لمینت MKP
1402-06-04
Menu
CHAPTER 17: PANEL MESSAGES
Contents
EXPLANATION OF PANEL MESSAGES
Overview of messages
1) Error-code displays
Example: T99-123 T99: Error type
123: Error point
2) Error type
ریسوگراف RP 3105 order of error priority is as specified below.
|
Error type |
Error details | |
|
T |
Serviceman-call error | |
|
A |
Jam error | |
|
B |
Option error | |
|
C |
Consumable error | |
|
D |
Set check error | |
|
E |
Warning (Serviceman call) | |
|
F |
Warning (Oریسوگراف RP 3105r) | |
|
G |
Paper-jam error |
3) Error point
ریسوگراف RP 3105 error-point classifications are as specified below. If ریسوگراف RP 3105 power was turned off, during an error that would be backed up had been displayed, “999” will be displayed as an error point when ریسوگراف RP 3105 machine is turned on.
|
Error point |
Error details |
|
0XX |
System (hardware, software, communication), panel |
|
1XX |
Scanning section (scanner, ADF), image processing |
|
2XX |
Master making section |
|
3XX |
Master-disposal section |
|
4XX |
Paper-feed/ejection section |
|
5XX |
Print-drum area |
|
6XX |
Printing adjustment section (vertical, horizontal, density) |
|
7XX |
Accessories 1 |
|
8XX |
Accessories 2 |
| Error type |
details |
|
A01 |
Master feed error |
|
A02 |
Master loading error |
|
A03 |
Cutting error |
|
A04 |
Master-disposal error |
|
A05 |
Master present in ریسوگراف RP 3105 master-disposal section |
|
A06 |
Check paper-feed tray |
|
A07 |
Paper-feed error |
|
A08 |
Paper jam on print drum |
|
A09 |
Paper-ejection error |
|
A10 |
ADF original feed error |
|
A16 |
Awaiting master removal |
|
A17 |
Cutter error |
|
A18 |
Print-drum unlocked |
LIST OF PANEL MESSAGES
| Error type |
details |
|
T01 |
Main motor lock |
|
T02 |
Elevator motor lock |
|
T03 |
Clamp motor lock |
|
T04 |
Overflow |
|
T05 |
Print-positioning pulse-motor lock |
|
T06 |
Horizontal pulse-motor lock |
|
T07 |
Digitizer error |
|
T08 |
Computer interface error |
|
T09 |
Option error (paper eject) |
|
T10 |
Option error (paper feed) |
|
T11 |
Pressure-control motor |
|
T12 |
Master-disposal-section motor lock |
|
T13 |
Cutter motor lock |
|
T14 |
Flatbed error |
|
T15 |
ADF error |
|
T17 |
Solenoid counter not connected |
|
T19 |
ریسوگراف RP 3105rmal-pressure motor lock |
|
T20 |
Paper-ejection-section motor lock |
|
T21 |
Drum-lock error |
|
T22 |
Scanner lock not released |
|
T23 |
Inking motor lock |
|
T24 |
No battery |
|
T25 |
MCTL PCB backup error |
|
T96 |
Drum H/W error |
|
T98 |
Hardware error |
2. List of Panel Messages
| Error type |
details |
|
B01 |
Keycard counter: No card |
|
B02 |
Sorter: Error command 1 |
|
B03 |
Sorter: Error command 2 |
|
B04 |
Sorter: Error command 3 |
|
B05 |
Sorter: Error command 4 |
|
B06 |
Multi-tray: Main-unit error |
|
B07 |
Multi-tray: Main-unit error |
|
B08 |
Multi-tray: Main-unit error |
|
B09 |
Multi-tray: Main-unit error |
|
B10 |
Multi-tray: Tray-1 error |
|
B11 |
Multi-tray: Tray-1 error |
|
B12 |
Multi-tray: Tray-1 error |
|
B13 |
Multi-tray: Tray-1 error |
|
B14 |
Multi-tray: Tray-1 error |
|
B16 |
Multi-tray: Tray-2 error |
|
B17 |
Multi-tray: Tray-2 error |
|
B18 |
Multi-tray: Tray-2 error |
|
B19 |
Multi-tray: Tray-2 error |
|
B20 |
Multi-tray: Tray-2 error |
|
B21 |
Data storage: Read/write error |
|
B22 |
Job separator: Power off |
|
B23 |
Job separator: No tape |
|
B24 |
Job separator: Tape jam |
|
B25 |
Sorter: Error command 5 |
|
B26 |
Sorter: Error command 6 |
|
B27 |
Sorter: Error command 7 |
|
B28 |
Sorter: Error command 8 |
| Error type |
details |
|
D01 |
Print drum not set |
|
D02 |
Incorrect print drum |
|
D03 |
Ink cartridge not set |
|
D04 |
Incorrect ink cartridge |
|
D05 |
Master not set |
|
D07 |
Master-disposal box not set |
|
D08 |
Master-disposal unit not set |
|
D09 |
Master making unit not set |
|
D10 |
Scanner table not set |
|
D11 |
Front cover not set |
|
D12 |
Feed-joint pass. Cover not set. |
| Error type |
details |
|
C01 |
Replace ink cartridge |
|
C02 |
Replace master roll |
|
C03 |
Master-disposal box full |
| Error type |
details |
|
E01 |
Replace battery |
|
E02 |
Maintenance call |
LIST OF PANEL MESSAGES
LIST OF PANEL MESSAGES
| Error type |
details |
|
F01 |
No master on drum |
|
F02 |
Master image larger than paper size |
|
F04 |
Original not set |
|
F05 |
Print quantity under “minimum print quantity” |
|
F07 |
Drum position error |
|
F08 |
Paper size / Original size: Mismatch |
|
F10 |
Master image larger than paper size: 2 |
|
F11 |
Master image larger than paper size: 3 |
|
F12 |
Original size irregular: Triple-Tray Source |
|
F14 |
No paper |
|
F16 |
ADF cannot be used for QT-4 |
|
F17 |
Change in drum size |
|
F18 |
Incorrect zoom rate |
|
F19 |
Master image larger than paper size: 4 |
|
F20 |
Master image larger than paper size: 5 |
|
F21 |
ADF multi-up: Original not set |
|
F22 |
FB multi-up: Original not set |
|
F23 |
Communication error: D to P |
|
F24 |
Auto-reproduction size selection: Unable |
|
F25 |
Incorrect image resolution |
|
F26 |
Incorrect paper size: Long-paper mode |
|
F30 |
Multiple paper feed |
|
F31 |
Auto-stack tray error |
|
F32 |
Data storage area full |
|
F33 |
Master image size / Drum size: Mismatch |
|
F37 |
ADF cannot be used in book mode |
|
F40 |
No paper in paper-feed tray: Triple-Tray
Source |
|
F41 |
No paper in tray 1: Triple-Tray Source |
|
F42 |
No paper in tray 2: Triple-Tray Source |
LIST OF PANEL MESSAGES
Paper-jam error
ریسوگراف RP 3105 paper-jam error number is determined by combining ریسوگراف RP 3105 errors for ریسوگراف RP 3105 paper jams involved. ریسوگراف RP 3105re are nine different jam errors, as specified in ریسوگراف RP 3105 table below. Each error is assigned a bit, and ریسوگراف RP 3105 jamerror number (Gxxx) is ریسوگراف RP 3105 sum of ریسوگراف RP 3105 corresponding values. ریسوگراف RP 3105 detailed error codes can be displayed by pressing ریسوگراف RP 3105 “*” key.
|
Error type |
Corresponding value |
Error No. |
Error |
|
Bit 0 |
1 |
A10 |
ADF original feed error |
|
Bit 1 |
2 |
B03 |
Sorter: Error command 2 |
|
Bit 2 |
4 |
B07 |
Multi-tray: Main-unit error |
|
Bit 3 |
8 |
B09 |
Multi-tray: Main-unit error |
|
Bit 4 |
16 |
B11 |
Multi-tray: Tray-1 error |
|
Bit 5 |
32 |
B17 |
Multi-tray: Tray-2 error |
|
Bit 6 |
64 |
A07 |
Paper-feed error |
|
Bit 7 |
128 |
A08 |
Paper jam on print drum |
|
Bit 8 |
256 |
A09 |
Paper-ejection error |
Example:
If A08 and B03 occur, ریسوگراف RP 3105 Error No. will be G130.
Serviceman-call errors
|
Error type |
T01 [Main-motor lock] | |||||
|
Panel display |
T01-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Jam reset | |||||
|
Error point |
Error conditions |
|||||
|
520 |
ریسوگراف RP 3105 main motor limit sensor does not go ON/OFF for more than 16 pulses while ریسوگراف RP 3105 main motor is operating, even after ریسوگراف RP 3105 elapse of 100 ms. | |||||
|
521 |
ریسوگراف RP 3105 position-A sensor does not go ON/OFF, between two detections of position-B, while ریسوگراف RP 3105 main motor is operating. | |||||
|
522 |
ریسوگراف RP 3105 position-B sensor does not go ON/OFF while ریسوگراف RP 3105 motor is operating, even when 3033 pulses are received at ریسوگراف RP 3105 Main FG. | |||||
|
523 |
Main-motor overload current | |||||
|
524 |
ریسوگراف RP 3105 clamp unit is not at ریسوگراف RP 3105 home position while ریسوگراف RP 3105 print drum is operating (Clamp sensor C: OFF, except during master disposal). | |||||
|
536 |
ریسوگراف RP 3105 drum failed to stop at position A. (over-run) | |||||
|
537 |
ریسوگراف RP 3105 drum failed to stop at position B. (over-run) | |||||
|
538 |
ریسوگراف RP 3105 print drum is not locked during operation. (Print-drum lock position sensor: OFF ) | |||||
|
Error type |
T02 [Elevator motor lock] | |||||
|
Panel display |
T02-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Jam reset or switch on power again | |||||
|
Error point |
Error conditions |
|||||
|
400 |
Both ریسوگراف RP 3105 upper and lower limit sensors were ON. | |||||
|
401 |
An overload current was detected in ریسوگراف RP 3105 elevator motor. | |||||
|
404 |
ریسوگراف RP 3105 lower-limit sensor does not go OFF within 2 s after ریسوگراف RP 3105 elevator motor operates in ریسوگراف RP 3105 raising direction from ریسوگراف RP 3105 lower-limit position. | |||||
|
405 |
ریسوگراف RP 3105 upper-limit sensor does not go ON within 12 s after ریسوگراف RP 3105 elevator motor operates in ریسوگراف RP 3105 raising direction. | |||||
|
406 |
ریسوگراف RP 3105 upper-limit sensor does not go OFF within 2 s after ریسوگراف RP 3105 elevator motor operates in ریسوگراف RP 3105 lower direction from ریسوگراف RP 3105 upper-limit position. | |||||
|
407 |
ریسوگراف RP 3105 lower-limit sensor does not go ON within 12 s after ریسوگراف RP 3105 elevator motor operates in ریسوگراف RP 3105 lowering direction. | |||||
|
408 |
ریسوگراف RP 3105 upper-limit sensor is OFF continuously for at least 2 s during operation of ریسوگراف RP 3105 elevator servo. | |||||
|
Error type |
T03 [Clamp motor] | |||||
| T03-*** | ||||||
|
Panel display |
!! System Error !!
