کیو سرا میتا fs8000c

کیو سرا میتا fs8000c

0121    EEPROM read error
• The ASIC (U7) of engine controller PWB (KP-801) does not access to the EEPROM (U621) of drum PWB (KP-813) normally      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective drum PWB (KP-813)      copyir.com Defective harness (S02575) between engine controller PWB (KP-801) and drum unit, or poor contact of the connector terminals      copyir.comv
0440    Communication error between printer and document finisher/ mailbox sorter
• The CPU (U2) of engine controller PWB (KP-801) does not communicate with the document finisher DF-31/mailbox sorter SO-30 normally      copyir.com • The microcomputer (U26) of engine controller PWB (KP-801) does not communicate to the document finisher DF-31/mailbox sorter SO-30 normally      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective main PWB of document finisher DF-31/ mailbox sorter SO-30      copyir.com Defective paper feeder/options relay PWB (KP- 830)      copyir.com Defective signal cable between printer and document finisher DF-31/mailbox sorter SO-30      copyir.com Defective harness (S02591) between engine controller PWB (KP-801) and paper feeder/ options relay PWB (KP-830), or poor contact of the connector terminals      copyir.com
0450    Communication error between printer and bulk stacker
• The CPU (U2) of engine controller PWB (KP-801) does not communicate with the bulk stacker ST-31 normally      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective main board of bulk stacker ST-31      copyir.com Defective paper feeder/options relay PWB (KP- 830)      copyir.com Defective signal cable between bulk stacker ST- 31      copyir.com Defective harness (S02591) between engine controller PWB (KP-801) and paper feeder/ options relay PWB (KP-830), or poor contact of the connector terminals      copyir.com
0460    Communication error between printer and duplex unit
• The CPU (U2) of engine controller PWB (KP-801) does not communicate with the duplex unit PD- 30 normally      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective main board of duplex unit PD-30      copyir.com Defective paper feeder/options relay PWB (KP- 830)      copyir.com Defective connection printer and duplex unit PD-30      copyir.com Defective harness (S02591) between engine controller PWB (KP-801) and paper feeder/ options relay PWB (KP-830), or poor contact of the connector terminals      copyir.com
1010    Overcurrent detection of upper cassette base motor (The first paper feeder)
• Excessive current has flowed through the upper cassette base motor which elevates the bottom plate in the cassette when the upper cassette is installed in the top paper feeder PF- 30A or power is turned on      copyir.com    Defective upper cassette base motor      copyir.com Defective bottom plate elevation mechanism of upper cassette      copyir.com Defective main board of paper feeder PF-30A      copyir.com Defective engine controller PWB (KP-801)      copyir.com
1020    Overcurrent detection of lower cassette base motor (The first paper feeder)
• Excessive current has flowed through the lower cassette base motor which elevates the bottom plate in the cassette when the lower cassette is installed in the first paper feeder PF- 30A or power is turned on      copyir.com Overcurrent detection of cassette base motor (Duplex unit) • Excessive current has flowed through the cassette base motor which elevates the bottom plate in the cassette when the lower cassette is installed in the duplex unit PD-30      copyir.com    Defective lower cassette base motor      copyir.com Defective bottom plate elevation mechanism of lower cassette      copyir.com Defective main board of paper feeder PF-30A      copyir.com Defective engine controller PWB (KP-801)      copyir.com Defective lower cassette base motor      copyir.com Defective bottom plate elevation mechanism of lower cassette      copyir.com Defective main board of the duplex unit PD- 30      copyir.com Defective engine controller PWB (KP-801)      copyir.com
1030    Overcurrent detection of upper cassette base motor (The second paper feeder)
• Excessive current has flowed through the upper cassette base motor which elevates the bottom plate in the cassette when the upper cassette is installed in the second paper feeder PF-30A or power is turned on      copyir.com    Defective upper cassette base motor      copyir.com Defective bottom plate elevation mechanism of upper cassette      copyir.com Defective main board of paper feeder PF-30A      copyir.com Defective engine controller PWB (KP-801)      copyir.com
1040    Overcurrent detection of lower cassette base motor (The second paper feeder)
• Excessive current has flowed through the lower cassette base motor which elevates the bottom plate in the cassette when the lower cassette is installed in the second paper feeder PF-30A or power is turned on      copyir.com    Defective lower cassette base motor      copyir.com Defective bottom plate elevation mechanism of lower cassette      copyir.com Defective main board of paper feeder PF-30A      copyir.com Defective engine controller PWB (KP-801)      copyir.com
1050    Overcurrent detection of upper cassette base motor (The third paper feeder)
