     copir     copir     copir.comcomcom110    ABC (auto     copir     copir     copir.comcomcombase     copir     copir     copir.comcomcomcontrol) timeout     copir     copir.comcom The original does not move from the ABC scanning position on the AF unit     copir     copir.comcom
P15     copir     copir     copir.comcomcom111    Operation command was made to the AF unit without 24 volts supplied to the AF unit     copir     copir.comcom
P15     copir     copir     copir.comcomcom130    Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit     copir     copir.comcom
P15     copir     copir     copir.comcomcom131    Riso printer received an undefined command from the AF unit     copir     copir.comcom
P15     copir     copir     copir.comcomcom132    Riso printer detected communication sequence error from the AF unit     copir     copir.comcom
P15     copir     copir     copir.comcomcom133    Communication error with AF unit (ACK or NAK error)     copir     copir.comcom
P15     copir     copir     copir.comcomcom134    Riso printer could not send command to the AF unit within the set time     copir     copir.comcom
P15     copir     copir     copir.comcomcom160    AF unit detection signal went OFF while the AF unit is in operation     copir     copir.comcom
P15     copir     copir     copir.comcomcom4    Communication error with AF     copir     copir     copir.comcomcomCPU     copir     copir.comcom
P17     copir     copir     copir.comcomcom20    Solenoid counter is not connected     copir     copir.comcom
P18     copir     copir     copir.comcomcom531    Print drum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated     copir     copir.comcom
P19     copir     copir     copir.comcomcom207    TPH pressure sensor does not go OFF within 2 seconds after the thermal     copir     copir     copir.comcomcompressure motor activates in the decompressing direction, orduring home positioning operation     copir     copir.comcom
P19     copir     copir     copir.comcomcom208    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir     copir     copir.comcomcompressure motor activates in the decompressing direction     copir     copir.comcom
P19     copir     copir     copir.comcomcom216    TPH pressure sensor does not go OFF within 500 millisecond after the thermal     copir     copir     copir.comcomcompressure motor activates in the compressing direction     copir     copir.comcom
P19     copir     copir     copir.comcomcom217    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir     copir     copir.comcomcompressure motor activates in the compressing direction     copir     copir.comcom
P20     copir     copir     copir.comcomcom415    Paper     copir     copir     copir.comcomcomejection     copir     copir     copir.comcomcomwing home sensor does not go OFF within 7,000 milliseconds after the paper ejection wing motor activates in thecounterclockwise direction from the home position     copir     copir.comcom
P20     copir     copir     copir.comcomcom416    Overload current was detected in the paper     copir     copir     copir.comcomcomejection motor     copir     copir.comcom
P20     copir     copir     copir.comcomcom437    Paper     copir     copir     copir.comcomcomejection encoder sensor status does not change within 10 milliseconds after the paper     copir     copir     copir.comcomcomejection motor is activated     copir     copir.comcom
P24     copir     copir     copir.comcomcom539    Inking     copir     copir     copir.comcomcommotor encoder sensor status does not change within 20 milliseconds after the inking     copir     copir     copir.comcomcommotor is activated     copir     copir.comcom
P25     copir     copir     copir.comcomcom26    Battery voltage was below 2     copir     copir.comcom3 volts (too low) when the power is turned ON     copir     copir.comcom
P92     copir     copir     copir.comcomcom570    EEPROM on the print drum PCB was being accessed while the print drum was in releasing action from the machine     copir     copir.comcom
P93     copir     copir     copir.comcomcom932    No reply from the NET     copir     copir     copir.comcomcomC network interface card while accessing to the network interface card     copir     copir.comcom
P93     copir     copir     copir.comcomcom933    No response from NET     copir     copir     copir.comcomcomC for 90 seconds during NET     copir     copir     copir.comcomcomC initialization     copir     copir.comcom
P94     copir     copir     copir.comcomcom225    TPH code does not match with the machine code when the power is turned ON with the master     copir     copir     copir.comcomcommaking unit in operating position or whenthe master     copir     copir     copir.comcomcommaking unit is inserted in operating position while the power is ON     copir     copir.comcom
P95     copir     copir     copir.comcomcom59    Machine serial     copir     copir     copir.comcomcomnumber information sent from SH     copir     copir     copir.comcomcomPCB does not match with the machine serial number information in the MCTL PCB     copir     copir.comcom
P96     copir     copir     copir.comcomcom171    TPH resistance value not input     copir     copir.comcom
P96     copir     copir     copir.comcomcom172    Scanner adjustment not completed     copir     copir.comcom
P96     copir     copir     copir.comcomcom433    Paper size width potentiometer test     copir     copir     copir.comcomcommode setting is not completed     copir     copir.comcom
P96     copir     copir     copir.comcomcom569    Either the print drum color information or ink category information is still not input     copir     copir.comcom
P96     copir     copir     copir.comcomcom613    Print pressure data missing     copir     copir.comcom
P98     copir     copir     copir.comcomcom119    Image processing PCB trouble     copir     copir.comcom
P98     copir     copir     copir.comcomcom120    Scanner communication problem     copir     copir.comcom (RZ3 series only)
P98     copir     copir     copir.comcomcom129    Faulty Scanner GA PCB     copir     copir.comcom (RZ3 series only)
P98     copir     copir     copir.comcomcom2    No reply from Mini     copir     copir     copir.comcomcomRosa PCB when the machine power is turned ON even though the Rosa connection signal is ON     copir     copir.comcom
P98     copir     copir     copir.comcomcom245    Master transfer time     copir     copir     copir.comcomcomout error during master making (Write pulse motor error)     copir     copir.comcom
P98     copir     copir     copir.comcomcom246    Master transfer time     copir     copir     copir.comcomcomout error during master making (Load pulse motor error)     copir     copir.comcom
P98     copir     copir     copir.comcomcom38    Machine data on EEPROM does not match with that on the SH     copir     copir     copir.comcomcomPCB
P98     copir     copir     copir.comcomcom39    Improper EEPROM on the SH     copir     copir     copir.comcomcomPCB     copir     copir.comcom
P98     copir     copir     copir.comcomcom46    The DIMM capacity does not match     copir     copir.comcom
P98     copir     copir     copir.comcomcom5    Hardware error     copir     copir.comcom
P98     copir     copir     copir.comcomcom51    Touch     copir     copir     copir.comcomcompanel communication error
P98     copir     copir     copir.comcomcom53    Failure in calling out the saved Memory settings (program, mode, user paper information)     copir     copir.comcom
P98     copir     copir     copir.comcomcom54    Failure in saving the Memory settings (program, mode, user paper information)     copir     copir.comcom
P98     copir     copir     copir.comcomcom55    Machine type code from SH     copir     copir     copir.comcomcomPCB does not match with the machine information on the H8     copir     copir     copir.comcomcomPCB     copir     copir.comcom
P98     copir     copir     copir.comcomcom6    FRAM checksum error     copir     copir.comcom
P98     copir     copir     copir.comcomcom614    Vertical print position data missing     copir     copir.comcom
P98     copir     copir     copir.comcomcom63    The test     copir     copir     copir.comcomcommode memory data stored was outside the adjustment range     copir     copir.comcom
P98     copir     copir     copir.comcomcom64    An undefined command was sent in communication between SH     copir     copir     copir.comcomcomPCB and MCTL PCB     copir     copir.comcom
P98     copir     copir     copir.comcomcom65    Communication error 01 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (MCTL PCB side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom67    Communication error 03 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (MCTL PCB side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom68    Communication error 04 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (MCTL PCB side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom69    Communication error 05 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (MCTL PCB side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom7    Mini Rosa PCB not connected     copir     copir.comcom
