-
کیو سرا میتا fs1920
- 0100 Engine board EEPROM (socket mount)
Detecting EEPROM communication error copyir.com Improper installation EEPROM copyir.com Defective engine board (KP-1081) copyir.com
0150 Engine board EEPROM (surface mount) error
Detecting EEPROM communication error copyir.com Defective EEPROM or engine board (KP- 1081) copyir.com
0420 Optional paper feeder PF-60 communication error
Communication error between engine board and optional paper feeder PF-60 copyir.com Improper installation between printer and optional paper feeder copyir.com Defective optional paper feeder PF- 60 copyir.com Defective engine board (KP-1081) copyir.com
0440 Optional sorter SO-60 communication error
Communication error between engine board and optional sorter SO-60 copyir.com Improper installation between printer and optional sorter SO- 60 copyir.com Defective optional sorter SO-60 copyir.com Defective engine board (KP-1081) copyir.com
0460 Optional duplexer DU-61 communication error
Communication error between engine board and optional duplexer DU-61 copyir.com Improper installation between printer and optional duplexer DU-61 copyir.com Defective optional duplexer DU-61 copyir.com Defective engine board (KP-1081) copyir.com
0550 Non-supported duplexer is installed
Non-supported duplexer DU-60 is installede DU-60 is installed copyir.com
0560 Paper feeder PF-60 [top] with wrong firmware version is installed
The code that identifies the firmware version was out of range copyir.com Wrong firmware version is used on the main board in paper feeder PF-60 copyir.com
0570 Paper feeder PF-60 [middle] with wrong firmware version is installed
The code that identifies the firmware version was out of range copyir.com Bulk paper feeder PF-8E with wrong firmware version is installed ·The code that identifies the firmware version was out of range copyir.com Wrong firmware version is used on the main board in paper feeder PF-60 or bulk paper feeder PF-8E copyir.com
0580 Paper feeder PF-60 [bottom] with wrong firmware version is installed
The code that identifies the firmware version was out of range copyir.com Wrong firmware version is used on the main board in paper feeder PF-60 copyir.com
1200 Optional duplexer DU-61 side registration error
Side registration home position error of optional duplexer DU-61 copyir.com Defective gate array U7 on the engine board (KP-1081) copyir.com Improper installation between printer and optional duplexer, or each optional unit copyir.com Defective harness (S03022) between engine board and optional unit interface connector copyir.com Improper connector insertion copyir.com Defective optional duplexer DU-61 copyir.com
2000 Main motor error
The main motor is overloaded Overcurrent in the main motor circuitry due to an excessive torque copyir.com Connector insertion error copyir.com Defective gate array U7 on the engine board (KP- 1081) copyir.com Defective harness between engine board and engine relay board (KP- 1071) copyir.com Defective harness between engine relay board (KP- 1071) and main motor copyir.com
2600 Optional bulk paper feeder PF-8E motor error
Motor error in the optional bulk paper feeder PF-8E copyir.com Defective harness (S03022) between engine board and optional unit interface connector copyir.com Defective optional bulk paper feeder copyir.com
2610 Optional paper feeder PF-60 (Top) paper feed motor error
Paper feed motor error in the top optional paper feederpap Defective gate array U7 on the engine board (KP- 1081) copyir.com Defective harness (S03022) between engine board and optional unit interface connector copyir.com Defective paper feeder PF-60 copyir.com
2620 Optional paper feeder PF-60 (Middle) paper feed motor error
Paper feed motor error in the middle optional paper feeder copyir.comD Defective gate array U7 on the engine board (KP- 1081) copyir.com Defective harness (S03022) between engine board and optional unit interface connector copyir.com Defective optional paper feeder PF- 60 copyir.com
2630 Optional paper feeder PF-60 (bottom) paper feed motor error
Paper feed motor error in the bottom optional paper feeder copyir.comD Defective gate array U7 on the engine board (KP- 1081) copyir.com Defective harness (S03022) between engine board and optional unit interface connector copyir.com Defective paper feeder PF-60 copyir.com
4000 Laser scanner unit (Polygon motor) error
POLRDY* does not go low within 20 seconds after POLON* goes low (When starting) or within 16 seconds after REGPAP signal goes high (during printing) copyir.com Defective gate array U7 on the engine board copyir.com Defective polygon motor copyir.com Improper connector insertion copyir.com Defective harness between laser scanner unit and engine board copyir.com
4200 Laser scanner unit (Pin photo diode sensor) error
Laser beam detection failed copyir.com The pin photo diode sensor [board] (KP-1075) does not deliver a horizontal synchronous signal (PD*) copyir.com No laser beam due to the laser diode defect (PD) copyir.com Soiled or defective pin photo diode sensor copyir.com Defective gate array U7 of engine board copyir.com Improper connector insertion copyir.com Defective harness between engine board and laser scanner unit copyir.com
