کیو سرا میتا fs1116mfp
2000 Main motor error
The main motor ready input is not given for two seconds during the main motor is driven copyir.com Defective harness between engine/ high voltage PWB and main motor copyir.com Defective main motor copyir.com Defective main motor copyir.com Defective engine/ high voltage PWB copyir.com Defective drive unit copyir.com
4000 Polygon motor (laser scanner unit) error
The polygon motor ready input is not given for eight seconds during the polygon motor is driven copyir.com Defective harness between engine/ high voltage PWB and laser scanner unit copyir.com Defective engine/ high voltage PWB copyir.com Defective polygon motor (laser scanner unit) copyir.com
4200 PD (Pin photo diode) sensor (laser scanner unit) error
The first BD input is not given for 10 seconds after power is turned on and the laser begins emitting copyir.com The first BD input is not given for 7 seconds during printing and after the laser begins emitting copyir.com Defective main PWB copyir.com Defective harness between main PWB and engine/ high voltage PWB copyir.com Defective engine/ high voltage PWB copyir.com
6000 Broken heater lamp error
The temperature won’t rise by 1 degree Celsius during warming up and the heater is turned on for 5 seconds copyir.com The temperature won’t rise by 1 degree Celsius during printing and the heater is turned on for 5 seconds with the duty cycle more than 60% copyir.com Defective fuser thermistor copyir.com Broken thermal cutout or heater lamp copyir.com Defective engine/ high voltage PWB copyir.com
6010 Fuser low temperature
After the fuser heater lamp is turned on, the temperature at the upper fuser roller lower than 100 °C/212 °F continues for 30 s copyir.com Defective the fuser thermistor copyir.com Defective the engine/high voltage PWB copyir.com
6050 Broken fuser thermistor
The thermistor AD value is less than 1 for 600 ms copyir.com Defective the fuser thermistor copyir.com Defective the engine/high voltage PWB copyir.com
6400 Zero cross signal error
While fuser heater ON/OFF control is performed, the zero-cross signal is not input within 3 s copyir.com Defective the power source PWB copyir.com Defective the engine/high voltage PWB copyir.com
7980 Waste toner full (Total page count less than 100,000 pages of printing)
The toner-full sensor has detected that the waste toner is full before the total print page of less than 100,000 pages copyir.com Defective drum unit copyir.com Defective waste toner full sensor copyir.com Defective engine/ high voltage PWB copyir.com
7990 Waste toner full (Total page count more than 100,000 pages of printing)
The toner-full sensor has detected that the waste toner is full before the total print page of more than 100,000 pages copyir.com Defective drum unit copyir.com Defective waste toner full sensor copyir.com Defective engine/ high voltage PWB copyir.com
F040, (E0) Main – Engine communication error
The communication breakdown occurred between the main PWB and the engine/ high voltage PWB during the predetermined period in seconds copyir.com Defective engine/ high voltage PWB copyir.com Defective main PWB copyir.com
F050, (E6) Engine checksum error
Checksum result failed with the CPU and engine/high voltage PWB copyir.com Defective engine/ high voltage PWB copyir.com