P98     copir     copir     copir.comcomcom70    Communication error 06 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (MCTL PCB side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom71    Communication error 07 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (MCTL PCB side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom72    Communication error 08 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (MCTL PCB side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom73    Communication error 09 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (MCTL PCB side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom74    Communication error 10 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom75    Communication error 11 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom76    Communication error 12 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom77    Communication error 13 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom78    Communication error 14 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom79    Communication error 15 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom80    Communication error 16 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom81    Communication error 17 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom82    Communication error 18 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom83    Communication error 19 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
A01-202    Master-positioning sensor does not go OFF even when the write pulse motor is reversed during the master-positioning or at start ofmaster-making operation     copir.com
A01-206    Timeout error during master-making operation
A01-211    Master-positioning sensor is ON during standby     copir.com
A01-214    Master-positioning sensor is ON at the start of master making     copir.com
A01-215    Faulty gate-array control for the write pulse motor (motor does not stop within set time)
A02-509    Master-loading sensor was OFF when the master was checked at a specified drum angle during the master-loading oper201ation     copir.com
A04-303    Master-disposal jam sensor was OFF at both 120 and 180 degrees drum angle     copir.com
A04-314    Master-disposal error (recovery error)     copir.com
A05-304    Master-disposal jam sensor was ON at the completion of the master-disposal operation     copir.com
A05-312    The master-disposal jam sensor was ON at the start of master-making operation     copir.com
A05-315    The master-disposal jam sensor was ON when the master disposal box was set in the machine     copir.com
A06-403    Paper-feed-tray upper or lower safety switch is OFF     copir.com
A07-409    Paper-ejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Papermisfeed)     copir.com
A07-412    Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed)     copir.com
A07-413    Paper sensor was ON when the paper should have left the paper sensor (long-length paper mode error)     copir.com
A07-418    The paper sensor was ON at the start of machine operation when the START button was pressed     copir.com
A07-429    Paper feed error (recovery error)     copir.com
A07-432    Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed     copir.com
A08-410    Paper-ejection sensor was OFF when paper should have arrived, and the paper sensor was OFF when the machine stopped (paper jamon the print drum)     copir.com
A08-421    Paper sensor was ON when the paper should have left the paper sensor during feeding of long paper in long-length paper mode (paperlonger than 555 mm)     copir.com
A08-430    Paper jam on print drum (recovery error)     copir.com
A09-411    Paper-ejection sensor was ON when the paper should have left the paper-ejection sensor     copir.com
A09-417    Paper-ejection sensor was ON at the start of machine operation when the START button was pressed     copir.com
A09-431    Paper-ejection error (recovery error)     copir.com
A10-102    Original-registration-sensor remaining jam
A10-103    Original-IN-sensor remaining jam
A10-105    Original-registration-sensor non-arrival jam
A10-106    Original-IN-sensor non-arrival jam
A10-107    Original-OUT-sensor non-arrival jam
A10-109    An original feed error occurred, due to opening the AF     copir.com
A10-162    No original in AF during AF master making     copir.com
A16-525    Waiting for the master to be removed     copir.com
A17-209    Cutter home-position switch is OFF at the start of master-making or master-set operation     copir.com
A34-218    Request to resetting the master     copir.com
B01-730    Keycard counter: No card
B22-721    With the “Tape separation” function set ON, no power is supplied to the job separator when start key is pressed     copir.com
B22-727    After cluster-A signal turned ON, BUSY-signal stayed "L" more than 7 seconds (power to job separator was turned OFF while the tape isbeing ejected     copir.com
B23-722    With the “Tape separation” function set ON, no tape detected in the job separator when the start key is pressed     copir.com
B23-723    No tape remains in job separator upon completion of the tape-ejection operation     copir.com
B24-724    Tape jam detected when the start key is pressed with the “Tape separation” function set to ON     copir.com
B24-725    Job separator tape-jam detection signal is “H” within 1,200 milliseconds after the cluster-A signal turns ON (tape misfeed)     copir.com
B24-726    Job separator tape-jam detection signal is “L” when the BUSY signal changes from “L” to “H” (or after 7 sec     copir.com at “L”) after the cluster-Asignal goes ON (tape misfeed)     copir.com
B31-916    Network cable is not connected when the machine is powered ON     copir.com
B32-917    Communication error on the network     copir.com
B32-920    Error detected by Network Interface Card (NIC) - NAK (negative acknowledgement was received)     copir.com
B33-931    DHCP server is not found with DHCP ON     copir.com
B34-919    Error detected on the locally connected printer     copir.com
C01-512    The ink sensor did not go ON even when inking was performed for the preset period     copir.com
C01-563    Ink remaining amount is zero     copir.com
C01-574    Inkless error was detected 5 times consecutively on one same ink bottle     copir.com
C02-200    The master end was detected twice in succession at 10-milliseconds intervals during master transport     copir.com
C02-240    Master remaining amount is zero
C03-308    Compression detection position was reached before the master-compression-motor encoder-sensor count reached the specified level,after the master compression motor turned ON in the compression direction     copir.com
C03-313    Master removal box full detected by the master removal count     copir.com
C04-402    Paper detection sensor is OFF (no paper on the feed tray)     copir.com
D01-526    Print drum is not set in the machine (drum connection signal, drum safety switch, and drum-lock sensor is OFF     copir.com
D01-527    Print drum connection signal is OFF when the print drum was inserted in the machine     copir.com
D01-528    Print drum safety switch is OFF when the print drum was inserted in the machine     copir.com
D01-529    Print drum lock sensor is OFF when the print drum was inserted in the machine (time-out: 5 seconds)     copir.com
D01-530    Print drum connection signal does not go OFF within 5 seconds after the print drum safety switch went OFF when the print drum waspulled out     copir.com
D02-532    Incorrect print drum is used     copir.com
D03-533    Ink cartridge set sensor is OFF     copir.com
D04-534    Incorrect ink cartridge is used     copir.com
D04-560    Ink TAG is not detected on ink bottle     copir.com
D04-561    Ink cartridge communication error (communication with the ink cartridge was interfered by noise)     copir.com
D04-562    Wrong ink cartridge information     copir.com
D04-564    Detected a mismatch in ink cartridge information
D05-210    Master detection sensor is OFF (not detecting master)     copir.com
D07-310    Disposal-box safety switch is OFF     copir.com
D08-224    Master making unit is not set (both the safety switch and lock sensor are OFF)     copir.com
D08-226    Master making unit safety switch is still OFF when the master making unit is set in position     copir.com
D08-227    Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds)     copir.com
D08-228    Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit waspulled out of the machine     copir.com
D09-212    Master-making-unit set sensor is OFF (sensor light path is free)     copir.com
D11-535    Front cover set switch is OFF     copir.com
D13-9    The rear cover is opened (serviceman safety switch is OFF)     copir.com
D17-236    Incorrect master roll     copir.com
D17-237    Master roll undetected     copir.com
D17-238    Master roll communication error     copir.com
D17-239    Wrong master roll detected     copir.com
