کیو سرا میتا fs9530dn

کیو سرا میتا fs9530dn

0150    Backup memory device problem (Engine PWB)
Reading from or writing to EEPROM cannot be performed      copyir.com    Defective engine PWB      copyir.com Device damage of EEPROM      copyir.com
0160    Backup memory data problem (Engine PWB)
Reading data from EEPROM is abnormal      copyir.com Read and write data does not match five times continuously      copyir.com    Defective engine PWB      copyir.com Device damage of EEPROM      copyir.com
1010    Upper lift motor error When cassette 1 is inserted, upper lift limit switch does not turn on within 12 s of upper lift motor turning on      copyir.com    Poor contact in the connector terminals      copyir.com Broken gears or couplings of upper lift motor      copyir.com Defective upper lift motor      copyir.com Defective upper lift limit switch      copyir.com Poor contact in the connector terminals      copyir.com Defective engine PWB      copyir.com
1020    Lower lift motor error
When cassette 2 is inserted, lower lift limit switch does not turn on within 12 s of lower lift motor turning on      copyir.com    Poor contact in the connector terminals      copyir.com Broken gears or couplings of lower lift motor      copyir.com Defective lower lift motor      copyir.com Defective lower lift limit switch      copyir.com Poor contact in the connector terminals      copyir.com Defective engine PWB      copyir.com
1030    Paper feeder lift motor 1 error (optional paper feeder)
When optional cassette 3 is inserted, paper feeder lift switch 1 does not turn on within 12 s of paper feeder lift motor 1 turning on      copyir.com    Poor contact in the connector terminals      copyir.com Broken gears or couplings of paper feeder lift motor 1      copyir.com Defective paper feeder lift motor 1      copyir.com Defective paper feeder lift switch 1      copyir.com
1040    Paper feeder lift motor 2 error (optional paper feeder)
When optional cassette 4 is inserted, paper feeder lift switch 2 does not turn on within 12 s of paper feeder lift motor 2 turning on      copyir.com    Poor contact in the connector terminals      copyir.com Broken gears or couplings of paper feeder lift motor 2      copyir.com Defective paper feeder lift motor 2      copyir.com Defective paper feeder lift switch 2      copyir.com
1100    Paper feeder lift motor 1 error (optional 3000-sheet paper feeder)
A motor over-current signal is detected continuously for 1 s or longer      copyir.com    Poor contact in the connector terminals      copyir.com Paper feeder lift motor 1 does not rotate correctly (the motor is overloaded)      copyir.com
1110    Paper feeder lift motor 2 error (optional 3000-sheet paper feeder)
A motor over-current signal is detected continuously for 1 s or longer      copyir.com    Poor contact in the connector terminals      copyir.com Paper feeder lift motor 2 does not rotate correctly (the motor is overloaded)      copyir.com
1120    Paper feeder left lift position problem (optional 3000-sheet paper feeder)
Paper feeder switch 2 does not turn on within 30 s of paper feeder lift motor 1 turning on      copyir.com    Poor contact in the connector terminals      copyir.com Defective paper feeder lift switch 2      copyir.com Defective paper feeder lift motor 1      copyir.com The paper feeder left lift does not rise properly      copyir.com
1130    Paper feeder right lift position problem (optional 3000-sheet paper feeder)
Paper feeder switch 1 does not turn on within 30 s of paper feeder lift motor 2 turning on      copyir.com    Poor contact in the connector terminals      copyir.com Defective paper feeder lift switch 1      copyir.com Defective paper feeder lift motor 2      copyir.com Defective paper feeder lift motor 2      copyir.com The paper feeder right lift does not rise properly      copyir.com
1800    Paper feeder unit communication problem (optional paper feeder/3000- sheet paper feeder)
No communication: there is no reply after 5 retries      copyir.com Abnormal communication: a communication error (parity or checksum error) is detected five times in succession      copyir.com    Poor contact in the connector terminals      copyir.com Defective engine PWB      copyir.com Defective paper feeder main PWB      copyir.com
1900    Paper feeder EEPROM error (optional paper feeder)