Press Reset Key If Recovery has Failed, Call Service |
|||||
|
Reset method |
Jam reset or switch on power again | |||||
|
Error point |
Error conditions |
|||||
|
500 |
Clamp sensor C turns OFF following clamp unit initialization. | |||||
|
501 |
Clamp sensors A and B do not change within 800 ms when ریسوگراف RP 3105 clamp motor operates in reverse during clamp unit initialization (clamp sensor A starts at OFF). | |||||
|
502 |
Clamp sensors A and B do not change within 800 ms when ریسوگراف RP 3105 clamp motor operates in ریسوگراف RP 3105 forward direction during clamp unit initialization (clamp sensor A starts at ON). | |||||
|
503 |
Clamp sensor C does not go OFF within 800 ms when ریسوگراف RP 3105 clamp moves from ریسوگراف RP 3105 home position. | |||||
|
504 |
ریسوگراف RP 3105 clamp does not move from ریسوگراف RP 3105 home position to ریسوگراف RP 3105 open position within 800 ms during ریسوگراف RP 3105 operation of ریسوگراف RP 3105 clamp. | |||||
|
505 |
ریسوگراف RP 3105 clamp does not move from ریسوگراف RP 3105 open position to ریسوگراف RP 3105 position-A compensation position within 800 ms during ریسوگراف RP 3105 operation of ریسوگراف RP 3105 clamp. | |||||
|
506 |
ریسوگراف RP 3105 clamp does not move from ریسوگراف RP 3105 position-A compensation position to ریسوگراف RP 3105 clamp close position within 800 ms during ریسوگراف RP 3105 clamp operation. | |||||
|
507 |
ریسوگراف RP 3105 command does not coincide with ریسوگراف RP 3105 current position when clamp operation is started. | |||||
|
508 |
ریسوگراف RP 3105 command does not coincide with ریسوگراف RP 3105 stop position when clamp operation is stopped. | |||||
|
Error type |
T-04 [Overflow] | |||||
| T04-*** | ||||||
|
Panel display |
!! System Error !!
Press Reset Key If Recovery has Failed, Call Service |
|||||
|
Reset method |
Jam reset or switch on power again | |||||
|
Error point |
Error conditions |
|||||
|
513 |
ریسوگراف RP 3105 overflow sensor was ON for a set number of times in succession during ریسوگراف RP 3105 10ms-interval overflow-sensor check. | |||||
|
Error type |
T05 [Vertical-positioning pulse- motor lock ] | |||||
|
Panel display |
T05-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Jam reset or switch on power again | |||||
|
Error point |
Error conditions |
|||||
|
603 |
ریسوگراف RP 3105 vertical-centering sensor does not switch OFF -> ON even when ریسوگراف RP 3105 vertical-positioning pulse motor is moved 12 mm in ریسوگراف RP 3105 ON direction. | |||||
|
604 |
ریسوگراف RP 3105 vertical-centering sensor does not switch ON -> OFF even when ریسوگراف RP 3105 vertical-positioning pulse motor is moved 12 mm in ریسوگراف RP 3105 OFF direction. | |||||
|
610 |
Timeout error during ریسوگراف RP 3105 vertical-print-position return operation | |||||
|
614 |
Vertical-print-position returning time out error | |||||
|
616 |
ریسوگراف RP 3105 one-step-positioning key was pressed with vertical-print-position information undefined. | |||||
|
Error type |
T06 [Horizontal-positioning pulse-motor lock] | |||||
|
Panel display |
T06-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Jam reset or switch on power again | |||||
|
Error point |
Error conditions |
|||||
|
605 |
ریسوگراف RP 3105 horizontal-centering sensor does not switch OFF -> ON even when ریسوگراف RP 3105 horizontal pulse motor is moved 12 mm in ریسوگراف RP 3105 ON direction. | |||||
|
606 |
ریسوگراف RP 3105 horizontal-centering sensor does not switch ON -> OFF even when ریسوگراف RP 3105 horizontal pulse motor is moved 12 mm in ریسوگراف RP 3105 OFF direction. | |||||
|
611 |
Timeout error during horizontal-print-position return operation | |||||
|
615 |
Horizontal-print-position returning time out error | |||||
|
617 |
ریسوگراف RP 3105 one-step-positioning key was pressed with ریسوگراف RP 3105 horizontal-print-position information undefined. | |||||
|
Error type |
T07 [Digitizer error] | |||||
|
Panel display |
T07-*** | |||||
| !!System Error!! | ||||||
| Turn Main-Power SW OFF ریسوگراف RP 3105n ON | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
001 |
Communication error with ریسوگراف RP 3105 digitizer CPU | |||||
|
Error type |
T08 [Computer interface error] | |||||
| T08-*** | ||||||
|
Panel display |
!! System Error !!
Turn Main-Power SW OFF ریسوگراف RP 3105n ON If Recovery has Failed, Call Service |
|||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
002 |
Communication error with ریسوگراف RP 3105 computer interface | |||||
|
Error type |
T09 [Option error (paper eject)] | |||||
| T09-*** | ||||||
|
Panel display |
!! System Error !!
Turn Main-Power SW OFF ریسوگراف RP 3105n ON If Recovery has Failed, Call Service |
|||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
003 |
Communication error with ریسوگراف RP 3105 sorter | |||||
|
700 |
Sorter communication: CTS does not switch to L within 3000 ms after ریسوگراف RP 3105 power is switched ON. | |||||
|
701 |
Sorter communication: ریسوگراف RP 3105 type status was not returned within 200 ms after ریسوگراف RP 3105 initialization command was sent. | |||||
|
710 |
Sorter communication: Transmission timeout | |||||
|
711 |
Sorter communication: CTS does not change. | |||||
|
712 |
Sorter communication: ریسوگراف RP 3105 retry command was sent but not received. | |||||
|
720 |
Sorter communication: ریسوگراف RP 3105 retry command was received two times in successtion. | |||||
|
Error type |
T10 [Option error (paper feed)] | |||||
| T10-*** | ||||||
|
Panel display |
!! System Error !!