D17-241    Detected a mismatch in master roll information     copir.com
D18-522    Print drum ready for release (solenoid is ON)     copir.com
D19-223    Master making unit ready for release (solenoid is ON)     copir.com
D22-540    Error in access to the Drum PCB (unable to read from or write on the Drum PCB)     copir.com
D22-542    Abnormal data on Drum PCB     copir.com
E01-10    Battery voltage was less than 2     copir.com5 V when the power was switched ON (weak battery: time to replace battery)     copir.com
E02-11    Master counter reached the value set for the maintenance call (value set by test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02-12    Copy counter reached the value set for the maintenance call (value by set test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02-22    Maintenance counter inside the print drum reached the value set for the maintenance call (value set by test mode)     copir.com [The messageappears when either the power is turned ON, the unit is reset, or when the machine operation ended     copir.com]
F01-15    There is no master on the print drum at the start of printing     copir.com
F02-18    Paper size does not match with the image size on the print drum at the start of printing     copir.com
F03-16    Multi-up was selected using custom size paper     copir.com
F05-19    In master making, the print quantity selected is less than the minimum print quantity     copir.com
F10-21    Paper size does not match with the size of image on the print drum when test print is selected and activated     copir.com
F21-32    Next original is not in placed on AF for multi-up operation     copir.com
F22-33    Next original is not placed on flatbed for multi-up operation     copir.com
F37-50    Original was set on the AF with book mode selected, when master making is activated     copir.com
F50-910    Auto-printer-selection is disabled due to error on linked printer     copir.com
F54-923    Auto-printer-selection is disabled due to no paper in the linked printer     copir.com
F55-924    Auto-printer-selection is disabled while receiving print data from PC     copir.com
F58-927    Cannot print from linked printer (Initializing NET-C)     copir.com
H1-566    Requesting ink color information input (Ink-TAG related)     copir.com
H2-567    Requesting print density information input (Ink-TAG related)     copir.com
H3-568    Requesting test printing print density information input (Ink-TAG related)     copir.com
H4-242    Requesting master-making density information input (Master-TAG related)     copir.com
H5-243    Requesting Print density information input (Master-TAG related)     copir.com
H6-244    Requesting test printing print density information input (Master-TAG related)     copir.com
P01-520    Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates     copir.com
P01-521    B-positioning sensor status does not change even after 3,033 pulses after the main motor activates     copir.com
P01-524    Clamp unit is not at the home position while the print drum is in operation (except during master disposal)     copir.com
P01-537    Print drum failed to stop at position B     copir.com (over-run)
P01-538    Print drum is not locked during operation     copir.com (Print-drum lock position sensor: OFF)
P02-400    Both the upper and lower limit sensors were ON at the same time     copir.com
P02-401    Overload current was detected in the elevator motor     copir.com
P02-404    The lower-limit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower-limitposition     copir.com
P02-405    The upper-limit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction     copir.com
P02-406    The upper-limit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper-limitposition     copir.com
P02-407    The lower-limit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction     copir.com
P02-408    The upper-limit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray     copir.com
P03-500    Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement     copir.com
P03-501    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the correct direction     copir.com
P03-502    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction     copir.com
P03-503    Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement     copir.com
P03-504    At the start of Clamp plate open/close action, the the detection sequence of clamp-sensors A & B is abnormal     copir.com
P03-505    At the start of print drum Positon-A compensation movement, the detection sequence of clamp-sensors A & B is abnormal     copir.com
P03-506    At the start of Clamp unit Home-positioning movement, the detection sequence of clamp-sensors A & B is abnormal     copir.com
P03-507    Clamp sensor A is ON after the clamp release action is completed     copir.com
P03-508    Clamp sensor A is ON after the A-position compensating movement is completed     copir.com
P03-545    Clamp unit is not in the home position while the print drum is in movement (cause due to the clamp motor)     copir.com
P04-513    The overflow sensor was ON for a set number of times in succession during the 10-millisecond-interval overflow-sensor check     copir.com
P05-603    The vertical-centering sensor does not switch ON even when the vertical-positioning pulse motor activated in the image-down direction for5 seconds during vertical home positioning movement     copir.com
P05-604    The vertical-centering sensor does not switch OFF even when the vertical-positioning pulse motor activated in the image-up direction for 5seconds during vertical home positioning movement     copir.com
P05-605    Even though the vertical positioning motor stopped according to the vertical centering sensor detection, the stopping position does notcorrespond with the programmed position     copir.com (GA control error)     copir.com
P05-612    The one-step-positioning key was pressed with vertical-print-position information undefined     copir.com
P08-951    Print job executed was not in correct RisoRinc format     copir.com
P11-600    Print pressure HP sensor does not switch ON within 3     copir.com9 seconds after the print pressure pulse motor activated towards higher pressureduring home positioning operation     copir.com
P11-601    Print pressure HP sensor does not switch OFF within 4     copir.com6 seconds after the print pressure pulse motor activated towards lower pressureduring home positioning operation     copir.com
P11-602    Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping positiondoes not correspond with the programmed position     copir.com (GA control error)     copir.com
P12-300    Overload current was detected in the master removal motor     copir.com
P12-301    Master compression motor lock when moving compression plate up     copir.com
P12-305    Master compression sensor does not go ON within 6     copir.com5 seconds after the master compression motor operates in the return direction     copir.com
P12-306    Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction     copir.com
P12-307    Master compression plate maximum position is not detected within 6     copir.com5 seconds after the master compression motor operates in thecompress direction     copir.com
P12-309    Master-compression-motor encoder sensor count did not change as the master compression motor activated in the compress directionand moved out from the home position     copir.com
P12-316    Master-compression-motor encoder sensor count did not change within 10 milliseconds after the master compression motor activated     copir.com
P13-203    Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated     copir.com
P13-204    Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated     copir.com
P13-205    Master-positioning sensor is ON when the print drum rotates through the preset angle following master cutting     copir.com
P13-221    Both the cutter HP switch and cutter stop position switch are ON at the same time     copir.com
P13-222    Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started     copir.com
P13-231    Cutter HP switch does not go OFF within 500 milliseconds after the cutter moved out from the home position     copir.com
P13-232    Cutter stop position switch does not go ON within 2 seconds after the cutting operation started     copir.com
P13-233    Cutter stop position switch does not go OFF within 500 milliseconds after the cutter activates to move from the stop position to the homeposition     copir.com
P13-234    Cutter HP switch does not go ON within 2 seconds after the cutter home positioning operation started     copir.com
P14-114    Incorrect main-unit data     copir.com
P14-115    The scanner operation is not completed within the set time     copir.com
P14-116    Timeout error for black shading compensation     copir.com (RZ3 series only)
P14-117    Timeout error for white shading compensation     copir.com (RZ3 series only)
P14-123    Offset adjustment not completed within set time     copir.com (RZ3 series only)
