Resetting Method

E08

[When compressing]

• • If the light path of the Master compressing sensor is not opened within 10 seconds after the Master compressing motor is activated.

[ When returning back ]

• • If the light path of the Master compressing sensor is not opened ( or closed) within 1 second after the Master compressing motor is activated.

Communication Error between TR and Interface Accessaries

• • If a communication error has occurred between the CPU and the interface accessaries.

Turn Power SW OFF & ON.

• If the Shading compensation is not made.

• • If the Cutter position switch is not turned OFF within 75 ms after the Cutter motor is activated.
• • If the Cutter position switch is not pressed within 450 ms after the Cutter motor is activated.

• If excessive current is detected 0.3 seconds consecutively after the Master removal motor is activated.

• • If the light path of the Master tension plate sensor is not blocked within 384 pulse rotation of the Read pulse motor rotated in the reverse direction.
• • If master loading error is detected at Drum angle 79° and if the Master tension plate sensor is blocked.

E20

• • If excessive current is detected 0.3 seconds consecutively after the Inking motor is activated.

Paper Ejection Motor Lock

• • If excessive current is detected 0.3 seconds consecutively after the Paper ejection motor is activated.

Press ALL RESET button.

• If the connector of the Counter is not connected.

• If Memory switch No.200 is selected to 9~F.

• If the Master sensor does not detect the master (light not reflected)

during the master loading when the Drum is at 79° from the position-A.

• • If the Master positioning sensor does not detect the master (light not reflected) within 944 pulses after the Write pulse motor activates.
• • If the light path of the Master tension plate sensor is blocked ( Master tension plate is down) when the master feeding has started.

• • If the Master positioning sensor is still detecting the master (light reflected back) when the Drum is at position-A after the cutting operation and the Master tentioning plate sensor is ON.
• • If the Master sensor detects the master on the Drum again just after ‘C23’ error is cleared, ‘C23’ will be displayed again. Note: ‘C23’ will be displayed without pressing ‘     ‘ key.

• If the Master removal sensor does not detect the removed master (light path opened) when the Drum rotates to either 70° or 90° from the position-A during the master removal, when a master was detected on the Drum.

• If the Master removal sensor is detecting the removed master (light path blocked) even though the Drum has returned to the position-A after the master removal process.

• Remove the jammed master.

• If the Master sensor does not find master on the Drum when the Drum is at 79° during the printing movement.

• If the Paper receiving sensor does not find paper when the Drum is at Position-A during the printing operation and the Paper sensor finds a paper at next Drum Position-A.

• Remove the jammed paper.

• If the status of the Paper receiving sensor does not change from detecting paper to not detecting from one Drum Position-A to the next during printing.

• Remove the jammed paper.

• If the Paper sensor does not detect paper at Drum angle 135° within three Drum rotations during printing.

• If the Paper receiving sensor does not detect paper at one Drum Position-A and the Paper sensor detects paper at next Drum Position-A.

ALL RESET button.

• • During the Original set movement, if the Original IN sensor does not detect Original (sensor light not reflected) within 1712 pulses after the Read pulse motor activates.
• • During the Original set movement, if the Original IN sensor stops detecting the Original before the Read pulse motor activates 347 pulses.

• During the Original scanning, if the Original IN sensor keeps detecting Original (sensor light reflected) and does not stop detecting within 4945 pulses after the Read pulse motor activates.

• • If the Ink sensor does not detect ink in the Squeegee unit within 20 seconds after the Inking motor was activated.
• • If the Ink sensor does not detect ink in the Squeegee unit within 80  seconds after the Drum idling has started.

• • If the black tape attached at the end of the Master roll has been detected by the Master end sensor during master making or confidential operation.

Empty Disposal Box

• • If the Master full detection sensor does not detect the Master compress plate during the master compressing process.

• Replace the depleted Master roll with a new one.

Master removal set switch OFF &

5  seconds later ON.

• Empty the disposal box.

• If the light path of the Paper detection sensor is open.

• Add paper on the Paper feed tray.

• If the actuator of the Master disposal unit set switch is not depressed.

• If an operator card is not set in the Key/Card counter.

• If the Drum set sensor does not detect the Drum.

• • If the Ink Cartridge set switches do not detect the Ink Cartridge.
• • If deferent type of Ink Cartridge is inserted in the Drum.

( See page  8-3)

• If the ADF unit set sensor does not detect the ADF unit.

• If the actuator of the Master making unit set switch is not depressed.

• If Memory switch No.200 is selected to wrong machine model or wrong model Drum is set in the machine.

No.200 to correct machine model setting.