Turn Main-Power SW OFF ریسوگراف RP 3105n ON If Recovery has Failed, Call Service |
|||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
800 |
ریسوگراف RP 3105 multi-tray unit is connected, but ریسوگراف RP 3105 power is OFF. | |||||
|
801 |
ریسوگراف RP 3105 type status was not returned from ریسوگراف RP 3105 multi-tray unit when ریسوگراف RP 3105 power was switched ON. | |||||
|
802 |
ریسوگراف RP 3105 Standby OK command was not returned when printing started. | |||||
|
803 |
ریسوگراف RP 3105 status was not returned from ریسوگراف RP 3105 multi-tray unit. | |||||
|
840 |
An undefined multi-tray-unit command was received. | |||||
|
841 |
CAN controller initialization failed. | |||||
|
Error type |
T11 [Pressure-control motor lock] | |||||
|
Panel display |
T11-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Jam reset or switch on power again | |||||
|
Error point |
Error conditions |
|||||
|
600 |
Timeout error for reducing pressure (OFF -> ON) during print-pressure home positioning | |||||
|
601 |
Timeout error for increasing pressure (ON -> OFF) during print-pressure home positioning | |||||
|
602 |
ریسوگراف RP 3105 print-pressure limit sensor does not change during print-pressure operation. | |||||
|
620 |
Print-pressure operation was called with ریسوگراف RP 3105 print-pressure motor locked. | |||||
|
621 |
Incorrect print-pressure operation timing (print-pressure operation command was received when ریسوگراف RP 3105 print-pressure should not change.) | |||||
|
622 |
Sensor A is ON and sensor B is OFF during movement from area A to area D. | |||||
|
623 |
Eiریسوگراف RP 3105r sensor A or sensor B is ON during movement from area D to area A. | |||||
|
624 |
ریسوگراف RP 3105 current area data is undefined. | |||||
|
625 |
ریسوگراف RP 3105 target area data is undefined. | |||||
|
626 |
Timeout during relative print-pressure movement | |||||
|
Error type |
T12 [Master-disposal-section motor lock] | |||||
|
Panel display |
T12-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Jam reset or switch on power again | |||||
|
Error point |
Error conditions |
|||||
|
300 |
Master-disposal-motor overload-current detection is ON. | |||||
|
305 |
ریسوگراف RP 3105 master compression sensor does not go ON within 6.5 s after ریسوگراف RP 3105 master compression motor operates in ریسوگراف RP 3105 return direction. | |||||
|
306 |
Master compression sensor does not go OFF within 2 s after ریسوگراف RP 3105 master compression motor operates in ریسوگراف RP 3105 compress direction. | |||||
|
307 |
ریسوگراف RP 3105 master compression sensor does not go ON within 6.5 s after ریسوگراف RP 3105 master compression motor operates in ریسوگراف RP 3105 compress direction, and ریسوگراف RP 3105 master-compression-motor limit sensor cannot count up until ریسوگراف RP 3105 compression-limit position. | |||||
|
309 |
ریسوگراف RP 3105 master-compression-motor limit sensor does not change within 200 ms during compression operation. | |||||
|
Error type |
T13 [Cutter motor lock] | |||||
|
Panel display |
T13-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Jam reset or switch on power again | |||||
|
Error point |
Error conditions |
|||||
|
203 |
Cutter HP SW does not go OFF within 100 ms after ریسوگراف RP 3105 cutter motor is activated. | |||||
|
204 |
Cutter HP SW does not go OFF -> ON within 300 ms after ریسوگراف RP 3105 cutter motor is activated. | |||||
|
205 |
ریسوگراف RP 3105 master-positioning sensor is ON when ریسوگراف RP 3105 print drum rotates through ریسوگراف RP 3105 preset angle following cutting, and ریسوگراف RP 3105 master-positioning sensor is still ON when ریسوگراف RP 3105 print drum rotates through ریسوگراف RP 3105 preset angle following repeat cutting. | |||||
|
Error type |
T14 [Flatbed error] | |||||
|
Panel display |
T14-*** | |||||
| !!System Error!! | ||||||
| Turn Main-Power SW OFF ریسوگراف RP 3105n ON | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
112 |
ریسوگراف RP 3105 FB/ADF HP sensor does not go OFF within ریسوگراف RP 3105 set time. | |||||
|
113 |
ریسوگراف RP 3105 FB/ADF HP sensor does not go ON within ریسوگراف RP 3105 set time. | |||||
|
114 |
Incorrect main-unit setting data | |||||
|
115 |
ریسوگراف RP 3105 scanner operation is not completed within ریسوگراف RP 3105 set time. | |||||
|
116 |
Timeout error for waiting black shading compensation | |||||
|
117 |
Timeout error for waiting white shading compensation | |||||
|
118 |
Scanner operation command was received when it should not move. (400/300 DPI) | |||||
|
140 |
Communication error from ریسوگراف RP 3105 scanner unit (NAK twice, undefined error, etc.) | |||||
|
141 |
Communication timeout error from ریسوگراف RP 3105 scanner unit (Receive timeout) | |||||
|
142 |
ریسوگراف RP 3105 scanner unit detects a sequence error from ریسوگراف RP 3105 Risograph. | |||||
|
150 |
Timeout error for receiving ریسوگراف RP 3105 Risograph scanner command | |||||
|
151 |
ریسوگراف RP 3105 Risograph received an undefined command from ریسوگراف RP 3105 scanner. | |||||
|
152 |
ریسوگراف RP 3105 Risograph detected a communication sequence error from ریسوگراف RP 3105 scanner. | |||||
|
153 |
Risograph scanner communication error (ACK, NAK, or received-channel error) | |||||
|
154 |
ریسوگراف RP 3105 Risograph could not send data to ریسوگراف RP 3105 scanner within ریسوگراف RP 3105 set time. | |||||
|
160 |
Scanner connection error | |||||
|
Error type |
T15 [ADF error] | |||||
|
Panel display |
T15-*** | |||||
| !!System Error!! | ||||||
| Turn Main-Power SW OFF ریسوگراف RP 3105n ON | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
004 |
Communication error with ریسوگراف RP 3105 ADF/CPU units | |||||
|
100 |
Original IN sensor adjustment error | |||||
|
101 |
ADF-EEPROM error | |||||
|
108 |
ADF guide potentiometer error | |||||
|
110 |
ADF operation not completed within ریسوگراف RP 3105 set time | |||||
|
120 |
Communication error from ریسوگراف RP 3105 ADF unit (NAK twice, undefined error, etc.) | |||||
|
121 |
Communication timeout error from ریسوگراف RP 3105 ADF unit (Receive timeout) | |||||
|
122 |
ریسوگراف RP 3105 ADF unit detects a sequence error from ریسوگراف RP 3105 Risograph. | |||||
|
130 |
Timeout error for receiving ریسوگراف RP 3105 Risograph ADF command | |||||
|
131 |
ریسوگراف RP 3105 Risograph received an undefined command from ریسوگراف RP 3105 ADF unit. | |||||
|
132 |
ریسوگراف RP 3105 Risograph detected a communication sequence error from ریسوگراف RP 3105 ADF unit. | |||||
|
133 |
Risograph ADF communication error (ACK, NAK, or received-channel error) | |||||
|
134 |
ریسوگراف RP 3105 Risograph could not send to ریسوگراف RP 3105 ADF within ریسوگراف RP 3105 set time. | |||||
|
161 |
ADF connection error | |||||
|
Error type |
T17 [Solenoid counter not connected] | |||||
|
Panel display |
T17-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Set ریسوگراف RP 3105 solenoid counter connection signal to ON | |||||
|
Error point |
Error conditions |
|||||
|
020 |
ریسوگراف RP 3105 solenoid counter is not connected. | |||||
|
Error type |
T19 [ریسوگراف RP 3105rmal-pressure motor lock] | |||||
|
Panel display |
T19-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Jam reset or switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
207 |
ریسوگراف RP 3105 TPH pressure sensor does not go OFF within 2 s after ریسوگراف RP 3105 ریسوگراف RP 3105rmal-pressure motor activates in ریسوگراف RP 3105 counterclockwise direction. | |||||
|
208 |
ریسوگراف RP 3105 TPH pressure sensor does not go ON within 2 s after ریسوگراف RP 3105 ریسوگراف RP 3105rmal-pressure motor activates in ریسوگراف RP 3105 counterclockwise direction. | |||||
|
216 |
ریسوگراف RP 3105 TPH pressure sensor does not go OFF within 2 s after ریسوگراف RP 3105 ریسوگراف RP 3105rmal-pressure motor activates in ریسوگراف RP 3105 clockwise direction. | |||||
|
217 |
ریسوگراف RP 3105 TPH pressure sensor does not go ON within 2 s after ریسوگراف RP 3105 ریسوگراف RP 3105rmal-pressure motor activates in ریسوگراف RP 3105 clockwise direction. | |||||
|
Error type |
T20 [ریسوگراف RP 3105rmal-pressure motor lock] | |||||
|
Panel display |
T20-*** | |||||
| !!System Error!! | ||||||
| Press Reset Key | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Jam reset | |||||
|
Error point |
Error conditions |
|||||
|
414 |
ریسوگراف RP 3105 paper-ejection-wing home sensor does not go ON within ریسوگراف RP 3105 set time after ریسوگراف RP 3105 paperejection-wing motor activates in ریسوگراف RP 3105 clockwise direction during paper-ejection wing home positioning. | |||||
|
415 |
ریسوگراف RP 3105 paper-ejection-wing home sensor does not go OFF within 250 ms after ریسوگراف RP 3105 paper ejection wing motor activates in ریسوگراف RP 3105 counterclockwise direction from home position during paper ejection wing positioning. | |||||
|
416 |
An overload current was detected in ریسوگراف RP 3105 paper-ejection motor. | |||||
|
424 |
ریسوگراف RP 3105 paper-ejection limit sensor gives fewer than 20 pulses within 100 ms. | |||||
|
Error type |
T22 [Drum lock error] | |||||
| T22-*** | ||||||
|
Panel display |
!! System Error !!
Press Reset Key If Recovery has Failed, Call Service |
|||||
|
Reset method |
Jam reset or switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
514 |
Failed to stop at position B during print-drum locking | |||||
|
515 |
Failed to stop at position B during print-drum locking when switching ON | |||||
|
516 |
ریسوگراف RP 3105 print-drum lock position sensor does not go OFF within 500 ms after ریسوگراف RP 3105 printdrum locking motor activates. | |||||
|
517 |
ریسوگراف RP 3105 print-drum lock cam sensor does not go ON within 1 s after ریسوگراف RP 3105 print-drum locking motor activates. | |||||
|
518 |
ریسوگراف RP 3105 print-drum lock position sensor does not go ON within 500 ms after ریسوگراف RP 3105 print-drum locking motor activates. | |||||
|
519 |
ریسوگراف RP 3105 print-drum lock cam sensor does not go OFF within 1 s after ریسوگراف RP 3105 print-drum locking motor activates. | |||||
|
529 |
ریسوگراف RP 3105 print-drum lock-position sensor and print-drum lock cam sensor are both ON. | |||||
|
530 |
ریسوگراف RP 3105 print-drum lock cam sensor does not go ON within 2 s after ریسوگراف RP 3105 print-drum locking motor activates during drum lock initialization. | |||||
|
531 |
ریسوگراف RP 3105 print-drum lock position sensor does not go ON within 2 s after ریسوگراف RP 3105 print-drum locking motor activates during drum lock initialization. | |||||
|
549 |
ریسوگراف RP 3105 print-drum lock-position sensor does not go ON during locking of ریسوگراف RP 3105 print-drum lock unit. | |||||
|
550 |
ریسوگراف RP 3105 print-drum lock-position sensor is OFF while ریسوگراف RP 3105 print drum is not set. | |||||
|
Error type |
T23 [Scanner lock not released] | |||||
| T23-*** | ||||||
|
Panel display |
ریسوگراف RP 3105 Image Scanner is Locked!! Unlock it | |||||
|
Reset method |
Release ریسوگراف RP 3105 scanner lock in test mode | |||||
|
Error point |
Error conditions |
|||||
|
111 |
In scanner lock mode | |||||
|
Error type |
T24 [Inking motor lock] | |||||
| T24-*** | ||||||
|
Panel display |
Press Reset Key
If Recovery has Failed, Call Service |
|||||
|
Reset method |
Jam reset or switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
539 |
Inking-motor current overload | |||||
|
Error type |
T25 [No battery] | |||||
| T25-*** | ||||||
|
Panel display |
!! System Error !!
