کیو سرا میتا fs3800n

کیو سرا میتا fs3800n

A0    Zero cross signal error
The ZCROSS signal does not reach the engine board within 3 seconds after power on     copyir.come    • Defective power supply unit     copyir.com • Defective CPU U201 on the engine board     copyir.com
A2    Abnomal high temperature error     copyir.com
CPU U201 detected that the HTEMP* signal (Abnormal temperature of more than approximately 220 °C) is low for more than 3 seconds     copyir.com    • Defective CPU U201 or comparator U205 on the engine board     copyir.com • Defective engine board (KP-864)     copyir.com • Defective thermistor     copyir.com • Defective photo coupler on the power supply unit for the heater lamp     copyir.com
B2    Option paper feeder PF-60 (Top) paper feed motor error
Paper feed motor error in the top option paper feeder     copyir.com    • Defective gate array U204 on the engine board (KP-864)     copyir.com • Defective harness (S02400) between engine board and option unit interface connector     copyir.com • Defective paper feeder PF-60     copyir.com
B3    Option paper feeder PF-60 (Middle) paper feed motor error
Paper feed motor error in the middle option paper feeder     copyir.com    • Defective gate array U204 on the engine board (KP-864)     copyir.com • Defective harness (S02400) between engine board and option unit interface connector     copyir.com • Defective option paper feeder PF-60     copyir.com
B4    Option paper feeder PF-60 (Bottom) paper feed motor error     copyir.com
Paper feed motor error in the bottom option paper feeder     copyir.com    • Defective gate array U204 on the engine board (KP-864)     copyir.com • Defective harness (S02400) between engine board and option unit interface connector     copyir.com • Defective paper feeder PF-60     copyir.com
C0    Option paper feeder PF-60 communication error
Communication error between engine board and option paper feeder PF-60     copyir.com    • Defective gate array U204 on the engine board (KP-864)     copyir.com • Blown-out fuse (F202) on the engine board     copyir.com • Improper installation between printer and option paper feeder     copyir.com • Defective harness (S02400) between engine board and option unit interface connector     copyir.com • Improper connector insertion     copyir.com • Defective option paper feeder PF-60     copyir.com
C1    Option duplexer DU-60 communication error
Communication error between engine board and option duplexer DU-60     copyir.com    • Defective gate array U204 on the engine board (KP-864)     copyir.com • Blown-out fuse (F202) on the engine board     copyir.com • Improper installation between printer and option duplexers     copyir.com • Defective harness (S02400) between engine board and option unit interface connector     copyir.com • Improper connector insertion     copyir.com • Defective option duplexer DU-60     copyir.com PF-60     copyir.com
C2    Option duplexer DU-60 side registration error
Side registration home position error of option duplexer DU-60     copyir.com    • Defective gate array U204 on the engine board (KP-864)     copyir.com • Improper installation between printer and option duplexer, or each option unit     copyir.com • Defective harness (S02400) between engine board and option unit interface connector     copyir.com • Improper connector insertion     copyir.com • Defective option duplexer DU-60     copyir.com
C4    Option sorter SO-60 communication error
Communication error between engine board and option sorter SO-60     copyir.com    • Defective gate array U204 on the engine board (KP-864)     copyir.com • Blown-out fuse (F202) on the engine board     copyir.com • Improper installation between printer and option sorters     copyir.com • Improper connector insertion     copyir.com • Defective main board (KP-777/KP-858)     copyir.com • Defective option sorter SO-60     copyir.com
C7    Option bulk paper stacker HS-8E communication error
Communication error between engine board and option bulk paper stacker HS-8E     copyir.com    • Defective gate array U204 on the engine board (KP-864)     copyir.com • Blown-out fuse (F202) on the engine board     copyir.com • Improper installation between printer and option bulk paper stackers     copyir.com • Defective harness (S02400) between engine board and option unit interface connector     copyir.com • Improper connector insertion     copyir.com • Defective option bulk paper stacker     copyir.com
CE    Option bulk paper feeder PF-8E motor error
Motor error in the option bulk paper feeder PF-8E     copyir.com    • Defective harness (S02400) between engine board and option unit interface connector     copyir.com • Defective option bulk paper feeder     copyir.com
CF    Option bulk paper stacker HS-8E motor error
Motor error in the option bulk paper stacker HS-8E     copyir.com    • Defective harness (S02400) between engine board and option unit interface connector     copyir.com • Defective option bulk paper stacker HS-8E     copyir.com