P14-124    Gain adjustment not completed within set time     copir.com (RZ3 series only)
P14-125    Offset adjustment not completed     copir.com
P14-126    Gain adjustment not completed     copir.com
P14-135    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14-136    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14-137    Malfunction detected during black shading compensation     copir.com (RZ3 series only)
P14-138    Malfunction detected during white shading compensation     copir.com (RZ3 series only)
P14-170    Even though the read pulse motor stopped according to the sensor detection, the stopping position does not correspond with theprogrammed position     copir.com (GA control error)     copir.com
P15-110    ABC (auto-base-control) timeout     copir.com The original does not move from the ABC scanning position on the AF unit     copir.com
P15-111    Operation command was made to the AF unit without 24 volts supplied to the AF unit     copir.com
P15-130    Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit     copir.com
P15-131    Riso printer received an undefined command from the AF unit     copir.com
P15-132    Riso printer detected communication sequence error from the AF unit     copir.com
P15-133    Communication error with AF unit (ACK or NAK error)     copir.com
P15-134    Riso printer could not send command to the AF unit within the set time     copir.com
P15-160    AF unit detection signal went OFF while the AF unit is in operation     copir.com
P15-4    Communication error with AF-CPU     copir.com
P17-20    Solenoid counter is not connected     copir.com
P18-531    Print drum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated     copir.com
P19-207    TPH pressure sensor does not go OFF within 2 seconds after the thermal-pressure motor activates in the decompressing direction, orduring home positioning operation     copir.com
P19-208    TPH pressure sensor does not go ON within 2 seconds after the thermal-pressure motor activates in the decompressing direction     copir.com
P19-216    TPH pressure sensor does not go OFF within 500 millisecond after the thermal-pressure motor activates in the compressing direction     copir.com
P19-217    TPH pressure sensor does not go ON within 2 seconds after the thermal-pressure motor activates in the compressing direction     copir.com
P20-415    Paper-ejection-wing home sensor does not go OFF within 7,000 milliseconds after the paper ejection wing motor activates in thecounterclockwise direction from the home position     copir.com
P20-416    Overload current was detected in the paper-ejection motor     copir.com
P20-437    Paper-ejection encoder sensor status does not change within 10 milliseconds after the paper-ejection motor is activated     copir.com
P24-539    Inking-motor encoder sensor status does not change within 20 milliseconds after the inking-motor is activated     copir.com
P25-26    Battery voltage was below 2     copir.com3 volts (too low) when the power is turned ON     copir.com
P92-570    EEPROM on the print drum PCB was being accessed while the print drum was in releasing action from the machine     copir.com
P93-932    No reply from the NET-C network interface card while accessing to the network interface card     copir.com
P93-933    No response from NET-C for 90 seconds during NET-C initialization     copir.com
P94-225    TPH code does not match with the machine code when the power is turned ON with the master-making unit in operating position or whenthe master-making unit is inserted in operating position while the power is ON     copir.com
P95-59    Machine serial-number information sent from SH-PCB does not match with the machine serial number information in the MCTL PCB     copir.com
P96-171    TPH resistance value not input     copir.com
P96-172    Scanner adjustment not completed     copir.com
P96-433    Paper size width potentiometer test-mode setting is not completed     copir.com
P96-569    Either the print drum color information or ink category information is still not input     copir.com
P96-613    Print pressure data missing     copir.com
P98-119    Image processing PCB trouble     copir.com
P98-120    Scanner communication problem     copir.com (RZ3 series only)
P98-129    Faulty Scanner GA PCB     copir.com (RZ3 series only)
P98-2    No reply from Mini-Rosa PCB when the machine power is turned ON even though the Rosa connection signal is ON     copir.com
P98-245    Master transfer time-out error during master making (Write pulse motor error)     copir.com
P98-246    Master transfer time-out error during master making (Load pulse motor error)     copir.com
P98-38    Machine data on EEPROM does not match with that on the SH-PCB
P98-39    Improper EEPROM on the SH-PCB     copir.com
P98-46    The DIMM capacity does not match     copir.com
P98-5    Hardware error     copir.com
P98-51    Touch-panel communication error
P98-53    Failure in calling out the saved Memory settings (program, mode, user paper information)     copir.com
P98-54    Failure in saving the Memory settings (program, mode, user paper information)     copir.com
P98-55    Machine type code from SH-PCB does not match with the machine information on the H8-PCB     copir.com
P98-6    FRAM checksum error     copir.com
P98-614    Vertical print position data missing     copir.com
P98-63    The test-mode memory data stored was outside the adjustment range     copir.com
P98-64    An undefined command was sent in communication between SH-PCB and MCTL PCB     copir.com
P98-65    Communication error 01 between SH-PCB and MCTL PCB (MCTL PCB side)     copir.com
P98-67    Communication error 03 between SH-PCB and MCTL PCB (MCTL PCB side)     copir.com
P98-68    Communication error 04 between SH-PCB and MCTL PCB (MCTL PCB side)     copir.com
P98-69    Communication error 05 between SH-PCB and MCTL PCB (MCTL PCB side)     copir.com
P98-7    Mini Rosa PCB not connected     copir.com
P98-70    Communication error 06 between SH-PCB and MCTL PCB (MCTL PCB side)     copir.com
P98-71    Communication error 07 between SH-PCB and MCTL PCB (MCTL PCB side)     copir.com
P98-72    Communication error 08 between SH-PCB and MCTL PCB (MCTL PCB side)     copir.com
P98-73    Communication error 09 between SH-PCB and MCTL PCB (MCTL PCB side)     copir.com
P98-74    Communication error 10 between SH-PCB and MCTL PCB (SH-PCB side)
P98-75    Communication error 11 between SH-PCB and MCTL PCB (SH-PCB side)
P98-76    Communication error 12 between SH-PCB and MCTL PCB (SH-PCB side)
P98-77    Communication error 13 between SH-PCB and MCTL PCB (SH-PCB side)
P98-78    Communication error 14 between SH-PCB and MCTL PCB (SH-PCB side)
P98-79    Communication error 15 between SH-PCB and MCTL PCB (SH-PCB side)
P98-80    Communication error 16 between SH-PCB and MCTL PCB (SH-PCB side)
P98-81    Communication error 17 between SH-PCB and MCTL PCB (SH-PCB side)
P98-82    Communication error 18 between SH-PCB and MCTL PCB (SH-PCB side)
P98-83    Communication error 19 between SH-PCB and MCTL PCB (SH-PCB side)
P98-84    Communication error 20 between SH-PCB and MCTL PCB (SH-PCB side)
P98-934    Main read/write communication error (detected by read/write side)     copir.com
P98-935    Main read/write communication error (detected by machine side)     copir.com
P98-937    Serial number data missing     copir.com
P98-938    FRAM version-down     copir.com
P98-947    24V-A does not go ON (a possible burnt 24-volt group-A fuse)     copir.com
P98-948    24V-B does not go ON (a possible burnt 24-volt group-B fuse)     copir.com
P98-949    24V-A does not go OFF     copir.com
P98-950    24V-B does not fo OFF     copir.com
P98-952    Checksum error on the ROSA flash-memory     copir.com
P98-953    Unsuccessful writing on the ROSA flash-memory     copir.com
P98-98    Machine serial number information on the SH-PCB EEPROM does not match with that in the FRAM     copir.com
P99-936    Software error
P98     copir     copir     copir.comcomcom84    Communication error 20 between SH     copir     copir     copir.comcomcomPCB and MCTL PCB (SH     copir     copir     copir.comcomcomPCB side)
P98     copir     copir     copir.comcomcom934    Main read/write communication error (detected by read/write side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom935    Main read/write communication error (detected by machine side)     copir     copir.comcom
P98     copir     copir     copir.comcomcom937    Serial number data missing     copir     copir.comcom
P98     copir     copir     copir.comcomcom938    FRAM version     copir     copir     copir.comcomcomdown     copir     copir.comcom
P98     copir     copir     copir.comcomcom947    24V     copir     copir     copir.comcomcomA does not go ON (a possible burnt 24     copir     copir     copir.comcomcomvolt group     copir     copir     copir.comcomcomA fuse)     copir     copir.comcom
P98     copir     copir     copir.comcomcom948    24V     copir     copir     copir.comcomcomB does not go ON (a possible burnt 24     copir     copir     copir.comcomcomvolt group     copir     copir     copir.comcomcomB fuse)     copir     copir.comcom
