کیو سرا میتا fs5900c

کیو سرا میتا fs5900c

A2    Fuser temperature is over 210 °C     copyir.com
Fuser temperature does not reach 100 °C within 200sec,160 °C within 500sec during warming up, or it is less than 120 °C during standby, and it does not return to set temperature within 100sec after a low temperature error occurred during printing     copyir.com    High temperature error Temperature rising error error
A5    1     copyir.com Main charger Arc discharge of contact has occurred     copyir.com 2     copyir.com DEV,FTR,STR bias Short circuit of contact voltage has occurred     copyir.com    Charger error
A6    Fuser/Toner Cartridge fan is not rotating at normal speed     copyir.com    Fuser/Toner Cartridge fan error
A7    Power supply fan is not rotating at normal speed     copyir.com    Power supply fan error
A8    Ozone fan is not rotating at normal speed     copyir.com    Ozone fan error
A9    Multi-Purpose Pickup Roller movement error occurred    Multi-Purpose Pickup Roller movement error
AA    Toner Cartridge Drive motor (sleeve motor) is not phase-locked and is not rotating at normal speed     copyir.com    Toner Cartridge Drive motor (sleeve motor) unlocked
AB    Paper feed motor is not phase-locked and is not rotating at normal speed     copyir.com    Paper feed motor unlocked error
AC    OPC home and IT home are not synchronous     copyir.com    OPC asynchronous with intermediate transfer unit
AD    OPC home is not detected within 4     copyir.com5 sec     copyir.com during rotation of main motor     copyir.com    Position error of the OPC unit
AE    IT home is not detected within 0     copyir.com7 sec     copyir.com during rotation of main motor     copyir.com    Position error of the intermediate transfer unit
AF    The cleaning blade did not reached to non-cleaning position or cleaning position within 0     copyir.com7 sec     copyir.com    Cleaning blade movement erroror
B7    The media transfer roller did not reach to transfer position or home position within 0     copyir.com9 sec     copyir.com    Media transfer roller movement error
B8    The dev     copyir.com unit did not reach contact position or home position within 1 sec     copyir.com    Cyan developing unit movement error
B9    The dev     copyir.com unit did not reach contact position or home position within 1 sec     copyir.com    Magenta developing unit movement error
BA    The dev     copyir.com unit did not reach contact position or home position within 1 sec     copyir.com    Yellow developing unit movement error
BB    The dev     copyir.com unit did not reach contact position or home position within 1 sec     copyir.com    Black developing unit movement error
BC    Engine SRAM check error erroror    Engine SRAM check error erroror
BD    Engine EEPROM check error     copyir.com Printing is continued     copyir.com    Engine EEPROM check error
BE    EEPROM (Imaging unit) check error    EEPROM (Imaging unit) Errororor
BF    EEPROM (Fuser unit) check error    EEPROM (Fuser unit) Error error
DE    Imaging Unit type mismatch    Imaging Unit being used is not intended for use with the printer     copyir.com
DF    Fuser Unit type mismatchr error    Fuser Unit being used is not intended for use with the printer     copyir.com
E0    Parity error occurs or no response comes back from engine     copyir.com    Engine communication Error
E1    Main motor is not phase-locked and is not rotating at normal speed     copyir.com    Main motor unlockedmatchr error
E2, E3    Laser Scanner motor is not phase-locked and is not rotating at normal speed L-Sync signal is not detected after APC (Auto Power Control)     copyir.com Irregular L-Sync signal is detected     copyir.com    Laser scanner motor unlocked L-Sync over L-Sync short
E4    Fuser thermistor is disconnected     copyir.com    Thermistor open error
E6    Engine Program ROM checksum error    Engine Program ROM checksum error
F0    Controller Board system Lock error    System does not lock because of failure on communication with the printer panel     copyir.com
F1    Controller checksum Error    Checksum failed on Controller ROM     copyir.com
F2    RAM Read/Write Error    Checksum has failed on Controller RAM     copyir.com
F3    System Error    General controller failure     copyir.com
F7    Option Font ROM checksum error    Checksum has failed on option font ROM     copyir.com