E0    Communication erroron error
Communication between the engine board and the main board is failed     copyir.com    • Defective gate array (U02) on the main board     copyir.com • Connector failure between the engine board (KP-864) and main board (KP-777/KP- 858)     copyir.com • Overrun in the engine system, deactivating the program flash ROM (U202) on the engine board (KP-864)     copyir.com
E1    Main motor error
The main motor is overloaded     copyir.com    • Overcurrent in the main motor circuitry due to an excessive torque     copyir.com • Connector insertion error     copyir.com • Defective gate array U204 on the engine board (KP-864)     copyir.com • Defective harness between engine board and engine relay board (KP-760)     copyir.com • Defective harness between engine relay board (KP-760) and main motor     copyir.com
E2    Laser scanner unit (Polygon motor) error
POLRDY does not go low within 20 seconds after POLON* goes low (When starting) or within 16 seconds after REGPAP signal goes high (during printing)     copyir.com    • Defective gate array U204 on the engine board     copyir.com • Defective polygon motor     copyir.com • Improper connector insertion     copyir.com • Defective harness between laser scanner unit and engine board     copyir.com
E3    Laser scanner unit (Pin photo diode sensor) error
Laser beam detection failed     copyir.com The pin photo diode sensor [board] (KP-746) does not deliver a horizontal synchronous signal (PD)     copyir.com    • No laser beam due to the laser diode defect (PD)     copyir.com • Soiled or defective pin photo diode sensor     copyir.com • Defective gate array U204 of engine board     copyir.com • Improper connector insertion     copyir.com • Defective harness between engine board and laser scanner unit     copyir.com
E4    Fuser unit error
HTEMP remains high for longer than 4/2 seconds since the heater lamp is on     copyir.com The heater lamp continues to be turn on for longer than 60/30 seconds     copyir.com    • Blown-out thermistor     copyir.com • Blown-out heater lamp     copyir.com • Defective CPU U201 or comparator U205 on the engine board     copyir.com • Improper connector insertion     copyir.com • Defective power supply unit     copyir.com • Defective harness between fuser unit and power supply unit     copyir.com
E5    Eraser lamp error
The ERADEAD signal (delivered from the eraser lamp blownout detection circuit on the engine board) goes low continuously more than 1 second, while eraser lamp is on     copyir.com    • Blown-out eraser lamp [board KP-762]     copyir.com • Defective CPU U201 on the engine board     copyir.com • Improper connector insertion to the eraser lamp [board KP-762]     copyir.com
E9    Toner motor error
Toner motor is overloaded     copyir.com TNMOC is detected by sampling every other 100 ms in 2 seconds since the main and toner motors are activated following the Replace toner Clean printer message after the Toner low TK-60 is detected     copyir.com    • Overcurrent in the toner motor circuitry due to an excessive torque, caused by hardened toner     copyir.com • Defective gate array U204 on the engine board     copyir.com • Improper connector insertion     copyir.com • Defective harness between developer and high voltage unit     copyir.com • Defective harness between high voltage unit and engine board     copyir.com
ED    Flash ROM error
CPU U201 of engine board could not write data failed to flash ROM U202     copyir.com Write sequence to flash ROM is not successful     copyir.com Verify error     copyir.com (Written data does not match the original data     copyir.com)    • Defective CPU U201 or gate array U204 or flash ROM U202 on the engine board (KP- 864)     copyir.com
F0    LCD controller board error
Communication is failed between the LCD controller board (KP-738) and the main board     copyir.com    • Defective system DIMM [board KP-710*1/ KP-689*2]     copyir.com • Defective main board (KP-777/KP-858)     copyir.com • LCD controller board (KP-738)     copyir.com
F1    System DIMM [board] error
Checksum failed with system DIMM [board KP-710/KP-689] on the main board     copyir.com    • Defective system DIMM [board KP-710/ KP-689]     copyir.com • Improper system DIMM [board KP-710/ KP-689] insertion to system DIMM slot on the main board (KP-777/KP-858)     copyir.com
F2    Main or expanded memory error
Checksum failed with main memory (RAM) on the main board or expanded memory (DIMM)     copyir.com    • Defective system main memory (RAM) on the main board (KP-777/KP-858)     copyir.com • Defective main board (KP-777/KP-858)     copyir.com • Defective expanding memory (DIMM) on the main board (KP-777/KP-858)     copyir.com
F3    General failure
Miscellaneous failure with the main board, other than F0, F1 and F2, above     copyir.com    • Defective main board (KP-777/KP-858)     copyir.com