P98     copir     copir     copir.comcomcom949    24V     copir     copir     copir.comcomcomA does not go OFF     copir     copir.comcom
P98     copir     copir     copir.comcomcom950    24V     copir     copir     copir.comcomcomB does not fo OFF     copir     copir.comcom
P98     copir     copir     copir.comcomcom952    Checksum error on the ROSA flash     copir     copir     copir.comcomcommemory     copir     copir.comcom
P98     copir     copir     copir.comcomcom953    Unsuccessful writing on the ROSA flash     copir     copir     copir.comcomcommemory     copir     copir.comcom
P98     copir     copir     copir.comcomcom98    Machine serial number information on the SH     copir     copir     copir.comcomcomPCB EEPROM does not match with that in the FRAM     copir     copir.comcom
P99     copir     copir     copir.comcomcom936    Software error

سه شنبه, 31 فروردين 1395 22:47

ریسو گراف rz970

نوشته شده توسط

A01     copir     copir.comcom201    Master     copir     copir.comcompositioning sensor does not go ON even after the write pulse motor is activated during the master     copir     copir.comcompositioning, master     copir     copir.comcomcut, ormaster     copir     copir.comcomloading operation     copir.com
A01     copir     copir.comcom202    Master     copir     copir.comcompositioning sensor does not go OFF even when the write pulse motor is reversed during the master     copir     copir.comcompositioning or at start ofmaster     copir     copir.comcommaking operation     copir.com
A01     copir     copir.comcom206    Timeout error during master     copir     copir.comcommaking operation
A01     copir     copir.comcom211    Master     copir     copir.comcompositioning sensor is ON during standby     copir.com
A01     copir     copir.comcom214    Master     copir     copir.comcompositioning sensor is ON at the start of master making     copir.com
A01     copir     copir.comcom215    Faulty gate     copir     copir.comcomarray control for the write pulse motor (motor does not stop within set time)
A02     copir     copir.comcom509    Master     copir     copir.comcomloading sensor was OFF when the master was checked at a specified drum angle during the master     copir     copir.comcomloading oper201ation     copir.com
A04     copir     copir.comcom303    Master     copir     copir.comcomdisposal jam sensor was OFF at both 120 and 180 degrees drum angle     copir.com
A04     copir     copir.comcom314    Master     copir     copir.comcomdisposal error (recovery error)     copir.com
A05     copir     copir.comcom304    Master     copir     copir.comcomdisposal jam sensor was ON at the completion of the master     copir     copir.comcomdisposal operation     copir.com
A05     copir     copir.comcom312    The master     copir     copir.comcomdisposal jam sensor was ON at the start of master     copir     copir.comcommaking operation     copir.com
A05     copir     copir.comcom315    The master     copir     copir.comcomdisposal jam sensor was ON when the master disposal box was set in the machine     copir.com
A06     copir     copir.comcom403    Paper     copir     copir.comcomfeed     copir     copir.comcomtray upper or lower safety switch is OFF     copir.com
A07     copir     copir.comcom409    Paper     copir     copir.comcomejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Papermisfeed)     copir.com
A07     copir     copir.comcom412    Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed)     copir.com
A07     copir     copir.comcom413    Paper sensor was ON when the paper should have left the paper sensor (long     copir     copir.comcomlength paper mode error)     copir.com
A07     copir     copir.comcom418    The paper sensor was ON at the start of machine operation when the START button was pressed     copir.com
A07     copir     copir.comcom429    Paper feed error (recovery error)     copir.com
A07     copir     copir.comcom432    Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed     copir.com
A08     copir     copir.comcom410    Paper     copir     copir.comcomejection sensor was OFF when paper should have arrived, and the paper sensor was OFF when the machine stopped (paper jamon the print drum)     copir.com
A08     copir     copir.comcom421    Paper sensor was ON when the paper should have left the paper sensor during feeding of long paper in long     copir     copir.comcomlength paper mode (paperlonger than 555 mm)     copir.com
A08     copir     copir.comcom430    Paper jam on print drum (recovery error)     copir.com
A09     copir     copir.comcom411    Paper     copir     copir.comcomejection sensor was ON when the paper should have left the paper     copir     copir.comcomejection sensor     copir.com
A09     copir     copir.comcom417    Paper     copir     copir.comcomejection sensor was ON at the start of machine operation when the START button was pressed     copir.com
A09     copir     copir.comcom431    Paper     copir     copir.comcomejection error (recovery error)     copir.com
A10     copir     copir.comcom102    Original     copir     copir.comcomregistration     copir     copir.comcomsensor remaining jam
A10     copir     copir.comcom103    Original     copir     copir.comcomIN     copir     copir.comcomsensor remaining jam
A10     copir     copir.comcom105    Original     copir     copir.comcomregistration     copir     copir.comcomsensor non     copir     copir.comcomarrival jam
A10     copir     copir.comcom106    Original     copir     copir.comcomIN     copir     copir.comcomsensor non     copir     copir.comcomarrival jam
A10     copir     copir.comcom107    Original     copir     copir.comcomOUT     copir     copir.comcomsensor non     copir     copir.comcomarrival jam
A10     copir     copir.comcom109    An original feed error occurred, due to opening the AF     copir.com
A10     copir     copir.comcom162    No original in AF during AF master making     copir.com
A16     copir     copir.comcom525    Waiting for the master to be removed     copir.com
A17     copir     copir.comcom209    Cutter home     copir     copir.comcomposition switch is OFF at the start of master     copir     copir.comcommaking or master     copir     copir.comcomset operation     copir.com
A34     copir     copir.comcom218    Request to resetting the master     copir.com
B01     copir     copir.comcom730    Keycard counter: No card
B22     copir     copir.comcom721    With the “Tape separation” function set ON, no power is supplied to the job separator when start key is pressed     copir.com
B22     copir     copir.comcom727    After cluster     copir     copir.comcomA signal turned ON, BUSY     copir     copir.comcomsignal stayed "L" more than 7 seconds (power to job separator was turned OFF while the tape isbeing ejected     copir.com
B23     copir     copir.comcom722    With the “Tape separation” function set ON, no tape detected in the job separator when the start key is pressed     copir.com
B23     copir     copir.comcom723    No tape remains in job separator upon completion of the tape     copir     copir.comcomejection operation     copir.com
B24     copir     copir.comcom724    Tape jam detected when the start key is pressed with the “Tape separation” function set to ON     copir.com
B24     copir     copir.comcom725    Job separator tape     copir     copir.comcomjam detection signal is “H” within 1,200 milliseconds after the cluster     copir     copir.comcomA signal turns ON (tape misfeed)     copir.com
B24     copir     copir.comcom726    Job separator tape     copir     copir.comcomjam detection signal is “L” when the BUSY signal changes from “L” to “H” (or after 7 sec     copir.com at “L”) after the cluster     copir     copir.comcomAsignal goes ON (tape misfeed)     copir.com
B31     copir     copir.comcom916    Network cable is not connected when the machine is powered ON     copir.com
B32     copir     copir.comcom917    Communication error on the network     copir.com
B32     copir     copir.comcom920    Error detected by Network Interface Card (NIC)      copir     copir.comcom NAK (negative acknowledgement was received)     copir.com
B33     copir     copir.comcom931    DHCP server is not found with DHCP ON     copir.com
B34     copir     copir.comcom919    Error detected on the locally connected printer     copir.com
C01     copir     copir.comcom512    The ink sensor did not go ON even when inking was performed for the preset period     copir.com
C01     copir     copir.comcom563    Ink remaining amount is zero     copir.com
C01     copir     copir.comcom574    Inkless error was detected 5 times consecutively on one same ink bottle     copir.com
C02     copir     copir.comcom200    The master end was detected twice in succession at 10     copir     copir.comcommilliseconds intervals during master transport     copir.com
C02     copir     copir.comcom240    Master remaining amount is zero
