لمینت MKP
1402-06-04
Menu
C010 Drive system related service call
Main motor abnormality: The main motor is not rotating normally copyir.com
C040 PFP motor abnormality: The PFP motor is not rotating normally copyir.com
C130 Upper drawer tray abnormality: The upper drawer tray motor is not rotating or the upper drawer tray is not moving normally copyir.com
C140 Lower drawer tray abnormality: The lower drawer tray motor is not rotating or the lower drawer tray is not moving normally copyir.com
C150 PFP upper drawer tray abnormality: The PFP upper drawer tray motor is not rotating or the PFP upper drawer tray is not moving normally copyir.com
C160 PFP lower drawer tray abnormality: The PFP lower drawer tray motor is not rotating or the PFP lower drawer tray is not moving normally copyir.com
C180 LCF tray-up motor abnormality: The LCF tray-up motor is not rotating or the LCF tray is not moving normally copyir.com
C1A0 LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally copyir.com
C1B0 LCF transport motor abnormality: The LCF transport motor is not rotating normally copyir.com
C260 Peak detection error: Lighting of the exposure lamp (white reference) is not detected when power is turned ON copyir.com
C270 Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time copyir.com
C280 Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time copyir.com
C410 Thermistor or heater abnormality at power-ON: Abnormality of service call the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON copyir.com
C440 Heater abnormality after abnormality judgment: The temperature of the fuser roller has exceeded the range of control (in this case, the main switch turns OFF automatically) or does not even reach the range copyir.com
C450 Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing copyir.com
C550, C780 RADF I/F error: Communication error has occurred between the RADF and the scanner copyir.com
C570 Communication error between Engine-CPU and IPC board
C580 Communication error between IPC board and finisher
C730 EEPROM initialization error: EEPROM is not initialized normally when performing the code 05-356 copyir.com
C810 Fan motor abnormality: The fan motor is not rotating normally copyir.com
C820 Read sensor adjustment error: The read sensor cannot be adjusted normally when performing the code 05-356
C830 Original length sensor adjustment error: The original length sensor cannot be adjusted normally when performing the code 05-356 copyir.com
C940 Circuit related service call
Engine-CPU abnormality
C970 Process related service call
High-voltage transformer abnormality: Leakage of the main charger is detected copyir.com
CA10 Polygonal motor abnormality: The polygonal motor is not rotating normally copyir.com
CA20 H-Sync detection error: H-Sync detection PC board cannot detect laser beams copyir.com
CB10 Transport motor abnormality: The transport motor or stack transport roller is not rotating normally copyir.com [MJ-1025]
CB20 Delivery motor abnormality: Delivery motor or delivery roller is not rotating normally copyir.com [MJ-1022/1025]
CB30 Tray lift motor abnormality: The tray lift motor is not rotating normally or the delivery tray is not moving normally copyir.com [MJ-1025]
CB50 Staple motor (staple/fold) abnormality: The staple motor is not rotating normally or the stapler is not moving normally copyir.com [MJ-1025]
CB60 Stapler unit shift motor abnormality: The stapler unit shift motor is not rotating normally or the Stapler Unit is not moving normally copyir.com [MJ-1025]
CB80 Backup RAM data abnormality:
1) Abnormality of checksum value on finisher controller board is detected when the power is turned on copyir.com [MJ-1025]
2) Abnormality of checksum value on punch controller board is detected when the power is turned on copyir.com [MJ-1025 (when MJ-6005 is installed)]
CC30 Stack processing motor abnormality: The stack processing motor is not rotating normally or the stack delivery belt is not moving normally copyir.com [MJ-1022] Paddle motor abnormality: The paddle motor is not rotating normally or the swing guide is not moving normally copyir.com [MJ-1025]
CC50 Horizontal registration motor abnormality: The horizontal registration motor is not rotating normally or the puncher is not moving normally copyir.com [MJ-1025 (when MJ-6005 is installed)]
CC60 Punch motor abnormality: The punch motor is not rotating normally or the puncher is not moving normally copyir.com [MJ-1025 (when MJ-6005 is installed)]
CC80 Front jogging motor abnormality: Front jogging motor is not rotating normally or the front alignment plate is not moving normally copyir.com [MJ-1022] Alignment motor (front) abnormality: The alignment motor (front) is not rotating normally or the front alignment plate is not moving normally copyir.com [MJ-1025]
CC90 Upper stack tray lift motor abnormality: The upper stack tray lift motor is not rotating or the upper stack tray is not moving normally copyir.com [MJ-1022]
CCA0 Lower stack tray lift motor abnormality: The lower stack tray lift motor is not rotating or the lower stack tray is not moving normally copyir.com [MJ-1022]
CCB0 Rear jogging motor abnormality: Rear jogging motor is not rotating normally or the rear alignment plate is not moving normally copyir.com [MJ-1022] Alignment motor (rear) abnormality: The alignment motor (rear) is not rotating normally or the rear alignment plate is not moving normally copyir.com [MJ-1025]
CDC0 Punch power failure abnormality: 24 V is not applied to the punch controller board copyir.com [MJ-1025 (when MJ-6005 is installed)]
