کیو سرا میتا km2050

C0100    Backup memory read/write problem (main PWB) Read and write data does not match     copyir.com    Defective main PWB     copyir.com
C0110    Backup memory data problem (main PWB) Data in the specified area of the backup memory does not match the specified values     copyir.com    Problem with the backup memory data     copyir.com Defective backup RAM     copyir.com
C0150    Backup memory read/write problem (engine PWB) Read and write data does not match     copyir.com    Defective engine PWB     copyir.com
C0160    Backup memory data problem (engine PWB) Data in the specified area of the backup memory does not match the specified values     copyir.com    Problem with the backup memory data     copyir.com Defective backup RAM     copyir.com
C0170    Accounting count problem When the power is turned on, the total count and the scan count are abnormal both on the main PWB and the engine PWB     copyir.com    Defective main PWB or engine PWB     copyir.com
C0180    Machine number mismatch When the power is turned on, the machine number does not match between the main PWB and the engine PWB     copyir.com    Data damage of EEPROM     copyir.com
C0210    Communication problem between the main PWB and engine board PWB When the power is turned on, the machine does not detect the low level of SBSY and the high level of SDIR for 10 seconds     copyir.com    Poor contact in the connector terminals     copyir.com Defective main PWB or engine PWB     copyir.com
C0240    Optional printer board PWB communication problem The printer board PWB does not respond 120 s after the power is turned on     copyir.com    Poor contact in the connector terminals     copyir.com Defective main PWB or printer board PWB     copyir.com
C0410    Optional DP communication problem Communication fails five times successively     copyir.com    DP installed incorrectly     copyir.com Defective main PWB or DP driver PWB     copyir.com
C0420    Optional first paper feeder communication problem Communication fails five times successively     copyir.com    Paper feeder installed incorrectly     copyir.com Defective main PWB or drawer main PWB     copyir.com
C0500    Optional second paper feeder communication problem Communication fails five times successively     copyir.com    Paper feeder installed incorrectly     copyir.com Defective main PWB or drawer main PWB     copyir.com
C0510    Optional third paper feeder communication problem Communication fails five times successively     copyir.com    Paper feeder installed incorrectly     copyir.com Defective main PWB or drawer main PWB     copyir.com
C0610    Bitmap (DIMM) problem There is a problem with the data or address bus of the bitmap DRAM     copyir.com    Defective main PWB     copyir.com DIMM installed incorrectly     copyir.com Defective DIMM     copyir.com
C0620    Memory input interface problem Reading-in of an image does not complete within 10 s of the start of image transmission     copyir.com    Defective main PWB     copyir.com
C0630    DMA problem DMA transmission of compressed, decompressed, rotated, relocated or blanked-out image data does not complete within the specified period of time     copyir.com    Defective main PWB     copyir.com
C0800    Image processing problem JAM05 is detected twice    Defective engine PWB     copyir.com
C2000    Drive motor problem LOCK ALM signal remains high for 1 s, 1 s after the drive motor has turned on     copyir.com    Poor contact of the connector terminals     copyir.com Defective drive motor rotation control circuit     copyir.com Defective drive transmission system     copyir.com
C3100    Scanner carriage problem The home position is not correct when the power is turned on or copying the document placed on the contact glass     copyir.com    Poor contact of the connector terminals     copyir.com Defective scanner home position switch     copyir.com Defective engine PWB     copyir.com Defective scanner motor     copyir.com
C3200    Exposure lamp problem Non-lighting of the exposure lamp is detected at the beginning of copying     copyir.com    Poor contact of the connector terminals     copyir.com Defective exposure lamp or inverter PWB     copyir.com Defective engine PWB     copyir.com Incorrect shading position     copyir.com
C3300    Optical system (AGC) problem After AGC, correct input is not obtained at CCD     copyir.com    Insufficient exposure lamp luminosity     copyir.com Defective engine PWB     copyir.com Incorrect shading position     copyir.com Defective CCD PWB     copyir.com
C4000    Polygon motor synchronization problem The polygon motor does not reach the stable speed within 20 s of the START signal turning on     copyir.com    Poor contact in the polygon motor connector terminals     copyir.com Defective polygon motor     copyir.com Defective engine PWB     copyir.com
C4010    Polygon motor steady-state problem The polygon motor rotation is not stable for 5 s after the polygon motor rotation has been stabilized     copyir.com    Poor contact in the polygon motor connector terminals     copyir.com Defective polygon motor     copyir.com Defective engine PWB     copyir.com
C4200    BD steady-state problem The MIC detects a BD error for 600 ms after the polygon motor rotation has been stabilized     copyir.com    Defective laser diode     copyir.com Defective polygon motor     copyir.com Defective main PWB     copyir.com Defective engine PWB     copyir.com
C6000    Broken fuser heater wire The temperature does not become 100C/212F even if 30 s pass before secondary stabilization     copyir.com When there is no 1C/1     copyir.com8F rise in 5 s before secondary stabilization     copyir.com    Poor contact in the thermistor connector terminals     copyir.com Fuser thermistor installed incorrectly     copyir.com Fuser thermostat triggered     copyir.com Fuser heater M or S installed incorrectly     copyir.com Broken fuser heater M or S wire     copyir.com
C6020    Abnormally high fuser unit thermistor temperature The fuser temperature exceeds 230C/ 446F for 40 ms     copyir.com    Shorted thermistor     copyir.com Broken heater control circuit on the power supply PWB     copyir.com
C6050    Abnormally low fuser unit thermistor temperature The fuser temperature remains below 90C/194F for 1 s     copyir.com    Poor contact in the thermistor connector terminals     copyir.com Broken fuser thermistor wire     copyir.com Fuser thermistor installed incorrectly     copyir.com Fuser thermostat triggered     copyir.com Fuser heater M or S installed incorrectly     copyir.com Broken fuser heater M or S wire     copyir.com
C6400    Zero-crossing signal problem The engine PWB does not detect the zero-crossing signal for the time specified below     copyir.com At power-on: 3 s Others: 5 s    Poor contact in the connector terminals     copyir.com Defective power supply PWB     copyir.com Defective engine PWB     copyir.com
C7750    Drum type mismatch problem A The drum type does not mach with the software     copyir.com    Defective software of the engine PWB     copyir.com Defective engine PWB     copyir.com
C7760    Drum type mismatch problem B The drum type is undefined     copyir.com    Defective software of the engine PWB     copyir.com Defective engine PWB     copyir.com
C7800    Broken external temperature thermistor The input voltage is 0     copyir.com5 V or less     copyir.com    Poor contact in the humidity sensor connector terminals     copyir.com Defective humidity sensor     copyir.com
C7810    Short-circuited external temperature thermistor The input voltage is 4     copyir.com5 V or more     copyir.com    Poor contact in the humidity sensor connector terminals     copyir.com Defective humidity sensor     copyir.com

پست های مرتبط

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

جستجو در مطالب

سوالی دارید؟

برای آگاهی از راه های ارتباط با ما، بر روی دکمه زیر کلیک کنید

مطالب جدید ...

در خبرنامه ما عضو شوید