لمینت MKP
1402-06-04
Menu
0000 Unknown jam
فتوکپی کانون Other errors
0007 Initial stationary SR2002, SR2003, SR2004
فتوکپی کانون Paper is detected in the transport path before the ADF starts initial operation copyir.com
0008 Document edge sensor delay jam SR2002
فتوکپی کانون The document edge sensor does not detect paper when the paper has been fed by the predetermined distance since reception of a pickup request copyir.com
0009 Document edge sensor stationary jam SR2002
فتوکپی کانون The trailing edge of paper is not detected when the paper has been fed by the predetermined distance since detection of it by the document edge sensor
000a Paper absence (Pull out the document copyir.com) SR2001
فتوکپی کانون The Document set sensor has been held off since start of pickup copyir.com
000c Delivery delay jam SR2002
فتوکپی کانون In case the internal software signal “Delivery Sensor OFF” set in the system cannot be detected, when the leading edge of paper is detected by the document edge sensor and fed the prescribed distance, and after the paper’s trailing edge is detected copyir.com
000d Delivery stationary jam SR2002
فتوکپی کانون In case the internal software signal “Delivery Sensor ON” set in the system cannot be detected, when the paper feed request is received and the paper is fed the prescribed distance, and the leading edge of paper is detected and paper is fed the prescribed distance
0010 Pickup NG SR2003
فتوکپی کانون The registration sensor has been held off since paper pickup started copyir.com
0104 Pickup Delay Jam SR11
فتوکپی کانون After execution of a pickup retry, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time copyir.com Or after the duplex drive solenoid (SL1) is on, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time copyir.com
010c Delivery Sensor Delay Jam SR5
فتوکپی کانون After the registration sensor (SR11) has detected the leading edge of paper, the delivery sensor (SR5) does not detect the leading edge of paper within a specific period of time copyir.com
0208 Pickup Stationary Jam SR11
فتوکپی کانون After the registration sensor (SR11) has detected the leading edge of paper, the registration sensor (SR11) does not detect the trailing edge of paper within a specific period of time copyir.com
0210 Delivery Sensor Stationary Jam SR5
فتوکپی کانون The delivery sensor cannot detect absence of paper within the specified time after turning off of the registration clutch copyir.com فتوکپی کانون The delivery sensor cannot detect absence of paper within the specified time after the sensor detected the leading edge of paper copyir.com
0214 Stationary jam in machine SR5, SR9
فتوکپی کانون After the registration sensor (SR11) has detected the trailing edge of paper, the delivery sensor (SR5) does not detect the trailing edge of paper within a specific period of time copyir.com
021c Wound Paper Jam at Fuser SR5, SR11
فتوکپی کانون The delivery sensor (SR5) has detected absence of paper within the prescribed time after it detected presence of paper copyir.com
1118 Door open jam SR5, SR9, SR11, SW2
فتوکپی کانون The door was opened when there was printing paper in the transport path copyir.com
E000فتوکپی کانون 0000 Startup error
فتوکپی کانون The temperature detected by the main or sub thermistor does not rise to the specified value during startup control copyir.com فتوکپی کانون Check the fixing film connector copyir.com فتوکپی کانون Replace the fixing film unit copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E001فتوکپی کانون 0000 Abnormally high temperature (detected by main thermistor)
فتوکپی کانون The main thermistor detected an abnormally high temperature (235 deg C) during temperature control copyir.com فتوکپی کانون Check the connector of the fixing film unit copyir.com فتوکپی کانون Replace the fixing film unit copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E001فتوکپی کانون 0001 Abnormally high temperature (detected by sub thermistor)
فتوکپی کانون The sub thermistor detected an abnormally high temperature (300 deg C) during temperature control copyir.com فتوکپی کانون Check the connector of the fixing film unit copyir.com فتوکپی کانون Replace the fixing film unit copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E002فتوکپی کانون 0000 Low temperature during temperature control copyir.com
فتوکپی کانون The target temperature is not reached during temperature control copyir.com فتوکپی کانون Check the connector of the fixing film unit copyir.com فتوکپی کانون Replace the fixing film unit copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E003فتوکپی کانون 0000 Abnormally low temperature (detected by main thermistor)
فتوکپی کانون After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation copyir.com فتوکپی کانون Check the connector of the fixing film unit copyir.com فتوکپی کانون Replace the fixing film unit copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E003فتوکپی کانون 0001 Abnormally low temperature (detected by sub thermistor)
فتوکپی کانون After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation copyir.com فتوکپی کانون Check the connector of the fixing film unit copyir.com فتوکپی کانون Replace the fixing film unit copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E010فتوکپی کانون 0000 Main motor failure
فتوکپی کانون The main motor is faulty copyir.com فتوکپی کانون Check the connector of the main motor copyir.com فتوکپی کانون Replace the main motor copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E019فتوکپی کانون 0000 Waste toner full detection