When writing the data, the write data and the read data is not continuously in agreement three times      copyir.com    Poor contact in the connector terminals      copyir.com Defective engine PWB      copyir.com Defective paper feeder      copyir.com
2000    Drive motor problem
Stable OFF is detected for 1 s continuously after drive motor stability      copyir.com    Poor contact in the connector terminals      copyir.com Defective drive transmission system      copyir.com Defective engine PWB      copyir.com Defective drive motor      copyir.com
2250    Main charger cleaning motor error
The lock signal is detected      copyir.com    Poor contact in the connector terminals      copyir.com Defective drive transmission system      copyir.com Defective engine PWB      copyir.com Defective main charger cleaning motor      copyir.com
2500    Paper feed motor error
Stable OFF is detected for 1 s continuously after paper feed motor stability      copyir.com    Poor contact in the connector terminals      copyir.com Defective drive transmission system      copyir.com Defective engine PWB      copyir.com Defective paper feed motor      copyir.com
2600    Paper feeder paper conveying motor error (optional 3000-sheet paper feeder)
The lock signal of the motor is detected for 450 ms continuously      copyir.com Paper feeder drive motor error (optional paper feeder) The lock signal of the motor is detected for 500 ms continuously      copyir.com    Poor contact in the connector terminals      copyir.com Paper feeder paper conveying motor / paper feeder drive motor does not rotate correctly (the motor is overloaded)      copyir.com Defective PWB      copyir.com Defective motor      copyir.com
4000    Polygon motor synchronization problem
The polygon motor does not reach the stable speed within 20 s of the START signal turning on      copyir.coms    Poor contact in the connector terminals      copyir.com Defective polygon motor      copyir.com Defective engine PWB      copyir.com
4010    Polygon motor steady-state problem
The polygon motor rotation is not stable for 20 s after the polygon motor rotation has been stabilized      copyir.com    Poor contact in the connector terminals      copyir.com Defective polygon motor      copyir.com Defective engine PWB      copyir.com
4200    BD steady-state problem
ASIC detects a BD error A for 2 s after the polygon motor rotation has been stabilized      copyir.com    Poor contact in the connector terminals      copyir.com Defective laser scanner unit      copyir.com Defective engine PWB      copyir.com
5300    Broken cleaning lamp wire
While the cleaning lamp is on, the broken cleaning lamp wire detection signal is detected for 2 s continuously      copyir.com    Defective cleaning lamp      copyir.com Defective engine PWB      copyir.com
6000    Fuser heater brea
Fuser thermistor 1 is detected 40°C/ 104°F below with 10 s continuously during warm-up and ready in      copyir.com    Defective fuser heater M or S      copyir.com Installation defectiveness on fuser thermistor 1      copyir.com Defective fuser thermostat      copyir.com Defective PWB      copyir.com
6020    Abnormally high fuser thermistor temperature
Fuser thermistor 1 or 2 is detected 230°C/446°F or more for 40 ms      copyir.com    Installation defectiveness on fuser thermistor 1 or 2      copyir.com Defective fuser thermistor 1 or 2      copyir.com Defective engine PWB      copyir.com
6030    Fuser thermistor break error
The thermistor break signal is detected continuously for 500 ms      copyir.com    Installation defectiveness on fuser thermistor 1 or 2      copyir.com Defective fuser thermistor 1 or 2      copyir.com Defective engine PWB      copyir.com
6050    Abnormally low fuser thermistor 3 temperature
Fuser thermistor 1 is detected 100°C/ 212°F less than 1 s continuously during copying      copyir.com    Defective fuser heater M or S      copyir.com Installation defectiveness on fuser thermistor 1      copyir.com Defective PWB      copyir.com
6400    Zero-cross signal error
While fuser heater ON/OFF control is performed, the zero-cross signal is not input within 3 s      copyir.com    Defective PWB      copyir.com
6410    Fuser unit connector insertion problem
Absence of the fuser unit is detected      copyir.com    Fuser unit connector inserted incorrectly      copyir.com Defective fuser unit connector      copyir.com