• Excessive current has flowed through the upper cassette base motor which elevates the bottom plate in the cassette when the upper cassette is installed in the third paper feeder PF- 30A or power is turned on      copyir.com    Defective upper cassette base motor      copyir.com Defective bottom plate elevation mechanism of upper cassette      copyir.com Defective main board of paper feeder PF-30A      copyir.com Defective engine controller PWB (KP-801)      copyir.com
1060    Overcurrent detection of lower cassette base motor (The third paper feeder)
• Excessive current has flowed through the lower cassette base motor which elevates the bottom plate in the cassette when the lower cassette is installed in the third paper feeder PF- 30A or power is turned on      copyir.com    Defective lower cassette base motor      copyir.com Defective bottom plate elevation mechanism of lower cassette      copyir.com Defective main board of paper feeder PF-30A      copyir.com Defective engine controller PWB (KP-801)      copyir.com
1210    Side registration home position sensor detection error (Duplex unit)
• The side registration home position sensor of duplex unit PD-30 does not detect home position of side registration guides      copyir.com    Defective side registration home position sensor      copyir.com Defective side registration motor      copyir.com Defective engine controller PWB (KP-801)      copyir.com
2000    Main drive motor lock
• The frequency generation pulse which the main drive motor generates to CPU (U2) on the engine controller PWB (KP-801) in normal operation (after self-diagnostics codes 2010 and 2020 are cleared) is not at the correct frequency      copyir.com8    Defective main drive motor      copyir.com Excessive torque for driving drum unit or primary transfer unit      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02571) between engine controller PWB (KP-801) and main drive motor, or poor contact of the connector terminals      copyir.com Defective engine controller PWB (KP-801)      copyir.com
2010    Main drive motor starting error
• No FG (Frequency generation) pulse is entered within the predetermined period since ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the main drive motor      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective main drive motor      copyir.com Excessive torque for driving drum unit or primary transfer unit      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02571) between engine controller PWB (KP-801) and main drive motor, or poor contact of the connector terminals      copyir.com Defective engine controller PWB (KP-801)      copyir.com
2020    Main drive motor starting time-out
• The FG (Frequency generation) pulse does not reach the correct frequency since ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the main drive motor      copyir.comr    Defective main drive motor      copyir.com Excessive torque for driving drum unit or primary transfer unit      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02571) between engine controller PWB (KP-801) and main drive motor, or poor contact of the connector terminals      copyir.com
2101    Black developer drive motor lock
• The FG (Frequency generation) pulse which the black developer drive motor generates is not entered at the correct frequency in CPU (U2) on the engine controller PWB (KP-801) during normal operation (after selfdiagnostics codes 2111 and 2121 are cleared)      copyir.com
2102    Color developers drive motor lock
• The FG (Frequency generation) pulse which the color developers drive motor generates is not entered at the correct frequency in ASIC (U8) on the engine controller PWB (KP-801) during normal operation (after selfdiagnostics codes 2112 and 2122 are cleared)      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective color developers drive motor      copyir.com Excessive torque for driving color developers      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02609) between engine controller PWB (KP-801) and color developers drive motor, or poor contact of the connector terminals      copyir.com
2111    Black developer drive motor starting error
• No FG (Frequency generation) pulse is entered when ASIC (U7) on the engine controller PWB (KP-801) has issued a motor activation signal to the black developer drive motor      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective black developer drive motor      copyir.com Excessive torque for driving black developer      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02570) between engine controller PWB (KP-801) and main drive motor, or poor contact of the connector terminals      copyir.com
2112    Color developers drive motor starting error
• No FG (Frequency generation) pulse is entered when ASIC (U7) on the engine controller PWB (KP-801) has issued a motor activation signal to the drive motor for the color developers      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective color developers drive motor      copyir.com Excessive torque for driving color developers      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02609) between engine controller PWB (KP-801) and color developers drive motor, or poor contact of the connector terminals      copyir.com