CDD0 Folding position sensor abnormality: Automatic adjustment of the folding position sensor can not be performed properly copyir.com [MJ-1025]
CDE0 Paddle motor abnormality: The paddle motor does not rotate properly copyir.com [MJ-1025]
CDF0 Initialization error of the offset tray: The home position of the separator cannot be detected when the power is turned ON copyir.com
CE00 Communication error between finisher unit and puncher unit: Communication error between the finisher controller PC board and punch controller PC board copyir.com [MJ-1025 (when MJ-6005 is installed)]
CF60 Toner for recycle transport area lock
E010 Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor copyir.com
E020 Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor copyir.com
E030 Power-ON jam: The paper is remaining on the paper transport path when power is turned ON copyir.com
E090 HDD abnormality causes jam: Image data to be printed cannot be prepared copyir.com
E110 ADU misfeeding (Paper not reaching the 1st transport sensor): The paper which has passed through ADU does not reach the 1st transport sensor during duplex printing copyir.com
E120 Bypass misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the bypass tray does not reach the 1st transport sensor copyir.com
E130 Upper drawer misfeeding (Paper not reaching the 1st transport sensor): The paper fed from the upper drawer does not reach the 1st transport sensor copyir.com
E140 Lower drawer misfeeding (Paper not reaching the 2nd transport sensor): The paper fed from the lower drawer does not reach the 2nd transport sensor copyir.com
E150 PFP upper drawer misfeeding (Paper not reaching the PFP upper drawer feed sensor): The paper fed from the PFP upper drawer does not reach the PFP upper drawer feed sensor
E160 PFP lower drawer misfeeding (Paper not reaching the PFP lower drawer feed sensor): The paper fed from the PFP lower drawer does not reach the PFP lower drawer feed sensor copyir.com
E190 LCF misfeeding (Paper not reaching the LCF feed sensor): The paper fed from the LCF does not reach the LCF feed sensor
E200 Upper drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E210 Lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E220 Lower drawer transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the lower drawer feed sensor copyir.com
E270 Bypass transport jam (paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E280 ADU transport jam (paper not reaching the registration sensor): The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing copyir.com
E300 PFP upper drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E310 PFP upper drawer transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor copyir.com
E320 PFP upper drawer transport jam (Paper not reaching the 2nd transport sensor): The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor copyir.com
E330 PFP lower drawer transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E340 PFP lower drawer transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the PFP lower drawer feed sensor copyir.com
E350 PFP lower drawer transport jam (Paper not reaching the 2nd transport sensor): The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor copyir.com
E360 PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensor): The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor copyir.com
E3C0 LCF transport jam (Paper not reaching the registration sensor): The paper does not reach the registration sensor after it has passed the 1st transport sensor copyir.com
E3D0 LCF transport jam (Paper not reaching the 1st transport sensor): The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor copyir.com
E3E0 LCF transport jam (Paper not reaching the 2nd transport sensor): The paper does not reach the 2nd transport sensor after it has passed the LCF feed sensor
E400 Transfer cover open jam: The transfer cover has opened during printing copyir.com
E410 Front cover open jam: The front cover has opened during printing copyir.com
E420 PFP side cover open jam: The PFP side cover has opened during printing copyir.com
E430 ADU open jam: The ADU has opened during printing copyir.com
E440 Side cover open jam: The side cover has opened during printing copyir.com
E450 LCF side cover open jam: The LCF side cover has opened during printing copyir.com
E480 Bridge unit open jam: The bridge unit has opened during printing copyir.com
E490 Job separator cover open jam: The job separator cover has opened during printing copyir.com
E491 Offset tray cover open jam: The offset tray cover has opened during printing copyir.com
E510 Stop jam in the ADU: The paper does not reach the ADU exit sensor after it has passed the ADU entrance sensor copyir.com
E520 Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section copyir.com
E550 Paper remaining jam on the transport path: The paper is remaining on the transport path when printing is finished (caused by a multiple paper feeding) copyir.com
E711 Jam not reaching the original length sensor: The original fed from the original feeding tray does not reach the original length sensor copyir.com
E712 Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor copyir.com
E713 Stop jam at the original length sensor: The trailing edge of the original does not pass the original length sensor after its leading edge has reached this sensor copyir.com
E714 Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray copyir.com
E721 Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse side) or the reverse sensor (when scanning reverse side) copyir.com