6420    Fuser unit fuse cut problemctor      copyir.com    Poor contact in the connector terminals      copyir.com Fuser unit connector inserted incorrectly      copyir.com
7400    Developing unit connector insertion problem
Absence of the developing unit is detected      copyir.com    Developing unit connector inserted incorrectly      copyir.com Defective developing unit connector      copyir.com
7410    Drum unit connector insertion problem
Absence of the drum unit is detected      copyir.comc    Drum unit connector inserted incorrectly      copyir.com Defective drum unit connector      copyir.com
7800    Broken external thermistor wire
The thermistor output value is 4      copyir.com5 V or more      copyir.com    Poor contact in the connector terminals      copyir.com Defective humidity sensor      copyir.com
7810    Short-circuited external thermistor
The thermistor input value is 0      copyir.com5 V or less      copyir.com    Poor contact in the connector terminals      copyir.com Defective humidity sensor      copyir.com
7900    Drum EEPROM error
Reading from or writing to EEPROM cannot be performed      copyir.com    Poor contact in the connector terminals      copyir.com Defective drum unit      copyir.com
7910    Developing unit EEPROM error Reading from or writing to EEPROM cannot be performed      copyir.com    Poor contact in the connector terminals      copyir.com Defective developing unit      copyir.com
8020    Punch motor problem (optional 3000- sheet document finisher)
The LOCK signal of the punch motor is detected for more than 500 ms while the punch motor is operating      copyir.com    Poor contact in the connector terminals      copyir.com Defective punch motor      copyir.com Defective PWB      copyir.com
8030    Tray upper limit detection problem (optional document finisher)
When the tray elevation motor raises a tray, the ON status of the tray upper limit sensor is detected      copyir.com    The tray upper limit sensor/push paper sensor/surface view sensor connector makes poor contact      copyir.com Defective tray upper limit sensor/ push paper sensor/ surface view sensor      copyir.com Defective finisher main PWB      copyir.com
8050    Paper conveying belt motor 1 problem (optional 3000-sheet document finisher)
Paper conveying belt home position sensor 1 does not turn off within 1      copyir.com5 s      copyir.com Paper conveying belt home position sensor 1 does not turn on within 2      copyir.com5 s      copyir.com Jam 88 is indicated      copyir.com    Poor contact in the connector terminals      copyir.com Defective paper conveying belt home position sensor 1      copyir.com Defective paper conveying belt motor 1      copyir.com Defective PWB      copyir.com
8060    Paper conveying belt motor 2 problem (optional 3000-sheet document finisher)
Paper conveying belt home position sensor 2 does not turn off within 1      copyir.com5 s      copyir.com Paper conveying belt home position sensor 2 does not turn on within 2      copyir.com5 s      copyir.com    Poor contact in the connector terminals      copyir.com Defective paper conveying belt home position sensor 2      copyir.com Defective paper conveying belt motor 2      copyir.com Defective PWB      copyir.com
8070    Internal tray communication error (optional 3000-sheet document finisher)
Communication with the internal tray is not possible although the connection is detected      copyir.com    Poor contact in the connector terminals      copyir.com Defective PWB      copyir.com
8140    Main tray problem (optional 3000- sheet document finisher)
The main tray is not detected by the main tray top limit detection sensor or the main tray capacity detection sensor within 20s since the tray has started ascending      copyir.com The main tray upper limit detection sensor to the main tray load detection sensor is not detected to be turned off in 20 seconds after the main tray has descended      copyir.com The main tray low limit detection sensor is not detected to be turned on in 20 seconds after the main tray has descended      copyir.com During main tray ascent, the main tray upper limit detection sensor or the main tray load detection sensor stays on for more than 2 s      copyir.com    Poor contact in the connector terminals      copyir.com Defective main tray motor      copyir.com Defective main tray upper limit detection sensor/main tray load detection sensor/main tray lower limit detection sensor      copyir.com Defective finisher main PWB      copyir.com