2121    Black developer drive motor starting time-out
• The FG (Frequency generation) pulse does not reach the correct frequency when ASIC (U7) on the engine controller PWB (KP-801) has issued a motor activation signal to the black developer drive motor      copyir.comdev    Defective engine controller PWB (KP-801)      copyir.com Defective black developer drive motor      copyir.com Excessive torque for driving black developer      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02570) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals      copyir.com
2122    Color developers drive motor starting time-out
• The FG (Frequency generation) pulse does not reach the correct frequency when ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the drive motor that drives the color developers      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective color developers drive motor      copyir.com Excessive torque for driving color developers      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02609) between engine controller PWB (KP-801) and color developers, or poor contact of the connector terminals      copyir.com
2320    Fuser drive motor error
• The fuser control system does not operate normally      copyir.com    Defective engine controller PWB (KP-801)      copyir.com
2340    Fuser drive motor driving clock table error
• An error has occurred in the driving clock table on the engine controller PWB (KP-801) that controls the fuser drive motor (a stepping motor)      copyir.com    Defective engine controller PWB (KP-801)      copyir.com
2500    Paper feed motor lock
• The FG (Frequency generation) pulse which the paper feed motor generates is not entered at the correct frequency in ASIC (U8) on the engine controller PWB (KP-801) during normal operation      copyir.comn    Defective engine controller PWB (KP-801)      copyir.com Defective paper feed motor      copyir.com Excessive torque for driving paper feed unit      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02564) between engine controller PWB (KP-801) and paper feed motor, or poor contact of the connector terminals      copyir.com
2510    Paper feed motor starting error
• No FG (Frequency generation) pulse is entered within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the paper feed motor      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective paper feed motor      copyir.com Excessive torque for driving paper feed unit      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02564) between engine controller PWB (KP-801) and paper feed motor, or poor contact of the connector terminals      copyir.com
2520    Paper feed motor starting time-out
• The FG (Frequency generation) pulse does not reach the correct frequency within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) has issued a motor activation signal to the paper feed motor      copyir.comt    Defective engine controller PWB (KP-801)      copyir.com Defective paper feed motor      copyir.com Excessive torque for driving paper feed unit      copyir.com (Overloaded by a damaged gear      copyir.com) Defective harness (S02564) between engine controller PWB (KP-801) and main paper feed, or poor contact of the connector terminals      copyir.com
4000    Polygon motor error
• The READY signal is not entered within the predetermined period when CPU (U2) on the engine controller PWB (KP-801) has issued a motor activation signal to the laser scanner unit      copyir.como    Defective engine controller PWB (KP-801)      copyir.com Defective laser scanner unit (PD PWB [KP-838])      copyir.com Defective harness (S02542) between engine controller PWB (KP-801) and laser scanner unit, or poor contact of the connector terminals      copyir.com
4200    Horizontal synchronized signal (PD) detection error
• The horizontal synchronization signal (PD) is not entered by the laser scanner unit when ASIC (U7) on the engine controller PWB (KP-801) has issued a laser activation signal      copyir.comls      copyir.com#0    Defective engine controller PWB (KP-801)      copyir.com Defective laser scanner unit (PD PWB [KP-838])      copyir.com Defective harness (S02542) between engine controller PWB (KP-801) and laser scanner unit, or poor contact of the connector terminals      copyir.com
5120    Abnormal separation charger high voltage leak current
• ASIC (U8) on the engine controller PWB (KP-801) has detected a excessive leakage current in the separation charger high voltage supply      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective separation charger high voltage unit      copyir.com Defective harness (S02616) between engine controller PWB (KP-801) and separation charger high voltage unit, or poor contact of the connector terminals      copyir.com
5300    Eraser lamp broken detection
• The current at the correct level is not detected when ASIC (U8) on the engine controller PWB (KP-801) generates the signal to activate the eraser lamp      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective drum unit (eraser lamp or drum PWB [KP- 813])      copyir.com Defective harness (S02575) between engine controller PWB (KP-801) and drum unit, or poor contact of the connector terminals      copyir.com
