کیو سرا میتا fs6700

کیو سرا میتا fs6700

E0    Communication error
Communication between the engine controller and the main controller is failed     copyir.com         copyir.com Controller gate array defect      copyir.com Connector failure between the engine and the main controller      copyir.com Overrun in the engine system, deactivating the progam flash ROM
E1    Main motor error
The main motor is overtorqued     copyir.com         copyir.com Overcurrent in the main motor circuitry due to an axcessive torque      copyir.com Loose connector to motor      copyir.com Defective gate array on the engine board      copyir.com No response from the main motor due to the defective motor driver (transistor)      copyir.com Defective overcurrent detector (transistor)
E2    Laser scanner motor error
The polygon motor does not deliver a synchronous output (L) within the predetermined period of time     copyir.com         copyir.com Timeout in the predetermined period of lead time which the scanner motor speed has to be reached at start up (SCRDY*)      copyir.com Connector insertion error      copyir.com Defective gate array on the engine board      copyir.com Time out dur to the defective scanner motor driver (transistor)
E3    Laser beam detection error
Beam detection is failed     copyir.com The photo detector board does not deliver a synchronous output (L)     copyir.com         copyir.com No beam hit due to the laser diode defect (PD*)      copyir.com Improper connector insertion      copyir.com Soiled/defective beam detector (pin-photo diode) sensor      copyir.com Defective safety lock      copyir.com Unoperative gate array input portf
E4    Fuser heater error
The fuser heater is not intact due to disconnection or the circuit failure     copyir.com         copyir.com Blown-out thermistor      copyir.com Improper connector insertion      copyir.com Blown-out halogen heater      copyir.com Blown-out thermostat      copyir.com Comparator defect on the engine board      copyir.com Defective engine CPU (input port)      copyir.com Defective gate array (input/output port operation)
E5    Eraser error
The eraser is blown out or the power supply does not reach to the eraser     copyir.com         copyir.com Blown-out LED chip(s)      copyir.com Connector insertion error      copyir.com Defective gate array (input/output port)
E9    Toner motor error
The toner motor is overtorqued     copyir.comash ROM         copyir.com Overcurrent in the toner motor circuitry due to an axcessive torque      copyir.com Loose connector      copyir.com Defective gate array on the engine board      copyir.com Defective toner motor overcurrent detector
ED    Flash ROM error
Checksum is erroneous with the flash ROM     copyir.com         copyir.com Data readout error on the flash ROM
F0    Front control panel error
Communication is failed between the front panel and the main controller     copyir.com
F1    System ROM error
Checksum is failed with EPROMs on the main controller board     copyir.com
F2    Main memory error
Checksum is failed with the RAM on the main controller board     copyir.com
F3    General failure
Miscellaneous failure with the main controller, other than F0, F1, and F3, above     copyir.com
E0    Communication error
Communication between the engine controller and the main controller is failed     copyir.com         copyir.com Controller gate array defect      copyir.com Connector failure between the engine and the main controller      copyir.com Overrun in the engine system, deactivating the progam flash ROM
E1    Main motor error
The main motor is overtorqued     copyir.com         copyir.com Overcurrent in the main motor circuitry due to an axcessive torque      copyir.com Loose connector to motor      copyir.com Defective gate array on the engine board      copyir.com No response from the main motor due to the defective motor driver (transistor)      copyir.com Defective overcurrent detector (transistor)
E2    Laser scanner motor error
The polygon motor does not deliver a synchronous output (L) within the predetermined period of time     copyir.com         copyir.com Timeout in the predetermined period of lead time which the scanner motor speed has to be reached at start up (SCRDY*)      copyir.com Connector insertion error      copyir.com Defective gate array on the engine board      copyir.com Time out dur to the defective scanner motor driver (transistor)
E3    Laser beam detection error
Beam detection is failed     copyir.com The photo detector board does not deliver a synchronous output (L)     copyir.com         copyir.com No beam hit due to the laser diode defect (PD*)      copyir.com Improper connector insertion      copyir.com Soiled/defective beam detector (pin-photo diode) sensor      copyir.com Defective safety lock      copyir.com Unoperative gate array input portf
E4    Fuser heater error
The fuser heater is not intact due to disconnection or the circuit failure     copyir.com         copyir.com Blown-out thermistor      copyir.com Improper connector insertion      copyir.com Blown-out halogen heater      copyir.com Blown-out thermostat      copyir.com Comparator defect on the engine board      copyir.com Defective engine CPU (input port)      copyir.com Defective gate array (input/output port operation)
E5    Eraser error
The eraser is blown out or the power supply does not reach to the eraser     copyir.com         copyir.com Blown-out LED chip(s)      copyir.com Connector insertion error      copyir.com Defective gate array (input/output port)
E9    Toner motor error
The toner motor is overtorqued     copyir.comash ROM         copyir.com Overcurrent in the toner motor circuitry due to an axcessive torque      copyir.com Loose connector      copyir.com Defective gate array on the engine board      copyir.com Defective toner motor overcurrent detector
ED    Flash ROM error
Checksum is erroneous with the flash ROM     copyir.com         copyir.com Data readout error on the flash ROM
F0    Front control panel error
Communication is failed between the front panel and the main controller     copyir.com
F1    System ROM error
Checksum is failed with EPROMs on the main controller board     copyir.com
F2    Main memory error
Checksum is failed with the RAM on the main controller board     copyir.com
F3    General failure
Miscellaneous failure with the main controller, other than F0, F1, and F3, above     copyir.com