8140    Tray elevation motor problem (optional document finisher)
When the tray elevation motor is driving, the ON status of the tray lower limit sensor or surface view sensor cannot be detected even if a specified time has elapsed      copyir.com    The tray elevation motor connector makes poor contact      copyir.com The tray elevation motor malfunctions      copyir.com The tray lower limit sensor/push paper sensor/surface view sensor connector makes poor contact      copyir.com Defective tray lower limit sensor/ push paper sensor/ surface view sensor      copyir.com Defective finisher main PWB      copyir.com
8170    Side registration motor 1 problem (optional 3000-sheet document finisher)
When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 3 s passed      copyir.com Jam 88 is indicated      copyir.com    Poor contact in the connector terminals      copyir.com Defective side registration motor 1      copyir.com Defective PWB      copyir.com Poor contact in the connector terminals      copyir.com Defective side registration motor 1      copyir.com Defective PWB      copyir.com
8170    Adjustment motor problem (optional document finisher)
When the adjustment motor is driving, the ON status of the adjustment home position sensor cannot be detected even if a specified time has elapsed      copyir.com When adjustment operation starts, the ON status of the adjustment home position sensor is not detected      copyir.com    The adjustment motor connector makes poor contact      copyir.com Defective adjustment motor      copyir.com The adjustment home position sensor connector makes poor contact      copyir.com Defective adjustment home position sensor      copyir.com Defective finisher main PWB      copyir.com
8180    Side registration motor 2 problem (optional 3000-sheet document finisher)
When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 3 s passed      copyir.com Jam 88 is indicated      copyir.com    Poor contact in the connector terminals      copyir.com Defective side registration motor 2      copyir.com Defective PWB      copyir.com
8210    Stapler shift motor 1 error (optional 3000-sheet document finisher)
When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 1      copyir.com5 s passed      copyir.com    Poor contact in the connector terminals      copyir.com Defective stapler shift motor 1      copyir.com Defective finisher main PWB      copyir.com
8210    Stapler problem (optional document finisher)
When the stapler motor is driving, the ON status of the stapler home position sensor cannot be detected even if a specified time has elapsed      copyir.com    The stapler connector makes poor contact      copyir.com The stapler is blocked with a staple      copyir.com The stapler is broken      copyir.com Defective finisher main PWB      copyir.com
8220    Stapler shift motor 2 error (optional 3000-sheet document finisher)
When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 3      copyir.com5 s passed      copyir.com    Poor contact in the connector terminals      copyir.com Defective stapler shift motor 2      copyir.com Defective finisher main PWB      copyir.com
8230    Stapler motor problem (optional 3000- sheet document finisher)
Jam 82 is indicated      copyir.com    Poor contact in the connector terminals      copyir.com Defective stapler motor      copyir.com Defective finisher main PWB      copyir.com
8300    Centerfold unit communication error (optional centerfold unit of 3000-sheet document finisher)
Communication with the centerfold unit is not possible although the connection is detected      copyir.com    Poor contact in the connector terminals      copyir.com Defective centerfold unit set switch      copyir.com Defective finisher main PWB      copyir.com
8310    Centerfold side registration motor 1 problem (optional centerfold unit of 3000-sheet document finisher)
The home position is not detected when initial operation even if 1000 ms passed      copyir.com    Poor contact in the connector terminals      copyir.com Defective centerfold side registration motor 1      copyir.com Defective PWB      copyir.com
8320    Centerfold paper conveying belt motor problem (optional centerfold unit of 3000-sheet document finisher)