Turn Main-Power SW OFF ریسوگراف RP 3105n ON If Recovery has Failed, Call Service |
|||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
026 |
ریسوگراف RP 3105 residual battery voltage is below 2.3 V when ریسوگراف RP 3105 power is ON. | |||||
|
Error type |
T95 [MCTL PCB backup error] | |||||
| T95-*** | ||||||
|
Panel display |
!! System Error !!
Turn Main-Power SW OFF ریسوگراف RP 3105n ON If Recovery has Failed, Call Service |
|||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
056 |
NVRAM check-sum error in ریسوگراف RP 3105 MCTL PCB | |||||
|
059 |
Serial-number data sent from SH-PCB does not match ریسوگراف RP 3105 MCTL PCB serial-number data. | |||||
|
Error type |
T96 [Drum H/W error] | |||||
| T96-*** | ||||||
|
Panel display |
!! System Error !!
Remove and Replace Print Drum If Recovery has Failed, Call Service |
|||||
|
Reset method |
Pull out ریسوگراف RP 3105 print drum or switch ریسوگراف RP 3105 power on again | |||||
|
Error point |
Error conditions |
|||||
|
552 |
Print-drum data backup error | |||||
|
Error type |
T98 [Hardware error] | |||||
| T98-*** | ||||||
|
Panel display |
!! System Error !!
Turn Main-Power SW OFF ریسوگراف RP 3105n ON If Recovery has Failed, Call Service |
|||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
005 |
Type-code error | |||||
|
029 |
Straight paper feed (multi-tray unit) is not set. | |||||
|
030 |
Tray 1 (multi-tray unit) is not set. | |||||
|
031 |
Tray 2 (multi-tray unit) is not set. | |||||
|
036 |
SH-PCB-to-MCTL-PCB communication error | |||||
|
046 |
ریسوگراف RP 3105 DIMM capacity does not match. | |||||
|
051 |
Touch-panel communication error | |||||
|
052 |
EEPROM read error | |||||
|
053 |
Memory settings (program, mode, user paper), failed to read ریسوگراف RP 3105 save data | |||||
|
054 |
Memory settings (program, mode, user paper), failed to write save data | |||||
|
055 |
ریسوگراف RP 3105 type code from SH-PCB does not match ریسوگراف RP 3105 type data from ریسوگراف RP 3105 MCTL PCB. | |||||
|
056 |
NVRAM check-sum error in ریسوگراف RP 3105 MCTL PCB | |||||
|
057 |
SRAM backup error in ریسوگراف RP 3105 SH-PCB | |||||
|
058 |
All SH-PCB serial-number data is zero. | |||||
|
063 |
ریسوگراف RP 3105 test-mode setting data stored was set outside ریسوگراف RP 3105 adjustment range. | |||||
|
064 |
An undefined command was sent in communication between SH-PCB and MCTL PCB. | |||||
|
065 |
Communication error 01 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
066 |
Communication error 02 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
067 |
Communication error 03 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
068 |
Communication error 04 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
069 |
Communication error 05 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
070 |
Communication error 06 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
071 |
Communication error 07 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
072 |
Communication error 08 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
073 |
Communication error 09 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
074 |
Communication error 10 between SH-PCB and MCTL PCB (MCTL PCB side) | |||||
|
075 |
Communication error 11 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
Error type |
T98 [Hardware error] | |||||
|
Panel display |
T98-*** | |||||
| !!System Error!! | ||||||
| Turn Main-Power SW OFF ریسوگراف RP 3105n ON | ||||||
| If Recovery has Failed, Call Service | ||||||
|
Reset method |
Switch power on again | |||||
|
Error point |
Error conditions |
|||||
|
076 |
Communication error 12 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
077 |
Communication error 13 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
078 |
Communication error 14 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
079 |
Communication error 15 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
080 |
Communication error 16 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
081 |
Communication error 17 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
082 |
Communication error 18 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
083 |
Communication error 19 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
084 |
Communication error 20 between SH-PCB and MCTL PCB (SH-PCB side) | |||||
|
085 |
User settings (properties, test-mode adjustment values), failed to read save data | |||||
|
086 |
User settings (properties, test-mode adjustment values), failed to write save data | |||||
|
087 |
Memory settings (program, mode, user paper), no save data set | |||||
|
088 |
User settings (properties, test-mode adjustment values), no save data set | |||||
|
089 |
Dip-SW (No.1) of SH-PCB is ON. | |||||
|
090 |
Machine code of memory settings (program, mode, user paper) does not match. | |||||
|
091 |
Check sum of memory settings (program, mode, user paper), does not match. | |||||
|
092 |
Machine code of User settings (properties, test-mode adjustment values), does not match. | |||||
|
093 |
Check sum of user settings (properties, test-mode adjustment values), does not match. | |||||
|
094 |
Communication sequence error between SH-PCB and MCTL PCB (MCTL side) | |||||
|
095 |
Check sum of user settings (properties, test-mode adjustment values), does not match during stand-by. | |||||
|
096 |
Check sum of memory settings (program, mode, user paper), does not match, during standby. | |||||
|
097 |
Test mode adjustments memorized in ریسوگراف RP 3105 drum is outside ریسوگراف RP 3105 adjustment range. | |||||
|
219 |
ریسوگراف RP 3105 TPH size code does not match ریسوگراف RP 3105 type-code data. | |||||
|
220 |
ریسوگراف RP 3105 TPH resolution code does not match ریسوگراف RP 3105 type-code data. | |||||
|
422 |
ریسوگراف RP 3105 transmitter adjustment DA setting reached ریسوگراف RP 3105 upper limit during text-mode No. 457 Auto Multi-Paper-Feed Det. Adj. | |||||
|
423 |
ریسوگراف RP 3105 transmitter adjustment DA setting reached ریسوگراف RP 3105 lower limit during text-mode No. 457 Auto Multi-Paper-Feed Det. Adj. | |||||
|
540 |
Print-drum communication: Gate-layout timeout | |||||
|
541 |
Print-drum communication: ROM-writing-complete timeout | |||||
|
614 |
Print-pressure jig: Outside ریسوگراف RP 3105 adjustment range | |||||
Jam errors
|
Error type |
A01 [Master feed error] |
|
Panel display |
A01-*** |
| Master Misfeed | |
| Rewind Master Roll and Reset Master in Place | |
|
Reset method |
Master-making-unit sensor: OFF -> ON, ریسوگراف RP 3105n master-positioning sensor OFF (or switch ریسوگراف RP 3105 power on again) |
|
Error point |
Error conditions |
|
201 |
ریسوگراف RP 3105 master-positioning sensor does not go ON even when ریسوگراف RP 3105 master is fed ریسوگراف RP 3105 preset amount after ریسوگراف RP 3105 write pulse motor and load pulse motor are activated during ریسوگراف RP 3105 masterpositioning operation. |
|
202 |
ریسوگراف RP 3105 master-positioning sensor does not go OFF even when ریسوگراف RP 3105 write pulse motor is reversed during ریسوگراف RP 3105 master-positioning operation. |
|
211 |
ریسوگراف RP 3105 master-positioning sensor was ON during standby. |
|
214 |
ریسوگراف RP 3105 master-positioning sensor was ON at ریسوگراف RP 3105 start of master making. |
|
215 |
Faulty gate-array control for ریسوگراف RP 3105 write pulse motor or load pulse motor |
|
Error type |
A02 [Master loading error] |
|
Panel display |
A02-*** |
| Master Misfeed | |
| Rewind Master Roll and Reset Master in Place | |
|
Reset method |
Master-manufacturing unit sensor: OFF -> ON |
|
Error point |
Error conditions |
|
509 |
ریسوگراف RP 3105 master-loading sensor was OFF when ریسوگراف RP 3105 master was checked at a specified angle during ریسوگراف RP 3105 master-loading operation. |
|
Error type |
A03 [ Cutting error ] |
|
Panel display |
A03-*** |
| Master Not Loaded on Print Drum Correctly | |
| Pull Out Print Drum and Remove Master | |
|
Reset method |
Print-drum set sensor: OFF -> ON |
|
Error point |
Error conditions |
|
206 |
Cutting was performed after ریسوگراف RP 3105 cutting operation was repeated. |
|
Error type |
A04 [Master-disposal error] | |
|
Panel display |
A04-*** | |
| Master-Disposal Error | ||
| Pull Out Print Drum and Discard Master | ||
|
Reset method |
Print-drum set sensor: OFF -> ON | |
|
Error point |
Error conditions |
|
|
303 |
OFF/OFF in master-disposal jam sensor check at 120°/180° | |
|
304 |
ریسوگراف RP 3105 master-disposal jam sensor was ON upon completion of master-disposal operation. | |
|
Error type |
A05 [Master present in ریسوگراف RP 3105 master-disposal section] | |
|
Panel display |
A05-*** | |
| Master Jammed in Disposal Unit | ||
| Open Scanner Table and Disposal Top Cover, ریسوگراف RP 3105n Remove Master | ||
|
Reset method |
Master-disposal-unit set sensor: OFF C25-> ON, and master-disposal jam sensor: ON (Or switch ریسوگراف RP 3105 power on again.) | |
|
Error point |
Error conditions |
|
|
312 |
ریسوگراف RP 3105 master-disposal jam sensor was ON at ریسوگراف RP 3105 start of master making operation. | |
|
Error type |
A06 [Check paper-feed tray] | |
|
Panel display |
A06-*** | |
| Check Multipurpose Feed Tray | ||
|
Reset method |
ریسوگراف RP 3105 paper-feed-tray lower/upper safety switch goes ON. (Or switch ریسوگراف RP 3105 power on again.) | |
|
Error point |
Error conditions |
|
|
403 |
ریسوگراف RP 3105 paper-feed-tray upper or lower safety switch was OFF. | |
|
Error type |
A07 [ Paper-feed error ] | |
|
Panel display |
||
|
Reset method |
Turn ریسوگراف RP 3105 paper sensor OFF and reset ریسوگراف RP 3105 jam (or switch ریسوگراف RP 3105 power on again). | |
|
Error point |
Error conditions |
|
|
409 |
ریسوگراف RP 3105 paper-ejection sensor was OFF when ریسوگراف RP 3105 paper should have arrived, and ریسوگراف RP 3105 paper sensor was ON at 180°, just before stopping. | |
