کیو سرا میتا fs1200

کیو سرا میتا fs1200

E0    Communication error
Communication between the engine controller and the main controller is failed     copyir     copyir.comcom    • Controller gate array defect • Connector failure between the engine and the main controller • Overrun in the engine system     copyir     copyir.comcom deactivating the progam flash ROM
E1    Main motor error
The main motor is overtorqued     copyir     copyir.comcom    • Overcurrent in the main motor circuitry due to an axcessive torque • Loose connector • Defective gate array on the engine board • No response from the main motor due to the defective motor driver (transistor     copyir     copyir.comcom
E2    Laser scanner motor error
The polygon motor does not deliver a synchronous output (L     copyir     copyir.comcom within the predetermined period of time     copyir     copyir.comcom    • Timeout in the predetermined period of lead time which the scanner motor speed has to be reached at start up (SCRDY*     copyir     copyir.comcom • Connector insertion error • Defective gate array on the engine board • Time out dur to the defective scanner motor driver (transistor     copyir     copyir.comcom
E3    Laser beam detection error
Beam detection is failed     copyir     copyir.comcom The photo detector board does not deliver a synchronous output (L     copyir     copyir.comcom     copyir     copyir.comcom    • No beam hit due to the laser diode defect (PD*     copyir     copyir.comcom • Improper connector insertion • Soiled/defective beam detector (pinphoto diode     copyir     copyir.comcom sensor • Defective safety lock • Unoperative gate array input port
E4    Fuser heater error
The fuser heater is not intact due to disconnection or the circuit failure     copyir     copyir.comcom    • Blown-out thermistor • Improper connector insertion • Blown-out halogen heater • Blown-out thermostat • Comparator defect on the engine board • Defective engine CPU (input port     copyir     copyir.comcom • Defective gate array (input/output port operation     copyir     copyir.comcom
E5    Eraser error
The eraser is blown out or the power supply does not reach to the eraser    • Blown-out LED chip(s     copyir     copyir.comcom • Connector insertion error • Defective gate array (input/output port     copyir     copyir.comcom
E6    Flash ROM error
Checksum is erroneous with the flash ROM     copyir     copyir.comcom    • Data readout error on the flash ROM
E9    Toner motor error
The toner motor is overtorqued    • Overcurrent in the toner motor circuitry due to an axcessive torque • Loose connector • Defective gate array on the engine board • Defective toner motor overcurrent detector
F0    Front control panel error
Communication is failed between the front panel and the main controller     copyir     copyir.comcom    Replace the main controller board     copyir     copyir.comcom
F1    System ROM error
Checksum is failed with FLASH ROM on the main controller board     copyir     copyir.comcom    Replace the main controller board     copyir     copyir.comcom
F2    Main memory error
Checksum is failed with the RAM on the main controller board    Replace the main controller board     copyir     copyir.comcom
F3    General failure
Miscellaneous failure with the main controller     copyir     copyir.comcom other than F0     copyir     copyir.comcom F1     copyir     copyir.comcom and F3     copyir     copyir.comcom above     copyir     copyir.comcom    Turn printer power off     copyir     copyir.comcom then on again     copyir     copyir.comcom If not solved     copyir     copyir.comcom replace the main controller board     copyir     copyir.comcom