C03     copir     copir.comcom308    Compression detection position was reached before the master     copir     copir.comcomcompression     copir     copir.comcommotor encoder     copir     copir.comcomsensor count reached the specified level,after the master compression motor turned ON in the compression direction     copir.com
C03     copir     copir.comcom313    Master removal box full detected by the master removal count     copir.com
C04     copir     copir.comcom402    Paper detection sensor is OFF (no paper on the feed tray)     copir.com
D01     copir     copir.comcom526    Print drum is not set in the machine (drum connection signal, drum safety switch, and drum     copir     copir.comcomlock sensor is OFF     copir.com
D01     copir     copir.comcom527    Print drum connection signal is OFF when the print drum was inserted in the machine     copir.com
D01     copir     copir.comcom528    Print drum safety switch is OFF when the print drum was inserted in the machine     copir.com
D01     copir     copir.comcom529    Print drum lock sensor is OFF when the print drum was inserted in the machine (time     copir     copir.comcomout: 5 seconds)     copir.com
D01     copir     copir.comcom530    Print drum connection signal does not go OFF within 5 seconds after the print drum safety switch went OFF when the print drum waspulled out     copir.com
D02     copir     copir.comcom532    Incorrect print drum is used     copir.com
D03     copir     copir.comcom533    Ink cartridge set sensor is OFF     copir.com
D04     copir     copir.comcom534    Incorrect ink cartridge is used     copir.com
D04     copir     copir.comcom560    Ink TAG is not detected on ink bottle     copir.com
D04     copir     copir.comcom561    Ink cartridge communication error (communication with the ink cartridge was interfered by noise)     copir.com
D04     copir     copir.comcom562    Wrong ink cartridge information     copir.com
D04     copir     copir.comcom564    Detected a mismatch in ink cartridge information
D05     copir     copir.comcom210    Master detection sensor is OFF (not detecting master)     copir.com
D07     copir     copir.comcom310    Disposal     copir     copir.comcombox safety switch is OFF     copir.com
D08     copir     copir.comcom224    Master making unit is not set (both the safety switch and lock sensor are OFF)     copir.com
D08     copir     copir.comcom226    Master making unit safety switch is still OFF when the master making unit is set in position     copir.com
D08     copir     copir.comcom227    Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds)     copir.com
D08     copir     copir.comcom228    Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit waspulled out of the machine     copir.com
D09     copir     copir.comcom212    Master     copir     copir.comcommaking     copir     copir.comcomunit set sensor is OFF (sensor light path is free)     copir.com
D11     copir     copir.comcom535    Front cover set switch is OFF     copir.com
D13     copir     copir.comcom9    The rear cover is opened (serviceman safety switch is OFF)     copir.com
D17     copir     copir.comcom236    Incorrect master roll     copir.com
D17     copir     copir.comcom237    Master roll undetected     copir.com
D17     copir     copir.comcom238    Master roll communication error     copir.com
D17     copir     copir.comcom239    Wrong master roll detected     copir.com
D17     copir     copir.comcom241    Detected a mismatch in master roll information     copir.com
D18     copir     copir.comcom522    Print drum ready for release (solenoid is ON)     copir.com
D19     copir     copir.comcom223    Master making unit ready for release (solenoid is ON)     copir.com
D22     copir     copir.comcom540    Error in access to the Drum PCB (unable to read from or write on the Drum PCB)     copir.com
D22     copir     copir.comcom542    Abnormal data on Drum PCB     copir.com
E01     copir     copir.comcom10    Battery voltage was less than 2     copir.com5 V when the power was switched ON (weak battery: time to replace battery)     copir.com
E02     copir     copir.comcom11    Master counter reached the value set for the maintenance call (value set by test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir     copir.comcom12    Copy counter reached the value set for the maintenance call (value by set test mode)     copir.com [The message appears when either the power isturned ON, the unit is reset, or when the machine operation ended     copir.com]
E02     copir     copir.comcom22    Maintenance counter inside the print drum reached the value set for the maintenance call (value set by test mode)     copir.com [The messageappears when either the power is turned ON, the unit is reset, or when the machine operation ended     copir.com]
F01     copir     copir.comcom15    There is no master on the print drum at the start of printing     copir.com
F02     copir     copir.comcom18    Paper size does not match with the image size on the print drum at the start of printing     copir.com
F03     copir     copir.comcom16    Multi     copir     copir.comcomup was selected using custom size paper     copir.com
F05     copir     copir.comcom19    In master making, the print quantity selected is less than the minimum print quantity     copir.com
F10     copir     copir.comcom21    Paper size does not match with the size of image on the print drum when test print is selected and activated     copir.com
F21     copir     copir.comcom32    Next original is not in placed on AF for multi     copir     copir.comcomup operation     copir.com
F22     copir     copir.comcom33    Next original is not placed on flatbed for multi     copir     copir.comcomup operation     copir.com
F37     copir     copir.comcom50    Original was set on the AF with book mode selected, when master making is activated     copir.com
F50     copir     copir.comcom910    Auto     copir     copir.comcomprinter     copir     copir.comcomselection is disabled due to error on linked printer     copir.com
F54     copir     copir.comcom923    Auto     copir     copir.comcomprinter     copir     copir.comcomselection is disabled due to no paper in the linked printer     copir.com
F55     copir     copir.comcom924    Auto     copir     copir.comcomprinter     copir     copir.comcomselection is disabled while receiving print data from PC     copir.com
F58     copir     copir.comcom927    Cannot print from linked printer (Initializing NET     copir     copir.comcomC)     copir.com
H1     copir     copir.comcom566    Requesting ink color information input (Ink     copir     copir.comcomTAG related)     copir.com
H2     copir     copir.comcom567    Requesting print density information input (Ink     copir     copir.comcomTAG related)     copir.com
H3     copir     copir.comcom568    Requesting test printing print density information input (Ink     copir     copir.comcomTAG related)     copir.com
H4     copir     copir.comcom242    Requesting master     copir     copir.comcommaking density information input (Master     copir     copir.comcomTAG related)     copir.com
H5     copir     copir.comcom243    Requesting Print density information input (Master     copir     copir.comcomTAG related)     copir.com
H6     copir     copir.comcom244    Requesting test printing print density information input (Master     copir     copir.comcomTAG related)     copir.com
P01     copir     copir.comcom520    Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates     copir.com
P01     copir     copir.comcom521    B     copir     copir.comcompositioning sensor status does not change even after 3,033 pulses after the main motor activates     copir.com
P01     copir     copir.comcom524    Clamp unit is not at the home position while the print drum is in operation (except during master disposal)     copir.com
P01     copir     copir.comcom537    Print drum failed to stop at position B     copir.com (over     copir     copir.comcomrun)
P01     copir     copir.comcom538    Print drum is not locked during operation     copir.com (Print     copir     copir.comcomdrum lock position sensor: OFF)
P02     copir     copir.comcom400    Both the upper and lower limit sensors were ON at the same time     copir.com
P02     copir     copir.comcom401    Overload current was detected in the elevator motor     copir.com
P02     copir     copir.comcom404    The lower     copir     copir.comcomlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower     copir     copir.comcomlimitposition     copir.com
P02     copir     copir.comcom405    The upper     copir     copir.comcomlimit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction     copir.com
P02     copir     copir.comcom406    The upper     copir     copir.comcomlimit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper     copir     copir.comcomlimitposition     copir.com
P02     copir     copir.comcom407    The lower     copir     copir.comcomlimit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction     copir.com
P02     copir     copir.comcom408    The upper     copir     copir.comcomlimit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray     copir.com
