کیو سرا میتا m2030pn

کیو سرا میتا m2030pn

0030    FAX control PWB system error
Processing with the fax software was disabled due to a hardware problem      copyir.com    Defective FAX control PWB      copyir.com
0070    FAX control PWB incompatible detection Error
Abnormal detection of FAX control PWB incompatibility In the initial communication with the FAX control PWB, any normal communication command is not transmitted      copyir.com    Defective fax software      copyir.com Defective FAX control PWB      copyir.com
0100    Backup memory device error    Defective flash memory      copyir.com Defective control PWB      copyir.com Defective flash memory      copyir.com Defective control PWB      copyir.com
0120    MAC address data error    Defective flash memory      copyir.com
0130    Backup memory read/write error    Defective flash memory      copyir.com Defective control PWB
0140    Backup memory data error    Defective flash memory      copyir.com Defective control PWB      copyir.com
0150    Control PWB EEPROM error
Detecting control PWB EEPROM (U17) communication error      copyir.com    Improper installation control PWB EEPROM (U17)      copyir.com Defective control PWB      copyir.com
0170    Billing counting error    Defective control PWB      copyir.com Data damage of control PWB EEPROM (U17)      copyir.com
0180    Machine number mismatch
Machine number of main and engine does not match      copyir.com    The main PWB or the engine PWB were exchanged      copyir.com Data damage of control PWB EEPROM (U17)      copyir.com
0420    Paper feeder communication error
Communication error between control PWB and optional paper feeder      copyir.com    Improper installation paper feeder      copyir.com Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion      copyir.com Defective control PWB      copyir.com Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion      copyir.com Defective PF mainPWB      copyir.com
0830    FAX control PWB flash program area checksum error
A checksum error occurred with the program of the FAX control PWB      copyir.com    Defective fax software      copyir.com Defective FAX control PWB      copyir.com
0840    Faults of RTC
The time is judged to go back based on the comparison of the RTC time and the current time or five years or more have passed      copyir.com    Defective control PWB      copyir.com The battery is disconnected from the control PWB      copyir.com
0870    FAX control PWB to control PWB high capacity data transfer problem
High-capacity data transfer between the FAX control PWB and the control PWB of the machine was not normally performed even if the data transfer was retried the specified times      copyir.com    Improper installation FAX control PWB      copyir.com Defective FAX control PWB or control PWB      copyir.com
0920    Fax file system error
The backup data is not retained for file system abnormality of flash memory of the FAX control PWB      copyir.com    Defective FAX control PWB      copyir.com
2000    Main motor error
The main motor ready input is not given for 2 s during the main motor is ON      copyir.com    Defective harness between main motor (CN1) and control PWB (YC17), or improper connector insertion      copyir.com Defective drive transmission system of the main motor      copyir.com Defective main motor      copyir.com Defective control PWB      copyir.com
2610    PF paper feed motor error (paper feeder)
The PF paper feed motor of cassette 2 ready input is not given for 2 s during the PF paper feed motor is ON      copyir.com    Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion      copyir.com Defective PF paper feed motor drive transmission system      copyir.com Defective PF main motor      copyir.com Defective control PWB      copyir.com
2620    PF paper feed motor error (Paper feeder)
The PF paper feed motor of cassette 3 ready input is not given for 2 s during the PF paper feed motor is ON      copyir.com    Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion      copyir.com Defective PF paper feed motor drive transmission system      copyir.com Defective PF main motor      copyir.com Defective control PWB      copyir.com
3100    ISU home position errorr      copyir.com    Defective FFC between CCD PWB (YC1) and control PWB (YC8)      copyir.com Defective FFC between control PWB (YC6) and scanner PWB (YC103), or improper FFC insertion      copyir.com Defective home position sensor      copyir.com Defective harness between ISU motor and scanner PWB (YC104), or improper connector insertion      copyir.com Defective ISU motor      copyir.com
3200    Exposure lamp error