فتوکپی کانون The waste toner full state was detected copyir.com Replace the drum unit
E019فتوکپی کانون 0001 Waster toner full detection sensor is faulty copyir.com
فتوکپی کانون The waste toner full state was detected continuously for five or more seconds while the main motor was turning copyir.com فتوکپی کانون Check the connector of the waster toner full sensor copyir.com فتوکپی کانون Replace the waste toner full sensor copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E100فتوکپی کانون 0000 BD detection PCB failure
فتوکپی کانون The BD detection PCB is faulty copyir.com فتوکپی کانون Check the connector of the BD detection PCB copyir.com فتوکپی کانون Replace the laser scanner unit copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E196فتوکپی کانون 0001 Flash ROM write/read error
فتوکپی کانون The write/read of Flash ROM in the image processor PCB is faulty copyir.com فتوکپی کانون Replace the image processor PCB copyir.com
E196فتوکپی کانون 0002 PCL ROM write/read error
فتوکپی کانون The write/read of PCL ROM in the image processor PCB is faulty copyir.com فتوکپی کانون Replace the PCL PCB copyir.com فتوکپی کانون Replace the image processor PCB copyir.com
E197فتوکپی کانون 0000 Printer engine communication error
فتوکپی کانون Erroneous communication between the DC controller PCB and image processor PCB was detected copyir.com فتوکپی کانون Check the connectors of the DC controller PCB and image processor PCB copyir.com فتوکپی کانون Replace the DC controller PCB for normal connection copyir.com فتوکپی کانون Replace the image processor PCB copyir.com
E716فتوکپی کانون 0000 Erroneous communication with optional cassette
فتوکپی کانون Disconnection of the optional cassette was detected after powerفتوکپی کانون on, detection of normal connection to the optional cassette, and start of communication copyir.com فتوکپی کانون Check the connectors of the optional cassette PCB and DC controller PCB copyir.com فتوکپی کانون Replace the optional cassette PCB for normal connection copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E719فتوکپی کانون 0000 Erroneous communication with card reader (serial communication)
فتوکپی کانون Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after powerفتوکپی کانون on) copyir.com
فتوکپی کانون A serial communication error has occurred copyir.com (The serial communication error cannot be recovered copyir.com) فتوکپی کانون Check the connectors of the card reader and image processor PCB copyir.com فتوکپی کانون Replace the card reader for normal connection copyir.com فتوکپی کانون Replace the image processor PCB copyir.com
E719فتوکپی کانون 0001 Erroneous communication with coin vendor (serial communication)
فتوکپی کانون Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after powerفتوکپی کانون on) copyir.com
فتوکپی کانون A serial communication error has occurred copyir.com (The serial communication error cannot be recovered copyir.com) فتوکپی کانون Check the connection between the image processor PCB and serial PCB copyir.com فتوکپی کانون Check the connectors of the serial PCB and coin vendor for normal connection copyir.com فتوکپی کانون Replace the serial PCB copyir.com فتوکپی کانون Check the coin vendor copyir.com فتوکپی کانون Replace the image processor PCB
E730فتوکپی کانون 0000 inside error of the image processor PCB (PDL system error)
فتوکپی کانون The inside of the image processor PCB is faulty copyir.com فتوکپی کانون Replace the image processor PCB copyir.com
E733فتوکپی کانون 0000 Erroneous communication between controller and printer
فتوکپی کانون Cannot communicate with the printer at startup فتوکپی کانون Check the connectors of the DC controller PCB and image processor PCB for normal connection copyir.com فتوکپی کانون Check the power supply of the printer (Check whether initialization is performed at startup) copyir.com فتوکپی کانون Replace the DC controller PCB or image processor PCB copyir.com
E736فتوکپی کانون 0000 CCU communication error
فتوکپی کانون The installed modem PCB is incompatible copyir.com فتوکپی کانون Check the connectors of the image processor PCB and modem copyir.com فتوکپی کانون Replace the modem PCB copyir.com فتوکپی کانون Replace the image processor PCB copyir.com
E739فتوکپی کانون 0000 Erroneous communication between controller and network board
فتوکپی کانون The installed network board is incompatible copyir.com فتوکپی کانون Check the connectors of the image processor PCB and LAN PCB for normal connection copyir.com فتوکپی کانون Replace the LAN PCB copyir.com فتوکپی کانون Replace the image processor PCB copyir.com
E805فتوکپی کانون 0000 Fan failure
فتوکپی کانون The fan is faulty copyir.com فتوکپی کانون Check the fan connector copyir.com فتوکپی کانون Replace the fan copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com
E808فتوکپی کانون 0000 Fixing drive circuit failure
فتوکپی کانون The heater does not turn on copyir.com
فتوکپی کانون A fixing drive motor failure was detected copyir.com فتوکپی کانون Check the connector of the fixing film unit copyir.com فتوکپی کانون Replace the fixing film unit copyir.com فتوکپی کانون Replace the fixing drive motor copyir.com فتوکپی کانون Replace the DC controller PCB copyir.com فتوکپی کانون Replace the power supply PCB copyir.com
اشتراک گذاری در:
در خبرنامه ما عضو شوید
تمامی حقوق این سایت متعلق به کپی ایران بوده و هر گونه بهره‌برداری از آن مستلزم کسب اجازه می‌باشد.