E722 Jam not reaching the exit sensor (during scanning): The original which passed the read sensor does not reach the exit sensor when it is transported from the scanning section to exit section copyir.com
E723 Jam not reaching the reverse sensor (during scanning): The original which passed the read sensor does not reach the reverse sensor when it is transported from the scanning section to reverse section copyir.com
E724 Stop jam at the registration sensor: The trailing edge of the original does not pass the registration sensor after its leading edge has reached this sensor copyir.com
E725 Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor copyir.com
E726 Transport/exit signal reception jam: RADF receives the transport/exit reception signal from the equipment when no original is at the exposure waiting position copyir.com
E731 Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its leading edge has reached this sensor copyir.com
E741 Stop jam at the reverse sensor: The trailing edge of the original does not pass the reversal sensor after its leading edge has reached this sensor copyir.com
E742 Jam not reaching the reverse sensor (during reverse feeding): The leading edge of the original does not reach the reverse sensor when original is fed from the reverse section copyir.com
E743 Jam not reaching the exit sensor (during reverse feeding): The original does not reach the exit sensor after it has passed the reverse sensor when the original is exited from the reverse section copyir.com
E860 RADF jam access cover open: The RADF jam access cover has opened during RADF operation copyir.com
E870 RADF open jam: RADF has opened during RADF operation copyir.com
E910 Jam at the bridge unit transport sensor-1: The paper does not reach the bridge unit transport sensor- 1 after it has passed the exit sensor copyir.com
E920 Stop jam at the bridge unit transport sensor-1: The trailing edge of the paper does not pass the bridge unit transport sensor-1 after its leading edge has reached the sensor copyir.com
E930 Jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-1 copyir.com
E940 Stop jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-2 copyir.com
E950 Jam not reaching the job separator transport sensor: The paper has passed through the exit sensor does not reach the job separator transport sensor copyir.com
E951 Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor copyir.com
E960 Jam not reaching the offset tray transport sensor: The paper has passed through the exit sensor does not reach the offset tray transport sensor copyir.com
E961 Stop jam at the offset tray transport sensor: The trailing edge of the paper does not pass the offset tray transport sensor copyir.com
E9F0 Finisher jam (Puncher unit)
Punching jam: Punching is not performed properly copyir.com [MJ-1025 (When MJ-6005 is installed)]
EA10 Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor copyir.com [MJ-1022/1025]
EA20 Paper transport stop jam: The paper does not pass through the inlet sensor copyir.com [MJ-1022/1025]
EA30 Power-ON jam: Paper exists at the inlet sensor when power is turned ON copyir.com [MJ-1022/1025]
EA40 Door open jam: The finisher has been released from the equipment during printing copyir.com [MJ-1022/1025]
EA50 Stapling jam: Stapling is not performed properly copyir.com [MJ-1022/1025]
EA60 Early arrival jam: The inlet sensor detects the paper earlier than a specified timing copyir.com [MJ-1022]
EA70 Stack delivery jam: It cannot deliver the stack of paper on the intermediary process tray to the stack tray copyir.com [MJ-1022/1025]
EAB0 Saddle paper transport stop jam: The paper which passed through the inlet sensor does not reach or pass through the folding position sensor copyir.com [MJ-1025]
EAC0 Saddle transport delay jam: The paper which has reached the inlet sensor does not pass through this sensor copyir.com [MJ-1025]
EAD0 Other paper jam
Print end command time-out jam: The printing has not finished normally because of the communication error between the SYS board and LGC board at the end of printing copyir.com
EAE0 Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher copyir.com
EAF0 Stack return jam: It cannot load the paper which passed through the delivery roller on the intermediary process tray copyir.com [MJ-1022]
EB30 Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing copyir.com
EB50 Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper copyir.com
EB60 Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at [EB50]) copyir.com
F070 Communication error between System-CPU and Engine- CPU
F090 SRAM abnormality on the SYS board
F091 NVRAM abnormality on the SYS board
F092 SRAM and NVRAM abnormality on the SYS board
F100 HDD format error: HDD cannot be initialized normally copyir.com
F101 HDD unmounted: Connection of HDD cannot be detected copyir.com
F102 HDD start error: HDD cannot become ‘Ready’ state copyir.com
F103 HDD transfer time-out: Reading/writing cannot be performed in the specified period of time copyir.com
F104 HDD data error: Abnormality is detected in the data of HDD copyir.com
F105 HDD other error
F106 Point and Print partition damage
F107 SHR partition damage
F108 SHA partition damage
F110 Communication error between System-CPU and Scanner- CPU
F111 Scanner response abnormality
F120 Database abnormality: Database is not operating normally copyir.com
F130 Invaid MAC address
F200 Data overwrite kit (GP-1050/1060) is taken off
اشتراک گذاری در:
در خبرنامه ما عضو شوید
تمامی حقوق این سایت متعلق به کپی ایران بوده و هر گونه بهرهبرداری از آن مستلزم کسب اجازه میباشد.