The home position is not detected when initial operation even if 2500 ms passed      copyir.com    Poor contact in the connector terminals      copyir.com Defective centerfold paper conveying belt motor 1/2      copyir.com Defective PWB      copyir.com
8330    Blade motor problem (optional centerfold unit of 3000-sheet document finisher)
The home position is not detected when initial operation even if 1500 ms passed    Poor contact in the connector terminals      copyir.com Defective blade motor      copyir.com Defective PWB      copyir.com
8340    Centerfold staple motor problem (optional centerfold unit of 3000-sheet document finisher)
Jam89 is indicated      copyir.com    Poor contact in the connector terminals      copyir.com Defective centerfold staple motor      copyir.com Defective PWB      copyir.com
8350    Centerfold side registration motor 2 problem (optional centerfold unit of 3000-sheet document finisher)
The home position is not detected when initial operation even if 1000 ms passed      copyir.com    Poor contact in the connector terminals      copyir.com Defective centerfold side registration motor 2      copyir.com Defective PWB      copyir.com
8360    Centerfold main motor problem (optional centerfold unit of 3000-sheet document finisher)
The motor lock signal is detected above 1000 ms during driving the centerfold main motor      copyir.com    Poor contact in the connector terminals      copyir.com Defective centerfold main motor      copyir.com Defective PWB      copyir.com
8440    Sensor adjusting problem (optional document finisher)
The sensor cannot be adjusted within the specified range    The paper entry sensor connector makes poor contact      copyir.com Defective paper entry sensor      copyir.com The optical path of the paper entry sensor is blocked by foreign matter       copyir.comDefective finisher main PWB      copyir.com
8460    EEPROM problem (optional document finisher)
Reading from or writing to EEPROM cannot be performed      copyir.com    Defective EEPROM or finisher main PWB      copyir.com
8500    Mail box communication error (optional mail box of 3000-sheet document finisher)
Communication with the mail box is not possible although the connection is detected      copyir.com    Poor contact in the connector terminals      copyir.com Defective PWB      copyir.com
8510    Mail box drive motor problem (optional mail box of 3000-sheet document finisher)
The motor lock signal is detected above 500 ms during driving the mail box drive motor      copyir.com    Poor contact in the connector terminals      copyir.com Defective mail box drive motor      copyir.com Defective PWB      copyir.com
8800    Document finisher communication problem (optional 3000-sheet document finisher)
No communication: there is no reply after 5 retries      copyir.com Abnormal communication: a communication error (parity or checksum error) is detected five times in succession      copyir.coms    Poor contact in the connector terminals      copyir.com Defective PWB      copyir.com
8900    Backup memory data problem (optional 3000-sheet document finisher)
Read and write data does not match      copyir.com    Poor contact in the connector terminals      copyir.com Defective finisher main PWB      copyir.com
8910    Backup memory data problem (optional 3000-sheet document finisher)
Read and write data does not match      copyir.com    Poor contact in the connector terminals      copyir.com Defective punch PWB      copyir.com
8920    Backup memory data problem (optional mail box of 3000-sheet document finisher)
Read and write data does not match      copyir.com    Poor contact in the connector terminals      copyir.com Defective mail box main PWB      copyir.com
8930    Backup memory data problem (optional centerfold unit of 3000-sheet document finisher)
Read and write data does not match      copyir.com    Poor contact in the connector terminals      copyir.com Defective centerfold main PWB      copyir.com
F000    Operation panel PWB communication error    Defective main PWB      copyir.com Defective operation panel PWB      copyir.com
F010    Main PWB checksum error    Defective main PWB      copyir.com
F020    Memory checksum error    Defective main PWB      copyir.com
F030    Main PWB system error    Defective main PWB      copyir.com
F040    Engine PWB communication error    Defective main PWB      copyir.com Defective engine PWB      copyir.com
F226    VIDEO output error    Defective main PWB      copyir.com