|
412 |
ریسوگراف RP 3105 paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed). | |
|
418 |
ریسوگراف RP 3105 paper sensor was ON at ریسوگراف RP 3105 start of operation. | |
|
Error type |
A08 [Paper jam on print drum] | |
|
Panel display |
||
|
Reset method |
Print-drum set sensor: OFF -> ON (Or switch ریسوگراف RP 3105 power on again.) | |
|
Error point |
Error conditions |
|
|
410 |
ریسوگراف RP 3105 paper-ejection sensor was OFF when paper should have arrived, and ریسوگراف RP 3105 paper sensor was OFF at 180° just before stopping. | |
|
421 |
ریسوگراف RP 3105 paper sensor was ON when ریسوگراف RP 3105 paper should have left ریسوگراف RP 3105 paper sensor during feeding of long paper in long-length paper mode (paper longer than 555 mm). | |
|
829 |
Error command (Main unit: Jam error) received from ریسوگراف RP 3105 multi-tray unit | |
| After paper-sensor turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 paper-sensor did not turn OFF. (Multi-tray feed sensor 1 to 3: OFF and 4: ON and paper sensor: ON) or (Multi-tray feed sensor 4: ON and paper sensor: ON at | ||
|
Error type |
A09 [ Paper-ejection error ] | |
|
Panel display |
||
|
Reset method |
Turn ریسوگراف RP 3105 paper-ejection sensor OFF and reset ریسوگراف RP 3105 jam, or switch ریسوگراف RP 3105 power on again. | |
|
Error point |
Error conditions |
|
|
411 |
ریسوگراف RP 3105 paper-ejection sensor was ON when ریسوگراف RP 3105 paper should have left ریسوگراف RP 3105 paper-ejection sensor. | |
|
417 |
ریسوگراف RP 3105 paper-ejection sensor was ON at ریسوگراف RP 3105 start of operation. | |
|
Error type |
A10 [ADF original feed error] | |
|
Panel display |
||
|
Reset method |
Turn ریسوگراف RP 3105 ADF original detection sensor OFF, and reset ریسوگراف RP 3105 jam. | |
|
Error point |
Error conditions |
|
|
102 |
Original-registration-sensor remaining jam | |
|
103 |
Original-IN-sensor remaining jam | |
|
104 |
Original-OUT-sensor remaining jam | |
|
105 |
Original-registration-sensor non-arrival jam | |
|
106 |
Original-IN-sensor non-arrival jam | |
|
107 |
Original-OUT-sensor non-arrival jam | |
|
109 |
An original feed error occurred, due to opening ریسوگراف RP 3105 ADF. | |
|
162 |
No original in ADF during ADF master making. | |
|
Error type |
A16 [Awaiting master removal] | |
| A16-*** | ||
|
Panel display |
Master Remains on Print Drum
Pull Out Print Drum and Remove Master |
|
|
Reset method |
Print-drum set sensor: OFF -> ON | |
|
Error point |
Error conditions |
|
|
525 |
Awaiting master removal | |
|
Error type |
A17 [Cutter error] | |
| A17-*** | ||
|
Panel display |
!! System Error !!
Rewind Master Roll and Close Master-Making Unit |
|
|
Reset method |
Master-loading set unit: OFF -> ON; master-detection sensor: OFF | |
|
Error point |
Error conditions |
|
|
209 |
ریسوگراف RP 3105 cutter home-position switch was OFF during master setting at ریسوگراف RP 3105 start of master making. | |
|
Error type |
A18 [Print drum unlocked] | |
| A18-*** | ||
|
Panel display |
Print Drum Unlocked
To Lock it Again, Pull it Out and ریسوگراف RP 3105n Set it Back in Place |
|
|
Reset method |
Print-drum safety switch: OFF -> ON | |
|
Error point |
Error conditions |
|
|
528 |
ریسوگراف RP 3105 print-drum lock position sensor is OFF and ریسوگراف RP 3105 print-drum lock cam sensor is ON, while ریسوگراف RP 3105 print-drum sensor safety switch is ON. | |
Option errors
|
Error type |
B01 [Keycard counter: No card] | |
|
Panel display |
B01-***
Insert Card into Key/Card Counter |
|
|
Reset method |
Insert Card | |
|
Error point |
Error conditions |
|
|
730 |
Keycard counter: No card | |
|
Error type |
B02 [Sorter: Error command 1] | |
|
Panel display |
B02-***
Check Sorter Panel Display |
|
|
Reset method |
Check Sorter | |
|
Error point |
Error conditions |
|
|
702 |
An error command was received (Serviceman-call error) from ریسوگراف RP 3105 sorter. | |
|
Error type |
B03 [Sorter: Error command 2] | |
|
Panel display |
||
|
Reset method |
Remove jammed paper | |
|
Error point |
Error conditions |
|
|
703 |
An error command was received (Jam error) from ریسوگراف RP 3105 sorter. | |
|
Error type |
B04 [Sorter: Error command 3] | |
|
Panel display |
B04-***
Close Sorter Cover |
|
|
Reset method |
Close ریسوگراف RP 3105 cover | |
|
Error point |
Error conditions |
|
|
707 |
An error command was received (Open error) from ریسوگراف RP 3105 sorter. | |
|
Error type |
B05 [Sorter: Error command 4] | |
|
Panel display |
B05-*** | |
| Check Sorter Panel Display | ||
|
Reset method |
Check ریسوگراف RP 3105 sorter | |
|
Error point |
Error conditions |
|
|
709 |
An error command was received (oریسوگراف RP 3105rs) from ریسوگراف RP 3105 sorter. | |
|
Error type |
B06 [Multi-tray: Main-unit error (Serviceman-call error)] | |
|
Panel display |
B06-*** | |
| !!System Error!! | ||
| Turn Main-Power SW OFF ریسوگراف RP 3105n ON | ||
| If Recovery has Failed, Call Service | ||
|
Reset method |
Jam reset or switch power on again | |
|
Error point |
Error conditions |
|
|
804 |
An error command was received (Main unit: Serviceman-call error) from ریسوگراف RP 3105 multi-tray unit. Even after 10 ms after ریسوگراف RP 3105 multi-tray transfer motor was turned ON, multi-tray feed limit sensor did not count any pulses. | |
|
Error type |
B07 [Multi-tray: Main-unit error (Jam-Feed joint pass)] | |
|
Panel display |
||
|
Reset method |
Sensor on paper-feed path -> OFF, jam reset, or switch ریسوگراف RP 3105 power on again | |
|
Error point |
Error conditions |
|
|
825 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 3 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 multi-tray feed sensor 4 did not turn ON. (Multi-tray feed sensor 1, 2: | |
|
826 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 4 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 paper sensor did not turn ON. (Multi-tray feed sensor 1, 2: OFF and 3, 4 | |
|
827 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After paper sensor turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 paper sensor did not turn OFF. (Multi-tray feed sensor 1, 2: OFF and 3, 4: ON, and p | |
|
828 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 4 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 paper sensor did not turn ON. (Multi-tray feed sensor 1 to 3: OFF and 4: | |
|
Error type |
B08 [Multi-tray: Main-unit error (Open)] | |
|
Panel display |
B08-*** | |
| Close Multi-Tray Transfer Unit | ||
|
Reset method |
Jam reset or switch power on again | |
|
Error point |
Error conditions |
|
|
805 |
Error command received (Main unit: Open error) from ریسوگراف RP 3105 multi-tray unit. Multi-tray transfer unit was opened. | |
|
Error type |
B09 [Multi-tray: Main-unit error (Jam-Multi tray transfer)] | |
|
Panel display |
||
|
Reset method |
Sensor on paper-feed path -> OFF, jam reset, or switch ریسوگراف RP 3105 power on again | |
|
Error point |
Error conditions |
|
|
816 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 1 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 multi-tray feed sensor 2 did not turn ON. (Multi-tray feed sensor 1stayed ON) or (multi-tray feed senosr 1: ON at power ON) | |
|
817 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 2 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 multi-tray feed sensor 3 did not turn ON. (Multi-tray feed sensor 1,2 stayed ON) or (multi-tray feed senosr 1, 2: ON at power ON) | |
|
818 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 3 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 multi-tray feed sensor 4 did not turn ON. (Multi-tray feed sensor 1 to 3 stayed ON) or (multi-tray feed senosr 1 to 3: ON at power ON) | |
|
819 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 4 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 paper sensor did not turn ON. (Multi-tray feed sensor 1 to 4 stayed ON) or ( multi-tray feed senosr 1 to 4: ON at power ON ) | |
|
820 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After paper sensor turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 multi-tray feed sensor 1 to 4 and paper sensor did not turn OFF. (Multi-tray feed sensor 1 to 4, and paper sensor stayed ON) or (multi-tray feed senosr 1 to 4 and paper | |
|
821 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 2 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 multi-tray feed sensor 3 did not turn ON. (Multi-tray feed sensor 1: OFF, 2:
ON) or (multi-tray feed senosr 2: ON at power ON) |
|
|
822 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 3 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 multi-tray feed sensor 4 did not turn ON. (Multi-tray feed sensor 1: OFF, 2, 3: ON) or (multi-tray feed senosr 2, 3: ON at power ON ) | |
|
823 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 4 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 paper sensor did not turn ON. (Multi-tray feed sensor 1: OFF, 2 to 4: ON) or ( multi-tray feed senosr 2 to 4: ON at power ON ) | |
|
824 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After paper sensor turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 paper sensor did not turn OFF. (Multi-tray feed sensor 1: OFF, 2 to 4: ON, paper sensor: ON) or (multi-tray feed senosr 2 to 4: ON and paper sensor: ON at power ON) | |
|
825 |
Error command received (Main unit: Jam error) from ریسوگراف RP 3105 multi-tray unit. After multi-tray feed sensor 3 turns ON, and multi-tray transfer motor rotates a certain amount of pulses, ریسوگراف RP 3105 multi-tray feed sensor 4 did not turn ON. (Multi-tray feed sensor 1, 2: OFF, 3: ON) or (multi-tray feed senosr 3: ON at power ON ) | |
|
Error type |
B10 [Multi-tray: Tray-1 error (Serviceman call)] | |
| B10-*** | ||
|
Panel display |
!! System Error !!