5300 Eraser lamp error
The ERADEAD* signal (delivered from the eraser lamp blown-out detection circuit on the engine board) goes low continuously more than 1 second, while eraser lamp is on copyir.com Blown-out eraser lamp [board KP- 1067] copyir.com Defective CPU U1 on the engine board copyir.com Improper connector insertion to the eraser lamp [board KP-1067] copyir.com
6000 Fuser unit error
HTEMP remains high for longer than 4 seconds since the heater lamp is on copyir.com The heater lamp continues to be turn on for longer than 60 seconds Blown-out thermistor copyir.com Blown-out heater lamp copyir.com Defective CPU U1 or comparator U9 on the engine board copyir.com Improper connector insertion copyir.com Defective power supply unit copyir.com Defective harness between fuser unit and power supply unit copyir.com
6020 Abnormal high temperature error
HTEMP* remains high for longer than 4 seconds since the heater lamp is on copyir.com The heater lamp continues to be turn on for longer than 60 seconds copyir.com Defective CPU U1 or comparator U9 on the engine board copyir.com Defective engine board (KP-1081) copyir.com Defective thermistor copyir.com Defective photo coupler on the power supply unit for the heater lamp copyir.com
6030 Thermistor error
The thermistor error signal was detected when the heater lamp was turned on copyir.com Defective thermistor copyir.com Defective harness (S02678) copyir.com Defective power supply unit copyir.com Defective engine board (KP-1081) copyir.com Defective fuser board (KP-1069) copyir.com
6400 Zero cross signal error
The ZCROSS signal does not reach the engine board within 3 seconds after power on copyir.com Defective power supply unit copyir.com Defective CPU U1 on the engine board copyir.com
7001 Toner motor error
Toner motor is overloaded copyir.com TNMOC is detected by sampling every other 100 ms in 2 seconds since the main and toner motors are activated following the Replace toner Clean printer message after the “Toner low” is detected copyir.com Overcurrent in the toner motor circuitry due to an excessive torque, caused by hardened toner copyir.com Defective gate array U7 on the engine board copyir.com Improper connector insertion copyir.com Defective harness between developer and high voltage unit copyir.com Defective harness between high voltage unit and engine board copyir.com
7350 Toner refreshing mode error Defective high voltage unit copyir.com Defective toner refreshing copyir.com
7400 The developer unit is not installed or not installed properly
Failed to detect the voltage to identify the developer copyir.com The developer unit is not installed copyir.com The developer connector is not properly inserted in the printer copyir.com Defective developer unit copyir.com Defective engine board (KP-1081) copyir.com
7410 The drum unit is not installed or not installed properly
EEPROM communication error or the drum ID was not identified copyir.com The drum unit is not installed copyir.com The drum unit connector is not properly inserted in the printer copyir.com Defective drum unit copyir.com Defective engine board (KP-1081)
8000 Non-supported device is installed as an optional exit
Serial communication detected that a non-supported bulk paper stacker HS-8E has been installed copyir.com A non-supported bulk paper stacker HS-8E is installed copyir.com
F0 Main board or LCD controller board error
Communication is failed between the LCD controller board (KP-1079) and the main board copyir.comhas Defective system DIMM [board KP- 1059*1/893*2*3] copyir.com Defective main board (KP-1053/ 1033) copyir.com
F010 System DIMM [board] error
Checksum failed with system DIMM [board KP-1059/893] on the main board copyir.com LCD controller board (KP-1079) copyir.com Defective system DIMM [board KP- 1059*1/893*2*3] copyir.com Improper system DIMM [board KP- 1059*1/893*2*3] insertion to system DIMM slot on the main board (KP-1053/ 1033
F020 Main or expanded memory error
Checksum failed with main memory (RAM) on the main board or expanded memory (DIMM) copyir.com Defective system main memory (RAM) on the main board (KP- 1059*1/893*2*3) copyir.com Defective main board (KP-1053/ 1033) copyir.com Defective expanding memory (DIMM) on the main board (KP- 1053/1033)
F040 Communication error
Communication between the engine board and the main board is failed copyir.com Defective gate array (U02) on the main board copyir.com Connector failure between the engine board (KP- 1081) and main board (KP-1053/ 1033) copyir.com
F070 Flash ROM error
CPU U1 of engine board could not write data failed to flash ROM U2 copyir.com Write sequence to flash ROM is not successful copyir.com Verify error copyir.com (Written data does not match the original data copyir.com) Overrun in the engine system, deactivating the program flash ROM (U2) on the engine board (KP- 1081) copyir.com Defective CPU U1 or gate array U7 or flash ROM U2 on the engine board (KP-1081) copyir.com