ایرادات دستگاههای شارپ بر اساس کد می باشد. شرکت کپی ایران در نظر دارد تمامی سرویس مانوئلها و رفع ایرادات را در اختیار شما عزیزان قرار دهد.
CH TD cartridge not installed Check if TD cartridge is installed copyir.com E7-03 HSYNC cannot be detected copyir.com LSU (laser diode, reception element, APC circuit) trouble LSU drive circuit (ASIC) trouble E7-04 CCD white level trouble CCD drive circuit (CCD PWB, ASIC harness) trouble Copy lamp lighting trouble (Copy lamp, invertor PWB) E7-05 CD black level trouble CCD drive circuit (CCD PWB, ASIC, harness) trouble E7-12 Shading trouble (white correction) Dirt on white plate for scanning white level E7-14 ASIC connection trouble Improper connection between CPU and ASIC (pattern cut, improper connection of lead pin) E7-15 Copy lamp OFF trouble Copy lamp or copy lamp drive circuit (invertor PWB) trouble Copy lamp disconnection H2-00 Thermistor open detection The fusing thermistor is open copyir.com H3-00 Heat roller abnormally high temperature The fusing temperature rises above 240°C copyir.com H4-00 Heat roller abnormally low temperature The fusing temperature does not reach 185°C within 27 sec of turning on the power, or the fusing temperature keeps at 140°C copyir.com L1-00 Feed is not completed within the specified time copyir.com When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn OFF copyir.com Or when the mirror base is fed for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MHPS) does not turn OFF copyir.com L3-00 Return is not completed within the specified time copyir.com When the mirror base is returned for the specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON copyir.comOr when the mirror base is returned for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MHPS) does not turn ON copyir.com L4-01 Main motor lock When the main motor encoder pulse is not detected for 100msec copyir.com L6-10 Polygon motor lock The lock signal (specified rpm signal) does not return within a certain time (about 20sec) from starting the polygon motor rotation U2-01 Counter sum check error When the counter check sum value stored in the EEPROM is abnormal copyir.com U2-04 EEPROM serial communication error When a communication trouble occurs with the EEPROM copyir.com
اشتراک گذاری در:
نشانی ایمیل شما منتشر نخواهد شد. بخشهای موردنیاز علامتگذاری شدهاند *
دیدگاه *
نام *
ایمیل *
وب سایت
ذخیره نام، ایمیل و وبسایت من در مرورگر برای زمانی که دوباره دیدگاهی مینویسم.
Δ
برای آگاهی از راه های ارتباط با ما، بر روی دکمه زیر کلیک کنید
در خبرنامه ما عضو شوید