6000    Heat roller heating time-out 1
• The temperature on the heat roller does not rise within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) has turned on the upper heater lamp      copyir.com This is detected when the upper heater lamp is turned on      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective upper heater lamp      copyir.com Defective upper thermostat      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective upper fuser thermistor, or fitting is not proper      copyir.com Defective power supply unit      copyir.com Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals      copyir.com
v
6010    Heat roller heating time-out 2
• The temperature on the heat toller does not reach the correct temperature within the predetermined period after self-diagnostic code 6000 is cleared      copyir.com The period for detection is longer than the condition for selfdiagnostics code 6000      copyir.comne con    Defective engine controller PWB (KP-801)      copyir.com Defective upper heater lamp      copyir.com Defective upper thermostat      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective upper fuser thermistor, or fitting is not proper      copyir.com Defective AC power source (Abnormal low voltage)      copyir.com Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals      copyir.com
6020    Heat roller abnormal high temperature
• The temperature on the heat roller has risen up to the abnormal temperature      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective upper heater lamp      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective upper fuser thermistor      copyir.com Defective power supply unit      copyir.com Defective AC power source      copyir.com (Abnormal high voltage) Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals      copyir.com
6030    Upper fuser thermistor broken detection
• No temperature detection output is obtained from the upper fuser thermistor      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective upper fuser thermistor, or improper fitting      copyir.com      copyir.com Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit (upper fuser thermistor), or poor contact of the connector terminals      copyir.com
6040    Upper fuser thermistor abnormal temperature detection
• The temperature detection output from the upper fuser thermistor is abnormal change      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective upper fuser thermistor, or fitting is not proper      copyir.com Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit (upper fuser thermistor), or poor contact of the connector terminals      copyir.com
6100    Press/heat roller heating time-out 1
• The temperature on the press/heat roller does not rise within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) has turned on the lower heater lamp      copyir.com This is detected when the lower heater lamp is turned on      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective lower heater lamp      copyir.com Defective lower thermostat      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective lower fuser thermistor, or fitting is not proper      copyir.com Defective power supply unit      copyir.com Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals      copyir.com
6110    Press/heat roller heating time-out 2 • The temperature on the press/heat toller does not reach the correct temperature within the predetermined period after self-diagnostic code 6100 is cleared      copyir.com The period for detection is longer than the condition for selfdiagnostics code 6100      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective lower heater lamp      copyir.com Defective lower thermostat      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective lower fuser thermistor, or fitting is not proper      copyir.com Defective AC power source (Abnormal low voltage)      copyir.com Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals      copyir.com
6120    Press/heat roller abnormal high temperature
• The temperature on the press/heat roller has risen up to the predetermined abnormal temperature      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective lower heater lamp      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective lower fuser thermistor      copyir.com Defective power supply unit      copyir.com Defective AC power source (Abnormal high voltage)      copyir.com Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit, or poor contact of the connector terminals      copyir.com
6130    Lower fuser thermistor broken detection
• The temperature detection is not obtained from the lower fuser thermistor      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective lower fuser thermistor, or improper fitting      copyir.com Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit (lower fuser thermistor), or poor contact of the connector terminals      copyir.com
6140    Lower fuser thermistor abnormal temperature detection
• The temperature detection output from the lower fuser thermistor is out of the normal range      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective fuser PWB (KP-811)      copyir.com Defective lower fuser thermistor, or fitting is not proper      copyir.com Defective harness (S02572) between engine controller PWB (KP-801) and fuser unit (lower fuser thermistor), or poor contact of the connector terminals      copyir.com