P03     copir     copir.comcom500    Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement     copir.com
P03     copir     copir.comcom501    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the correct direction     copir.com
P03     copir     copir.comcom502    Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction     copir.com
P03     copir     copir.comcom503    Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement     copir.com
P03     copir     copir.comcom504    At the start of Clamp plate open/close action, the the detection sequence of clamp     copir     copir.comcomsensors A & B is abnormal     copir.com
P03     copir     copir.comcom505    At the start of print drum Positon     copir     copir.comcomA compensation movement, the detection sequence of clamp     copir     copir.comcomsensors A & B is abnormal     copir.com
P03     copir     copir.comcom506    At the start of Clamp unit Home     copir     copir.comcompositioning movement, the detection sequence of clamp     copir     copir.comcomsensors A & B is abnormal     copir.com
P03     copir     copir.comcom507    Clamp sensor A is ON after the clamp release action is completed     copir.com
P03     copir     copir.comcom508    Clamp sensor A is ON after the A     copir     copir.comcomposition compensating movement is completed     copir.com
P03     copir     copir.comcom545    Clamp unit is not in the home position while the print drum is in movement (cause due to the clamp motor)     copir.com
P04     copir     copir.comcom513    The overflow sensor was ON for a set number of times in succession during the 10     copir     copir.comcommillisecond     copir     copir.comcominterval overflow     copir     copir.comcomsensor check     copir.com
P05     copir     copir.comcom603    The vertical     copir     copir.comcomcentering sensor does not switch ON even when the vertical     copir     copir.comcompositioning pulse motor activated in the image     copir     copir.comcomdown direction for5 seconds during vertical home positioning movement     copir.com
P05     copir     copir.comcom604    The vertical     copir     copir.comcomcentering sensor does not switch OFF even when the vertical     copir     copir.comcompositioning pulse motor activated in the image     copir     copir.comcomup direction for 5seconds during vertical home positioning movement     copir.com
P05     copir     copir.comcom605    Even though the vertical positioning motor stopped according to the vertical centering sensor detection, the stopping position does notcorrespond with the programmed position     copir.com (GA control error)     copir.com
P05     copir     copir.comcom612    The one     copir     copir.comcomstep     copir     copir.comcompositioning key was pressed with vertical     copir     copir.comcomprint     copir     copir.comcomposition information undefined     copir.com
P08     copir     copir.comcom951    Print job executed was not in correct RisoRinc format     copir.com
P11     copir     copir.comcom600    Print pressure HP sensor does not switch ON within 3     copir.com9 seconds after the print pressure pulse motor activated towards higher pressureduring home positioning operation     copir.com
P11     copir     copir.comcom601    Print pressure HP sensor does not switch OFF within 4     copir.com6 seconds after the print pressure pulse motor activated towards lower pressureduring home positioning operation     copir.com
P11     copir     copir.comcom602    Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping positiondoes not correspond with the programmed position     copir.com (GA control error)     copir.com
P12     copir     copir.comcom300    Overload current was detected in the master removal motor     copir.com
P12     copir     copir.comcom301    Master compression motor lock when moving compression plate up     copir.com
P12     copir     copir.comcom305    Master compression sensor does not go ON within 6     copir.com5 seconds after the master compression motor operates in the return direction     copir.com
P12     copir     copir.comcom306    Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction     copir.com
P12     copir     copir.comcom307    Master compression plate maximum position is not detected within 6     copir.com5 seconds after the master compression motor operates in thecompress direction     copir.com
P12     copir     copir.comcom309    Master     copir     copir.comcomcompression     copir     copir.comcommotor encoder sensor count did not change as the master compression motor activated in the compress directionand moved out from the home position     copir.com
P12     copir     copir.comcom316    Master     copir     copir.comcomcompression     copir     copir.comcommotor encoder sensor count did not change within 10 milliseconds after the master compression motor activated     copir.com
P13     copir     copir.comcom203    Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated     copir.com
P13     copir     copir.comcom204    Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated     copir.com
P13     copir     copir.comcom205    Master     copir     copir.comcompositioning sensor is ON when the print drum rotates through the preset angle following master cutting     copir.com
P13     copir     copir.comcom221    Both the cutter HP switch and cutter stop position switch are ON at the same time     copir.com
P13     copir     copir.comcom222    Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started     copir.com
P13     copir     copir.comcom231    Cutter HP switch does not go OFF within 500 milliseconds after the cutter moved out from the home position     copir.com
P13     copir     copir.comcom232    Cutter stop position switch does not go ON within 2 seconds after the cutting operation started     copir.com
P13     copir     copir.comcom233    Cutter stop position switch does not go OFF within 500 milliseconds after the cutter activates to move from the stop position to the homeposition     copir.com
P13     copir     copir.comcom234    Cutter HP switch does not go ON within 2 seconds after the cutter home positioning operation started     copir.com
P14     copir     copir.comcom114    Incorrect main     copir     copir.comcomunit data     copir.com
P14     copir     copir.comcom115    The scanner operation is not completed within the set time     copir.com
P14     copir     copir.comcom116    Timeout error for black shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom117    Timeout error for white shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom123    Offset adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir     copir.comcom124    Gain adjustment not completed within set time     copir.com (RZ3 series only)
P14     copir     copir.comcom125    Offset adjustment not completed     copir.com
P14     copir     copir.comcom126    Gain adjustment not completed     copir.com
P14     copir     copir.comcom135    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir     copir.comcom136    Malfunction detected during offset adjustment     copir.com (RZ3 series only)
P14     copir     copir.comcom137    Malfunction detected during black shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom138    Malfunction detected during white shading compensation     copir.com (RZ3 series only)
P14     copir     copir.comcom170    Even though the read pulse motor stopped according to the sensor detection, the stopping position does not correspond with theprogrammed position     copir.com (GA control error)     copir.com
P15     copir     copir.comcom110    ABC (auto     copir     copir.comcombase     copir     copir.comcomcontrol) timeout     copir.com The original does not move from the ABC scanning position on the AF unit     copir.com
P15     copir     copir.comcom111    Operation command was made to the AF unit without 24 volts supplied to the AF unit     copir.com
P15     copir     copir.comcom130    Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit     copir.com
P15     copir     copir.comcom131    Riso printer received an undefined command from the AF unit     copir.com
P15     copir     copir.comcom132    Riso printer detected communication sequence error from the AF unit     copir.com
P15     copir     copir.comcom133    Communication error with AF unit (ACK or NAK error)     copir.com
P15     copir     copir.comcom134    Riso printer could not send command to the AF unit within the set time     copir.com
P15     copir     copir.comcom160    AF unit detection signal went OFF while the AF unit is in operation     copir.com
P15     copir     copir.comcom4    Communication error with AF     copir     copir.comcomCPU     copir.com
P17     copir     copir.comcom20    Solenoid counter is not connected     copir.com
P18     copir     copir.comcom531    Print drum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated     copir.com