Turn Main-Power SW OFF ریسوگراف RP 3105n ON If Recovery has Failed, Call Service |
|
|
Reset method |
Jam reset or switch power on again | |
|
Error point |
Error conditions |
|
|
806 |
Error command received (Tray 1: Serviceman-call error) from ریسوگراف RP 3105 multi-tray unit. Even after 5 sec after multi-tray 1 elevator motor turned ON, counting of multi-tray feed limit sensor did not change. | |
|
Error type |
B11 [Multi-tray: Tray-1 error (Jam: Upper)] | |
|
Panel display |
||
|
Reset method |
Reset tray | |
|
Error point |
Error conditions |
|
|
807 |
Error command received (Tray 1: Jam error) from ریسوگراف RP 3105 multi-tray unit. Paper misfeed from tray 1. | |
|
842 |
Main unit misfeed when paper fed from tray 1 | |
|
Error type |
B12 [Multi-tray: Tray-1 error (No paper)] | |
|
Panel display |
B12-*** | |
|
Reset method |
Load paper | |
|
Error point |
Error conditions |
|
|
808 |
Error command received (Tray 1: No-paper error) from ریسوگراف RP 3105 multi-tray unit. | |
|
Error type |
B13 [Multi-tray: Tray-1 error (Open)] | |
|
Panel display |
B13-***
Set Feed Tray 1 in Place |
|
|
Reset method |
Set tray | |
|
Error point |
Error conditions |
|
|
809 |
Error command received (Tray 1: Open error) from ریسوگراف RP 3105 multi-tray unit. | |
|
Error type |
B14 [Multi-tray: Tray-1 error (Check tray)] | |
|
Panel display |
B14-***
Check Feed Tray 1 |
|
|
Reset method |
Jam reset or switch power on again | |
|
Error point |
Error conditions |
|
|
810 |
Error command received (Tray 1: Check-tray error) from ریسوگراف RP 3105 multi-tray unit. | |
|
Error type |
B16 [Multi-tray: Tray-2 error (Serviceman call)] | |
| B16-*** | ||
|
Panel display |
!! System Error !!
Turn Main-Power SW OFF ریسوگراف RP 3105n ON If Recovery has Failed, Call Service |
|
|
Reset method |
Jam reset or switch power on again | |
|
Error point |
Error conditions |
|
|
811 |
Error command received (Tray 1: Serviceman-call error) from ریسوگراف RP 3105 multi-tray unit. Even after 5 sec after multi-tray 1 elevator motor turned ON, counting of multi-tray feed limit sensor did not change. | |
|
Error type |
B17 [Multi-tray: Tray-2 error (Jam)] | |
|
Panel display |
||
|
Reset method |
Reset tray | |
|
Error point |
Error conditions |
|
|
812 |
Error command received (Tray 1: Jam error) from ریسوگراف RP 3105 multi-tray unit. Paper misfeed from tray 1. | |
|
843 |
Misfeed when paper is fed from tray 2 | |
|
Error type |
B18 [Multi-tray: Tray-2 error (No paper)] | |
|
Panel display |
B18-*** | |
|
Reset method |
Load paper | |
|
Error point |
Error conditions |
|
|
813 |
Error command received (Tray 2: No-paper error) from ریسوگراف RP 3105 multi-tray unit. | |
|
Error type |
B19 [Multi-tray: Tray-2 error (Open)] | |
|
Panel display |
B19-***
Set Feed Tray 2 in Place |
|
|
Reset method |
Set tray | |
|
Error point |
Error conditions |
|
|
814 |
Error command received (Tray 2: Open error) from ریسوگراف RP 3105 multi-tray unit. | |
|
Error type |
B20 [Multi-tray: Tray-2 error (Check tray)] | |
|
Panel display |
B20-***
Check Feed Tray 2 |
|
|
Reset method |
Jam reset or switch power on again | |
|
Error point |
Error conditions |
|
|
815 |
Error command received (Tray 2: Check-tray error) from ریسوگراف RP 3105 multi-tray unit. Multi-feed tray 2 limit SW is ON. | |
|
Error type |
B21 [Data storage: Read/Write error] | |
| B21-*** | ||
|
Panel display |
!! System Error !!
Turn Main-Power SW OFF ریسوگراف RP 3105n ON |
|
|
Reset method |
Switch power ON again. | |
|
Error point |
Error conditions |
|
|
714 |
Data-storage file-name error | |
|
715 |
Data-storage access error | |
|
716 |
Oریسوگراف RP 3105r data-storage error | |
|
Error type |
B22 [Job separator: Power off] | |
|
Panel display |
B22-***
!! No Power Supplied to ریسوگراف RP 3105 Job Separator !! |
|
|
Reset method |
Check and switch ON ریسوگراف RP 3105 power of job separator. | |
|
Error point |
Error conditions |
|
|
721 727 |
With ریسوگراف RP 3105 “Tape separation” function set ON, no power is supplied to ریسوگراف RP 3105 job separator when start key is pressed. | |
| After cluster-A signal turned ON, BUSY-signal stayed “L” more than 4 sec. | ||
|
Error type |
B23 [Job separator: No tape] | |
|
Panel display |
B23-***
No Paper Tape in Job Separator |
|
|
Reset method |
Check and set paper tape in job separator. | |
|
Error point |
Error conditions |
|
|
722 |
With ریسوگراف RP 3105 “Tape separation” function set ON, no tape remains when ریسوگراف RP 3105 start key is pressed. | |
|
723 |
No tape remains upon completion of ریسوگراف RP 3105 tape-ejection operation. | |
|
Error type |
B24 [Job separator: Jam] | |
| B24-*** | ||
|
Panel display |
Paper-Tape Jam in Job Separator Remove Paper Tape | |
|
Reset method |
Check and remove ریسوگراف RP 3105 jammed paper from job separator. | |
|
Error point |
Error conditions |
|
|
724 |
Tape remains when ریسوگراف RP 3105 start key is pressed with ریسوگراف RP 3105 “Tape separation” function set to
ON. |
|
|
725 |
ریسوگراف RP 3105 tape-jam detection signal is “H” within 500 ms after ریسوگراف RP 3105 cluster-A signal turns ON ( tape misfeed ). | |
|
726 |
ریسوگراف RP 3105 tape-jam detection signal is “L” when ریسوگراف RP 3105 BUSY signal changes from “L” to “H” (or after 5 sec. at “L”) after ریسوگراف RP 3105 cluster-A signal goes ON (tape misfeed). | |
|
Error type |
B25 [Sorter: Error command (Full error)] | |
|
Panel display |
B25-***
Check Sorter Panel Display |
|
|
Reset method |
Remove ریسوگراف RP 3105 paper from sorter. | |
|
Error point |
Error conditions |
|
|
704 |
Error command (Full error) received from ریسوگراف RP 3105 sorter | |
|
Error type |
B26 [Sorter: Error command (Print on bin error)] | |
|
Panel display |
B26-***
Check Sorter Panel Display |
|
|
Reset method |
Remove ریسوگراف RP 3105 paper from sorter. | |
|
Error point |
Error conditions |
|
|
705 |
Error command (Paper on bin error) received from ریسوگراف RP 3105 sorter | |
|
Error type |
B27 [Sorter: Error command (Staple error)] | |
|
Panel display |
B27-***
Check Sorter Panel Display |
|
|
Reset method |
Clear ریسوگراف RP 3105 stapler jam. | |
|
Error point |
Error conditions |
|
|
706 |
Error command (Staple error) received from ریسوگراف RP 3105 sorter | |
|
Error type |
B28 [Sorter: Error command (Size error)] | |
|
Panel display |
B28-***
Check Sorter Panel Display |
|
|
Reset method |
Remove paper from sorter. | |
|
Error point |
Error conditions |
|
|
708 |
Error command (Size error) received from ریسوگراف RP 3105 sorter | |
Consumable error
|
Error type |
C01 [Replace ink cartridge] |
| C01-*** | |
|
Panel display |
No Ink
Replace Ink Cartridge |
|
Reset method |
Ink-cartridge set sensor: OFF -> ON |
|
Error point |
Error conditions |
|
512 |
ریسوگراف RP 3105 ink sensor did not go ON even when inking was performed for ریسوگراف RP 3105 preset period. |
|
Error type |
C02 [Replace master roll] |
| C02-*** | |
|
Panel display |
No Master
Replace Master Roll |
|
Reset method |
Master-making unit sensor: OFF -> ON; master detection sensor: OFF -> ON |
|
Error point |
Error conditions |
|
200 |
ریسوگراف RP 3105 master end was detected twice in succession at 10-ms intervals during master transport. |
|
Error type |
C03 [Master disposal box full] |
|
Panel display |
C03-***
Empty Master Disposal Box |
|
Reset method |
Disposal-box safety switch: OFF for 5 s -> ON |
|
Error point |
Error conditions |
|
308 |
ریسوگراف RP 3105 compression detection position was reached before ریسوگراف RP 3105 master-compressionmotor limit-sensor count reached ریسوگراف RP 3105 specified level, after ریسوگراف RP 3105 master compression motor turned ON in ریسوگراف RP 3105 compression direction. |
Set check error
|
Error type |
D01 [Print drum not set] | |
|
Panel display |
D01-***
Set Print Drum in Place |
|
|
Reset method |
Print-drum safety switch: ON; Print-drum set signal: ON | |
|
Error point |
Error conditions |
|
|
526 |
ریسوگراف RP 3105 print-drum set signal was OFF. | |
|
527 |
ریسوگراف RP 3105 print-drum safety switch was OFF. | |
|
Error type |
D02 [Incorrect print drum] | |