The exposure lamp is not turned on      copyir.com    Defective FFC between scanner PWB (YC103) and control PWB (YC6), or improper FFC insertion      copyir.com Defective FFC between CCD PWB (YC1) and control PWB (YC8)      copyir.com Defective harness between CCD PWB (YC3) and LED drive PWB (YC1), or improper connector insertion      copyir.com Defective harness between LED drive PWB (YC2) and exposure lamp, or improper connector insertion      copyir.com Defective exposure lamp      copyir.comsensor      copyir.com Defective LED drive PWB      copyir.com Defective control PWB      copyir.com
3300    AGC error
After AGC, correct input is not obtained at CCD      copyir.com    Defective FFC between CCD PWB (YC1) and control PWB (YC8)      copyir.com Defective exposure lamp      copyir.comsensor      copyir.com Defective CCD PWB      copyir.com Defective control PWB      copyir.com
3500    CPU – ASIC (CCD PWB) communication error
An error code is detected      copyir.com    Defective FFC between CCD PWB (YC1) and control PWB (YC8)      copyir.com Defective CCD PWB      copyir.com Defective control PWB      copyir.com
4000    Polygon motor (laser scanner unit) error
The polygon motor ready input is not given for 6 s during the polygon motor is ON      copyir.com    Defective harness between polygon motor and control PWB (YC10), or improper connector insertion      copyir.com Defective laser scanner unit      copyir.com Defective control PWB      copyir.com
4200    BD error (laser scanner unit) error    BD sensor does not detect laser beam due to condensation on the polygon mirror      copyir.com Defective laser scanner unit      copyir.com Defective control PWB      copyir.com
4700    VIDEO ASIC device error
Mismatch of reading data from two locations occurs eight times successively      copyir.com Mismatch between writing data and reading data occurs eight times successively      copyir.com    Defective connector cable or poor contact in the connector      copyir.com Defective control PWB      copyir.com
6000    Broken Fuser heater wire
The fuser temperature does not rise after the Fuser heater has been turned on      copyir.com    Poor contact in the fuser thermistor connector terminals      copyir.com Poor contact in the Fuser heater connector terminals      copyir.com Fuser thermistor installed incorrectly      copyir.com Fuser thermal cutout triggered      copyir.com Fuser heater installed incorrectly      copyir.com Broken Fuser heater wire      copyir.com
6020    Abnormally high fuser thermistor temperature
Fuser thermistor detects abnormally temperature      copyir.com When the temperature of a fuser thermistor detects 195 °C or more at the time of heater OFF and 155 °C or more      copyir.com    Shorted fuser thermistor      copyir.com Defective control PWB      copyir.com
6030    Broken fuser thermistor wire
Input from fuser thermistor is 0 (A/D value)      copyir.com    Poor contact in the fuser thermistor connector terminals      copyir.com Broken fuser thermistor wire      copyir.com Fuser thermistor installed incorrectly      copyir.com Fuser thermal cutout triggered      copyir.com Fuser heater installed incorrectly      copyir.com Broken Fuser heater wire      copyir.com
6400    Zero cross signal error
The zero cross signal does not reach the control PWB for specified time      copyir.com    Defective harness between high voltage PWB (CN202) and control PWB (YC23), or improper connector insertion      copyir.com Defective connection between power source PWB (YC103) and high voltage PWB (CN201)      copyir.com Defective power source PWB      copyir.com Defective control PWB      copyir.com
7990    Waste toner full
The waste toner sensor has detected that the waste toner reservoir (drum unit) is full      copyir.com    Waste toner reservoir (drum unit) is full      copyir.com Defective waste toner sensor      copyir.com Defective control PWB      copyir.com
F000    Control PWB – Operation panel PWB communication error    Defective harness between operation panel PWB (YC1) and control PWB (YC7), or improper connector insertion      copyir.com motor is ON      copyir.com Defective operation panel PWB      copyir.com Defective control PWB      copyir.com
F020    Control PWB RAM checksum error    Defective main memory (RAM) on the control PWB      copyir.com Defective expanded memory (DIMM)      copyir.com
F040    Control PWB engine communication error
A communication error is detected      copyir.com    Defective control PWB      copyir.com
F041    Control PWB – scanner PWB communication error
A communication error is detected      copyir.com    Defective control PWB or scanner PWB      copyir.com
F050    Control PWB engine checksum error    Some error may have occurred when downloading the firmware of the control PWB      copyir.com Defective control PWB      copyir.com
F186    Control PWB video data control error    Defective control PWB      copyir.com