6430    Oil roller unit fuse break error
• The engine controller PWB (KP-801) is not able to cut the fuse on the oil roller unit      copyir.com    Defective oil roller unit fuse      copyir.com Defective harness (S02619) between engine controller PWB (KP-801) and oil roller unit detection sensor, or poor contact of the connector terminals      copyir.com
7001    Black toner feed motor lock
• The revolution of the black toner feed motor does not reach the predetermined revolution within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) activates the black toner feed motor      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective black developer (Black developer PWB [KP-817])      copyir.com Defective harness (S02547) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals      copyir.com
7002    Cyan toner feed motor lock
• The revolution of the cyan toner feed motor does not reach the predetermined revolution within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) activates the cyan toner feed motor      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective cyan developer (Cyan developer PWB [KP-815])      copyir.com Defective harness (S02547) between engine controller PWB (KP-801) and cyan developer, or poor contact of the connector terminals      copyir.com
7003    Magenta toner feed motor lock
• The revolution of the magenta toner feed motor does not reach the predetermined revolution within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) activates the magenta toner feed motor      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective magenta developer (Magenta developer PWB [KP-815])      copyir.com Defective harness (S02546) between engine controller PWB (KP-801) and magenta developer, or poor contact of the connector terminals      copyir.com
7004    Yellow toner feed motor lock
• The revolution of the yellow toner feed motor does not reach the predetermined revolution within the predetermined period when ASIC (U8) on the engine controller PWB (KP-801) activates the yellow toner feed motor      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective yellow developer (Yellow developer PWB [KP-847])      copyir.com Defective harness (S02546) between engine controller PWB (KP-801) and yellow developer, or poor contact of the connector terminals      copyir.com
7101    Black T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801)      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective black developer (black developer PWB [KP-817] or black T/C sensor)      copyir.com Defective black developer      copyir.com (black toner feed motor does not rotate in the correct revolution      copyir.com) Defective harness (S02547) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals      copyir.com
7102    Cyan T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801)      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective cyan developer (cyan developer PWB [KP-815] or cyan T/C sensor)      copyir.com Defective cyan developer      copyir.com (cyan toner feed motor does not rotate in the correct revolution      copyir.com) Defective harness (S02547) between engine controller PWB (KP-801) and cyan developer, or poor contact of the connector terminals      copyir.com
7103    Magenta T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801)      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective magenta developer (magenta developer PWB [KP-815] or magenta T/C sensor)      copyir.com Defective magenta developer      copyir.com (magenta toner feed motor does not rotate in the correct revolution      copyir.com) Defective harness (S02546) between engine controller PWB (KP-801) and magenta developer, or poor contact of the connector terminals      copyir.com
7104    Yellow T/C sensor toner density detection error
• A normal toner density signal is not entered in the A/D port of CPU (U2) on the engine controller PWB (KP- 801)      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective yellow developer (yellow developer PWB [KP-815] or yellow T/C sensor)      copyir.com Defective yellow developer      copyir.com (yellow toner feed motor does not rotate in the correct revolution      copyir.com) Defective harness (S02546) between engine controller PWB (KP-801) and yellow developer, or poor contact of the connector terminals      copyir.com
7301    Intermediate toner hopper toner feed error
• Black toner is not fed in the intermediate toner hopper in the black toner developer from the black toner container within the predetermined period      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective black toner empty sensor PWB (KP- 895, KP-896)      copyir.com Defective black toner feed clutch      copyir.com Poor contact of the black toner feed clutch      copyir.com Defective feed drive PWB (KP- 822)      copyir.com Defective harness (S02547) between engine controller PWB (KP-801) and black developer, or poor contact of the connector terminals      copyir.com Defective harness (S02563) between engine controller PWB (KP-801) and feed drive PWB (KP-822), or poor contact of the connector terminals      copyir.com