|
Panel display |
D02-***
Print Drum of ریسوگراف RP 3105 Incorrect Type Installed |
|
|
Reset method |
Replace with ریسوگراف RP 3105 correct print drum. | |
|
Error point |
Error conditions |
|
|
532 |
ریسوگراف RP 3105 incorrect print drum was used. | |
|
Error type |
D03 [Ink cartridge not set] | |
|
Panel display |
D03-***
Install Ink Cartridge |
|
|
Reset method |
Ink-cartridge set sensor: ON | |
|
Error point |
Error conditions |
|
|
533 |
ریسوگراف RP 3105 ink-cartridge set sensor was OFF. | |
|
Error type |
D04 [Incorrect ink cartridge] | |
|
Panel display |
D04-***
Ink Cartridge of ریسوگراف RP 3105 Incorrect Type Installed |
|
|
Reset method |
Replace with ریسوگراف RP 3105 correct ink cartridge. | |
|
Error point |
Error conditions |
|
|
534 |
ریسوگراف RP 3105 incorrect ink cartridge was used. | |
|
Error type |
D05 [Master not set] | |
| D05-*** | ||
|
Panel display |
Master Not Set in Place
Insert Lead Edge of Master into Master Entrance and Close Master-Making Unit |
|
|
Reset method |
Master detection sensor: ON | |
|
Error point |
Error conditions |
|
|
210 |
ریسوگراف RP 3105 master detection sensor was OFF (blocked). | |
|
Error type |
D07 [Master disposal box not set] | |
|
Panel display |
D07-***
Set Master Disposal Box in Place |
|
|
Reset method |
Disposal-box safety switch: ON | |
|
Error point |
Error conditions |
|
|
310 |
ریسوگراف RP 3105 disposal-box safety switch was OFF. | |
|
Error type |
D08 [Master disposal unit not set] | |
|
Panel display |
D08-***
Close Disposal Top Cover |
|
|
Reset method |
Disposal-top-cover sensor: ON | |
|
Error point |
Error conditions |
|
|
311 |
ریسوگراف RP 3105 disposal-top-cover sensor was OFF (receiving). | |
|
Error type |
D09 [Master-making unit not set] | |
|
Panel display |
D09-***
Close Master-Making Unit |
|
|
Reset method |
Master-making-unit sensor: ON | |
|
Error point |
Error conditions |
|
|
212 |
ریسوگراف RP 3105 master-making-unit sensor was OFF (receiving). | |
|
Error type |
D10 [Scanner table not set] | |
|
Panel display |
D10-***
Close Scanner Table |
|
|
Reset method |
Flatbed set switch: ON | |
|
Error point |
Error conditions | |
|
213 |
ریسوگراف RP 3105 flatbed set switch was OFF. | |
|
Error type |
D11 [Front cover not set] | |
|
Panel display |
D11-***
Close Front Cover |
|
|
Reset method |
Front-cover switch: ON | |
|
Error point |
Error conditions | |
|
535 |
ریسوگراف RP 3105 front-cover switch was OFF. | |
|
Error type |
D12 [Feed-joint pass. Cover not set.] | |
|
Panel display |
D12-***
Close Feed-Joint Passage Cover |
|
|
Reset method |
Feed-joint pass. Cover safety switch: ON. | |
|
Error point |
Error conditions |
|
|
551 |
Feed-joint pass. ریسوگراف RP 3105 cover safety switch was OFF. | |
Warning (Serviceman call)
|
Error type |
E01 [Replace battery] |
|
Panel display |
!! Battery Replacement !!
Call Service |
|
Reset method |
Jam reset |
|
Error point |
Error conditions |
|
010 |
ریسوگراف RP 3105 battery voltage was less than 2.5 V when ریسوگراف RP 3105 power was switched ON (battery replacement). |
|
Error type |
E02 [Maintenance call] |
|
Panel display |
!! Maintenance !!
Call Service |
|
Reset method |
Jam reset |
|
Error point |
Error conditions |
|
011 |
ریسوگراف RP 3105 master counter reached ریسوگراف RP 3105 value set in test mode when ریسوگراف RP 3105 power was ON, ریسوگراف RP 3105 unit was reset, or operation ended. |
|
012 |
ریسوگراف RP 3105 copy counter reached ریسوگراف RP 3105 value set in test mode when ریسوگراف RP 3105 power was ON, ریسوگراف RP 3105 unit was reset, or operation ended. |
|
022 |
ریسوگراف RP 3105 maintenance counter inside ریسوگراف RP 3105 print drum reached ریسوگراف RP 3105 value set in test mode when ریسوگراف RP 3105 power was ON, ریسوگراف RP 3105 unit was reset, or operation ended. |
Warning (oریسوگراف RP 3105r)
|
Error type |
F01 [No master on drum] |
|
Panel display |
No Master on Print Drum
Make a New Master |
|
Reset method |
Close, reset, or change mode. |
|
Error point |
Error conditions |
|
015 |
ریسوگراف RP 3105re was no master on ریسوگراف RP 3105 print drum at ریسوگراف RP 3105 start of printing. |
|
Error type |
F02 [Master image larger than paper size] |
| Page Format Larger than Paper Size | |
|
Panel display |
!! Possible Ink Smudges on Prints !!
( Continue -> START Key ) |
|
Reset method |
Stop, reset, or start. |
|
Error point |
Error conditions |
|
018 |
ریسوگراف RP 3105 paper size did not match ریسوگراف RP 3105 image on ریسوگراف RP 3105 print drum at ریسوگراف RP 3105 start of printing. |
|
016 |
Printing was attempted using a non-standard paper size. |
|
Error type |
F04 [Original not set (Multi-page mode)] |
|
Panel display |
Set Anoریسوگراف RP 3105r Original and Press Start Key
To Cancel, Press Stop Key |
|
Reset method |
Set original. |
|
Error point |
Error conditions |
|
013 |
ریسوگراف RP 3105 original was not set when multi-page mode was started. |
|
Error type |
F05 [Print quantity under “Minimum print quantity”] |
|
Panel display |
Enter Print Quantity Over **
Programmed Minimum Value |
|
Reset method |
Set a print quantity over ریسوگراف RP 3105 minimum print quantity. |
|
Error point |
Error conditions |
|
019 |
mode. |
|
Error type |
F07 [Drum-position error] |
|
Panel display |
!! Print Drum is Not in Neutral Position !!
Press Print-Position Centering Key to Shift Back Print Drum |
|
Reset method |
Press centering key. |
|
Error point |
Error conditions |
|
014 |
ریسوگراف RP 3105 print drum was not centered at ریسوگراف RP 3105 start of master making. |
|
Error type |
F08 [Paper size / original size: mismatch] |
|
Panel display |
!! Current Paper Size Incorrect !!
Change Paper Size |
|
Reset method |
Change ریسوگراف RP 3105 paper size or original size. |
|
Error point |
Error conditions |
|
017 |
A paper size (write size) corresponding to ریسوگراف RP 3105 original size (read size) was not set for Triple-Tray Source selection. |
|
Error type |
F10 [Master image larger than paper size: 2] |
| !! Page Format Larger than Paper Size !! | |
|
Panel display |
Possible Ink Smudges on Prints ( Continue -> TEST Key ) |
|
Reset method |
Stop, reset, or start test printing. |
|
Error point |
Error conditions |
|
021 |
ریسوگراف RP 3105 paper size did not match ریسوگراف RP 3105 image on ریسوگراف RP 3105 print drum at ریسوگراف RP 3105 start of test printing. |
|
Error type |
F11 [Master image larger than paper size: 3] |
|
Panel display |
Paper in Paper-Feed Tray has Been Changed Change Paper Data |
|
Reset method |
Set ریسوگراف RP 3105 paper size (master size) in ریسوگراف RP 3105 paper-feed tray. |
|
Error point |
Error conditions |
|
023 |
ریسوگراف RP 3105 paper size did not match ریسوگراف RP 3105 image on ریسوگراف RP 3105 print drum at ریسوگراف RP 3105 start of master making, when ریسوگراف RP 3105 paper loaded into ریسوگراف RP 3105 paper-feed tray was changed. |
|
Error type |
F12 [Original size irregular: Triple-Tray Source] |
|
Panel display |
!! No Auto Paper-Size Selection with Irregularly Sized Original !! Select Paper Size |
|
Reset method |
Close or reset. |
|
Error point |
Error conditions |
|
024 |
A non-standard-size original was set at ریسوگراف RP 3105 start of operation with ریسوگراف RP 3105 Triple-Tray Source selected. |
|
Error type |
F16 [ADF cannot be used for QT-4] |
|
Panel display |
!! No QT-4 Sheets for Original Scanning in ADF !!
Place Original on ریسوگراف RP 3105 Platen Glass |
|
Reset method |
Remove ریسوگراف RP 3105 original from ریسوگراف RP 3105 ADF. |
|
Error point |
Error conditions |
|
039 |
ریسوگراف RP 3105 original was set on ریسوگراف RP 3105 ADF when operation was started with QT-4 set. |
|
Error type |
F17 [Change in drum size] |
|
Panel display |
Drum Type has Been Changed
Select Same Drum Type as That of ریسوگراف RP 3105 Drum Inserted |
|
Reset method |
Set ریسوگراف RP 3105 print-drum size. |
|
Error point |
Error conditions |
|
027 |
A different size print-drum size was set. |
|
Error type |
F18 [Incorrect zoom rate] |
|
Panel display |
!! Images may Not be Just in Frame of Paper with This Reproduction Size !!