P19     copir     copir.comcom207    TPH pressure sensor does not go OFF within 2 seconds after the thermal     copir     copir.comcompressure motor activates in the decompressing direction, orduring home positioning operation     copir.com
P19     copir     copir.comcom208    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir     copir.comcompressure motor activates in the decompressing direction     copir.com
P19     copir     copir.comcom216    TPH pressure sensor does not go OFF within 500 millisecond after the thermal     copir     copir.comcompressure motor activates in the compressing direction     copir.com
P19     copir     copir.comcom217    TPH pressure sensor does not go ON within 2 seconds after the thermal     copir     copir.comcompressure motor activates in the compressing direction     copir.com
P20     copir     copir.comcom415    Paper     copir     copir.comcomejection     copir     copir.comcomwing home sensor does not go OFF within 7,000 milliseconds after the paper ejection wing motor activates in thecounterclockwise direction from the home position     copir.com
P20     copir     copir.comcom416    Overload current was detected in the paper     copir     copir.comcomejection motor     copir.com
P20     copir     copir.comcom437    Paper     copir     copir.comcomejection encoder sensor status does not change within 10 milliseconds after the paper     copir     copir.comcomejection motor is activated     copir.com
P24     copir     copir.comcom539    Inking     copir     copir.comcommotor encoder sensor status does not change within 20 milliseconds after the inking     copir     copir.comcommotor is activated     copir.com
P25     copir     copir.comcom26    Battery voltage was below 2     copir.com3 volts (too low) when the power is turned ON     copir.com
P92     copir     copir.comcom570    EEPROM on the print drum PCB was being accessed while the print drum was in releasing action from the machine     copir.com
P93     copir     copir.comcom932    No reply from the NET     copir     copir.comcomC network interface card while accessing to the network interface card     copir.com
P93     copir     copir.comcom933    No response from NET     copir     copir.comcomC for 90 seconds during NET     copir     copir.comcomC initialization     copir.com
P94     copir     copir.comcom225    TPH code does not match with the machine code when the power is turned ON with the master     copir     copir.comcommaking unit in operating position or whenthe master     copir     copir.comcommaking unit is inserted in operating position while the power is ON     copir.com
P95     copir     copir.comcom59    Machine serial     copir     copir.comcomnumber information sent from SH     copir     copir.comcomPCB does not match with the machine serial number information in the MCTL PCB     copir.com
P96     copir     copir.comcom171    TPH resistance value not input     copir.com
P96     copir     copir.comcom172    Scanner adjustment not completed     copir.com
P96     copir     copir.comcom433    Paper size width potentiometer test     copir     copir.comcommode setting is not completed     copir.com
P96     copir     copir.comcom569    Either the print drum color information or ink category information is still not input     copir.com
P96     copir     copir.comcom613    Print pressure data missing     copir.com
P98     copir     copir.comcom119    Image processing PCB trouble     copir.com
P98     copir     copir.comcom120    Scanner communication problem     copir.com (RZ3 series only)
P98     copir     copir.comcom129    Faulty Scanner GA PCB     copir.com (RZ3 series only)
P98     copir     copir.comcom2    No reply from Mini     copir     copir.comcomRosa PCB when the machine power is turned ON even though the Rosa connection signal is ON     copir.com
P98     copir     copir.comcom245    Master transfer time     copir     copir.comcomout error during master making (Write pulse motor error)     copir.com
P98     copir     copir.comcom246    Master transfer time     copir     copir.comcomout error during master making (Load pulse motor error)     copir.com
P98     copir     copir.comcom38    Machine data on EEPROM does not match with that on the SH     copir     copir.comcomPCB
P98     copir     copir.comcom39    Improper EEPROM on the SH     copir     copir.comcomPCB     copir.com
P98     copir     copir.comcom46    The DIMM capacity does not match     copir.com
P98     copir     copir.comcom5    Hardware error     copir.com
P98     copir     copir.comcom51    Touch     copir     copir.comcompanel communication error
P98     copir     copir.comcom53    Failure in calling out the saved Memory settings (program, mode, user paper information)     copir.com
P98     copir     copir.comcom54    Failure in saving the Memory settings (program, mode, user paper information)     copir.com
P98     copir     copir.comcom55    Machine type code from SH     copir     copir.comcomPCB does not match with the machine information on the H8     copir     copir.comcomPCB     copir.com
P98     copir     copir.comcom6    FRAM checksum error     copir.com
P98     copir     copir.comcom614    Vertical print position data missing     copir.com
P98     copir     copir.comcom63    The test     copir     copir.comcommode memory data stored was outside the adjustment range     copir.com
P98     copir     copir.comcom64    An undefined command was sent in communication between SH     copir     copir.comcomPCB and MCTL PCB     copir.com
P98     copir     copir.comcom65    Communication error 01 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom67    Communication error 03 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom68    Communication error 04 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom69    Communication error 05 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom7    Mini Rosa PCB not connected     copir.com
P98     copir     copir.comcom70    Communication error 06 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom71    Communication error 07 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom72    Communication error 08 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom73    Communication error 09 between SH     copir     copir.comcomPCB and MCTL PCB (MCTL PCB side)     copir.com
P98     copir     copir.comcom74    Communication error 10 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom75    Communication error 11 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom76    Communication error 12 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom77    Communication error 13 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom78    Communication error 14 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom79    Communication error 15 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom80    Communication error 16 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom81    Communication error 17 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom82    Communication error 18 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom83    Communication error 19 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom84    Communication error 20 between SH     copir     copir.comcomPCB and MCTL PCB (SH     copir     copir.comcomPCB side)
P98     copir     copir.comcom934    Main read/write communication error (detected by read/write side)     copir.com
P98     copir     copir.comcom935    Main read/write communication error (detected by machine side)     copir.com
P98     copir     copir.comcom937    Serial number data missing     copir.com
P98     copir     copir.comcom938    FRAM version     copir     copir.comcomdown     copir.com
P98     copir     copir.comcom947    24V     copir     copir.comcomA does not go ON (a possible burnt 24     copir     copir.comcomvolt group     copir     copir.comcomA fuse)     copir.com
P98     copir     copir.comcom948    24V     copir     copir.comcomB does not go ON (a possible burnt 24     copir     copir.comcomvolt group     copir     copir.comcomB fuse)     copir.com
P98     copir     copir.comcom949    24V     copir     copir.comcomA does not go OFF     copir.com
P98     copir     copir.comcom950    24V     copir     copir.comcomB does not fo OFF     copir.com
P98     copir     copir.comcom952    Checksum error on the ROSA flash     copir     copir.comcommemory     copir.com
P98     copir     copir.comcom953    Unsuccessful writing on the ROSA flash     copir     copir.comcommemory     copir.com
P98     copir     copir.comcom98    Machine serial number information on the SH     copir     copir.comcomPCB EEPROM does not match with that in the FRAM     copir.com
P99     copir     copir.comcom936    Software error

صفحه1 از7

نماد اعتماد

اطلاعات تماس

 آدرس: آذربایجان شرقی، مراغه، خیایان امام، روبروی داروخانه جاوید، ساختمان کپی ایران
شماره تماس: 04137252392   |    04137254200
شماره تماس: 04137253033   |   04137253034
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید.این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید|این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت داریدساعات کاری: از 8 الی 22 شب