7700    Offset drum sensor detection error
• A pulse signal is not entered to ASIC (U7) on the engine controller PWB from the offset drum sensor      copyir.com    Defective drum PWB (KP-813)      copyir.com Defective engine controller PWB (KP-801)      copyir.com Defective harness (S02575) between engine controller PWB (KP-801) and drum unit, or poor contact of the connector terminals      copyir.com
7710    Offset drum sensor detection error
• A pulse signal is not entered to ASIC (U7) on the engine controller PWB from the offset drum sensor      copyir.com    Defective drum PWB (KP-813)      copyir.com Defective engine controller PWB (KP-801)      copyir.com Defective harness (S02575) between engine controller PWB (KP-801) and drum unit, or poor contact of the connector terminals      copyir.com
8010    Feeder motor error (Document finisher)
• Feeder motor of the document finisher DF-31 does not operate normally      copyir.comm the    Defective feeder motor of the document finisher DF-31      copyir.com Defective engine controller PWB (KP-801)      copyir.com
8020    Paper ejection motor error (Document finisher)
• Paper ejection motor of the document finisher DF-31 does not operate normally      copyir.com PWB    Defective paper ejection motor of the document finisher DF-31      copyir.com Defective engine controller PWB (KP-801)      copyir.com
8140    Tray elevation motor error (Document finisher)
• Tray elevation motor of the document finisher DF-31 does not operate normally      copyir.com    Defective tray elevation motor of the document finisher DF-31      copyir.com Defective engine controller PWB (KP-801)      copyir.com
8170    Matching board movement motor error (Document finisher)
• Matching board movement motor of the document finisher DF-31 does not operate normally      copyir.com    Defective matching board movement motor of the document finisher DF-31      copyir.com Defective engine controller PWB (KP-801)      copyir.com
8210    Staple movement motor error (Document finisher)
• Staple movement motor of the document finisher DF-31 does not operate normally      copyir.com    Defective staple movement motor of the document finisher DF-31      copyir.com Defective engine controller PWB (KP-801)      copyir.com
8230    Staple motor error (Document finisher)
• Staple motor of the document finisher DF-31 does not operate normally      copyir.com-801)      copyir.com    Defective staple motor of the document finisher DF-31      copyir.com Defective engine controller PWB (KP-801)      copyir.com
8290    Sorter compatibility error
• The engine controller PWB (KP-801) does not recognize compatibility of the mailbox sorter SO-30 for this printer      copyir.com    The ROM version of mailbox sorter S0-30 main board is not compatible for this printer      copyir.com Defective mailbox sorter S0-30 main board      copyir.com Defective engine controller PWB (KP-801)      copyir.com
8510    Bulk stacker compatibility error
• The engine controller PWB (KP-801) does not recognize compatibility of the bulk stacker ST-30 for installed printer      copyir.com    The ROM version of bulk stacker ST-30 main board is not compatible for this printer      copyir.com Defective bulk stacker ST-30 board      copyir.com Defective engine controller PWB (KP-801)      copyir.com
F000    Main controller PWB error
• The operation breakdown occurs between main controller PWB (KP- 800) and operation panel PWB (KP- 805) during 30 seconds      copyir.comr      copyir.com con    Defective main controller PWB (KP-800)      copyir.com Defective operator panel PWB (KP- 805)      copyir.com Defective mainengine controllers relay PWB (KP- 802)      copyir.com Defective engine controller PWB (KP-801)      copyir.com Defective harness (S02540) between engine controller PWB (KP-801) and operator panel PWB (KP- 805), or poor contact of the connector terminals      copyir.comf t
F010    System DIMM checksum error
• Checksum for the system DIMM PWB (KP-689) that holds the system program is wrong      copyir.com ST-30    Defective system DIMM PWB (KP- 689)      copyir.com Defective main controller PWB (KP-800)      copyir.com
F020    Memory check error
• Access to the expanding memory (DIMM) or RAM on the main controller PWB (KP-800) is unobtainable      copyir.como    Defective main controller PWB (KP-800)      copyir.com Defective expansion memory (DIMM)      copyir.com
F030    Main controller PWB system error
• The error concerned with the system occurred except self diagnostic codes F0 (F010) conditions      copyir.com    Defective main controller PWB (KP-800)      copyir.com
F040    Main – Engine controller PWBs communication error
• The communication breakdown occurred between main controller PWB (KP-800) and engine controller PWB (KP-801) during 30 seconds      copyir.com    Defective engine controller PWB (KP-801)      copyir.com Defective main controller PWB (KP-800)      copyir.com
F070    Flash ROM checksum error
• Check result is not correct about flash ROM (U10) checksum of engine controller PWB (KP-801)      copyir.com    Defective engine controller PWB (KP-801)      copyir.com