Check Current Selection (Continue -> START Key) |
|
Reset method |
Change reproduction size, or start master-making operation. |
|
Error point |
Error conditions |
|
043 |
ریسوگراف RP 3105 paper size did not match ریسوگراف RP 3105 original size*reproduction size when ریسوگراف RP 3105 mastermaking operation was started with ریسوگراف RP 3105 manual tray selected. |
|
Error type |
F19 [Master image larger than paper size: 4] |
|
Panel display |
Paper in Tray 1 has Been Changed Change Paper Data |
|
Reset method |
Set ریسوگراف RP 3105 paper size for tray 1. |
|
Error point |
Error conditions |
|
040 |
ریسوگراف RP 3105 paper size set did not match that of ریسوگراف RP 3105 actual paper loaded when ریسوگراف RP 3105 paper in tray 1 was replaced. |
|
Error type |
F20 [Master image larger than paper size: 5] |
|
Panel display |
Paper in Tray 2 has Been Changed Change Paper Data |
|
Reset method |
Set ریسوگراف RP 3105 paper size for tray 2. |
|
Error point |
Error conditions |
|
041 |
ریسوگراف RP 3105 paper size set did not match that of ریسوگراف RP 3105 actual paper loaded when ریسوگراف RP 3105 paper in tray 2 was replaced. |
|
Error type |
F21 [ADF multi-up: Original not set] |
|
Panel display |
Set Anoریسوگراف RP 3105r Original
To Cancel, Press Stop Key |
|
Reset method |
Set ریسوگراف RP 3105 original on ریسوگراف RP 3105 ADF, or stop ریسوگراف RP 3105 ADF multi up. |
|
Error point |
Error conditions |
|
032 |
ریسوگراف RP 3105 next original was not in place for ADF multi-up. |
|
Error type |
F22 [FB multi-up: Original not set] |
|
Panel display |
Place Anoریسوگراف RP 3105r Original and Press Start Key To Cancel, Press Stop Key |
|
Reset method |
Place ریسوگراف RP 3105 original on ریسوگراف RP 3105 flatbed, or stop ریسوگراف RP 3105 FB multi up. |
|
Error point |
Error conditions |
|
033 |
ریسوگراف RP 3105 next original was not in place for flatbed multi-up. |
|
Error type |
F23 [Communication error: D to P] |
| Communication Error | |
|
Panel display |
Check Communication Devices and Cables ریسوگراف RP 3105n Press [OK] Button |
|
Reset method |
Jam reset |
|
Error point |
Error conditions |
|
044 |
Communication error in remote mode (D to P mode) |
|
Error type |
F24 [Auto reproduction-size selection: unable] |
| !! No Auto Reproduction-Size Selection with This Combination of Original and Printing | |
|
Panel display |
Paper !!
Select Size Manually. Press “OK” or “RESET” to clear ریسوگراف RP 3105 message. |
|
Reset method |
Set ریسوگراف RP 3105 reproduction size manually. |
|
Error point |
Error conditions |
|
038 |
ریسوگراف RP 3105 reproduction size was not consistant with ریسوگراف RP 3105 operable range when operation was started with ریسوگراف RP 3105 auto reproduction size. |
|
Error type |
F25 [Incorrect image resolution] |
|
Panel display |
!! ریسوگراف RP 3105 Image Resolution of ریسوگراف RP 3105 Current Data has Just been Converted !!
( Continue -> START Key ) |
|
Reset method |
Jam reset or start key |
|
Error point |
Error conditions |
|
045 |
Data was received with a inconsistent image resolution (D to P mode). |
|
Error type |
F26 [Incorrect paper size: Long-paper mode] |
|
Panel display |
!! Paper-Size Selection Incorrect !!
Change Selection |
|
Reset method |
Check ریسوگراف RP 3105 paper size. Press “OK” or “RESET” to clear ریسوگراف RP 3105 message. |
|
Error point |
Error conditions |
|
413 |
ریسوگراف RP 3105 paper sensor was ON when paper should have left ریسوگراف RP 3105 paper sensor without ریسوگراف RP 3105 long-length paper mode set (ریسوگراف RP 3105 paper was a long-lenth paper). |
|
419 |
ریسوگراف RP 3105 paper left ریسوگراف RP 3105 paper sensor too soon with ریسوگراف RP 3105 long-length paper mode set (ریسوگراف RP 3105 paper was not a long-length paper). |
|
Error type |
F30 [Multiple paper feed] |
|
Panel display |
!! Possible Multiple Paper Feed !!
Check Printed Copies |
|
Reset method |
Check ریسوگراف RP 3105 printed copies. Press “OK” or “RESET” to clear ریسوگراف RP 3105 message. |
|
Error point |
Error conditions |
|
420 |
Multiple paper feed was detected during operation (when no paper-ejection jam error occurs). |
|
425 |
Paper conforming to data obtained in ریسوگراف RP 3105 light-transmission check was fed in multiple. |
|
426 |
Paper was fed in multiple during ریسوگراف RP 3105 light-transmission check. |
|
427 |
Paper conforming to data obtained in ریسوگراف RP 3105 paper-sensor OFF check was fed in multiple. |
|
428 |
Paper was fed in multiple during ریسوگراف RP 3105 paper-sensor OFF check. |
|
Error type |
F31 [Auto stack-tray error] |
|
Panel display |
Check Paper-Receiving Tray |
|
Reset method |
Check ریسوگراف RP 3105 paper guides or press ریسوگراف RP 3105 start key. Press “OK” or “RESET” to clear ریسوگراف RP 3105 message. |
|
Error point |
Error conditions |
|
830 |
ریسوگراف RP 3105 HP sensor does not go ON during paper-guide home positioning. |
|
837 |
ریسوگراف RP 3105 HP sensor does not go OFF when ریسوگراف RP 3105 paper guides are moved. |
|
838 |
ریسوگراف RP 3105 HP sensor does not go ON during paper-stopper home positioning. |
|
839 |
ریسوگراف RP 3105 HP sensor does not go OFF when ریسوگراف RP 3105 paper stopper is moved. |
|
Error type |
F32 [Data storage area full] |
|
Panel display |
!! Data-Storage Area Full !!
Clear Old Storage Data to save New Data. |
|
Reset method |
Check ریسوگراف RP 3105 available storage area. Press “OK” or “RESET” to clear ریسوگراف RP 3105 message. |
|
Error point |
Error conditions |
|
713 |
Insufficient memory available when data is written to ریسوگراف RP 3105 data-storage area |
|
Error type |
F33 [Master image size / Drum size: mismatch] |
|
Panel display |
!! Unmatched Size — Print Drum and Image Area !!
Check Print Drum (Continue -> START Key) |
|
Reset method |
Check ریسوگراف RP 3105 print drum size, or start making master by pressing ریسوگراف RP 3105 start key. |
|
Error point |
Error conditions |
|
047 |
ریسوگراف RP 3105 master size did not match ریسوگراف RP 3105 drum size when P-to-P master making was started. |
|
048 |
ریسوگراف RP 3105 master size did not match ریسوگراف RP 3105 drum size when D-to-P master making was started. |
|
Error type |
F37 [ADF cannot be used in book mode] |
|
Panel display |
ADF Cannot be Used In Book Mode Use Scanner Table |
|
Reset method |
Set ریسوگراف RP 3105 original on ریسوگراف RP 3105 flatbed, or cancel book mode. Press “OK” or “RESET” to clear ریسوگراف RP 3105 message. |
|
Error point |
Error conditions |
|
050 |
ریسوگراف RP 3105 original was set on ریسوگراف RP 3105 ADF with book mode set when master making was started. |
|
Error type |
F40 [No paper in paper-feed tray: Triple-Tray Source] |
|
Panel display |
Load Paper in Feed Tray |
|
Reset method |
Load paper. |
|
Error point |
Error conditions |
|
060 |
No-paper error occurred during proof printing with ریسوگراف RP 3105 straight feed tray selected from ریسوگراف RP 3105 Triple-Tray Source. |
|
Error type |
F41 [No paper in tray 1: Triple-Tray Source] |
|
Panel display |
Load Paper in Tray 1 |
|
Reset method |
Load paper. |
|
Error point |
Error conditions |
|
060 |
No-paper error occurred during proof printing with Tray 1 selected from ریسوگراف RP 3105 Triple-Tray Source. |
|
Error type |
F42 [No paper in tray 2: Triple-Tray Source] |
|
Panel display |
Load Paper in Tray 2 |
|
Reset method |
Load paper. |
|
Error point |
Error conditions |
|
060 |
No-paper error occurred during proof printing with Tray 2 selected from ریسوگراف RP 3105 Triple-Tray Source. |
Paper-jam error
|
Error type |
Panel display |
| Gxxx | |
|
Panel display |
Paper Jam
Check Indicated Areas and Press [OK] |
ریسوگراف RP 3105 errors specified below are backed up and are not cleared even when ریسوگراف RP 3105 power is switched off.
|
Error type |
Details |
|
T01 |
Main motor lock |
|
T03 |
Clamp motor lock |
|
T13 |
Cutter motor lock |
|
A03 |
Cutting error |
|
A04 |
Master disposal error |
|
A16 |
Awaiting master removal |
|
A17 |
Cutter error |
|
C01 |
Replace ink cartridge |
|
C02 |
Replace master roll |
|
C03 |
Master disposal box full |
اشتراک گذاری در:
در خبرنامه ما عضو شوید
تمامی حقوق این سایت متعلق به کپی ایران بوده و هر گونه بهرهبرداری از آن مستلزم کسب اجازه میباشد.